itnewsbot, to esp32
@itnewsbot@schleuss.online avatar

A Spinning Egg For Your Thoughts? - Brushless motors are fascinating devices that come in all sorts of shapes and size... - https://hackaday.com/2023/10/01/a-spinning-egg-for-your-thoughts/

InCameraNet, to 3DPrinting

I usually sand my pieces to a gloss but I am so sick of that I tried finishing a set of magnet sliders with UV resin. I sanded the surface up to 600 grit and then cleaned it with isopropyl alcohol. After curing, the top coat instantly delaminated when I pulled the masking tape off the edges. Chucking these into the fail bag.

InCameraNet, to ADHD

Hexagon tile magnet slider prototype. Produced October 2022. Epoxy resin. Transparent blue. ~50mm diameter. 13.8mm thick. 25.9 grams. 4mm magnets. Polished up to 2000 grit. Not for sale.

image/png
image/png

InCameraNet, to ADHD

Hexagon tile magnet slider prototype. Produced October 2022. Colorless epoxy resin. 4mm magnets. 49mm diameter. 12.4mm thick. 24.4 grams. Polished up to 800 grit. Not for sale.

image/png
image/png

  • All
  • Subscribed
  • Moderated
  • Favorites
  • Leos
  • kavyap
  • GTA5RPClips
  • osvaldo12
  • Backrooms
  • DreamBathrooms
  • magazineikmin
  • ngwrru68w68
  • Youngstown
  • slotface
  • mdbf
  • InstantRegret
  • everett
  • rosin
  • provamag3
  • cubers
  • modclub
  • ethstaker
  • thenastyranch
  • khanakhh
  • cisconetworking
  • Durango
  • hgfsjryuu7
  • tester
  • anitta
  • normalnudes
  • tacticalgear
  • JUstTest
  • All magazines