It's really fairly simple, a 3/16" lexan sandwich with furniture feet, brass tube and screw hardware with wingnuts. The keyboard is mounted with velcro, and the other parts, under the keyboard, in clude a 10000mAh 37 wHr battery and matching BMS, a USB 3.0 USB hub which also provides my main storage in a 128GB (arbitrary size) SDXC solid state memory card. I have the Pi firmware patched to boot from any compatible USB storage device, and that's it there in that hub, situated over top of the battery. The pi is to the left. It's all pretty conventional, just ... assembled :)
There is a lot of space remaining under the right hand side, intended for additional device mounting at a later date.
Fun fact : the hub is a fake usb 3.0 in originally (it has 3x usb 2 + 1x fake usb 3 + 1x type c.) the hub used a usb 2 hub chip from china Also std* and GND_DARIN pin was not conect to the hub chip . it connected to the usb 3 port directly. (Right it is used for connect to the kbd.)
Also the typec cable with otg cable that support charging.have fake usb 3 . it only has 4pin inside
Anyway fake usb 3 isnt a issue bc this phone only support usb 2
Cyberdecks
Hot