Parametric hinge (www.printables.com)
Cord Wall Pass-through (www.printables.com)
Nemesis Boardgame: Fast Setup Organizer by ogre_ergo_sum (www.thingiverse.com)
This Nemesis organizer is designed for ease of setup and packing away. Top layer trays go to the table. Cards stay sorted in the organizers. Everything packs away into the original box. This incredible convenience comes at a cost. 1.4kg of PLA and 40 hours of printing on a Bambu @ 0.20 layer thickness. No support required.
IKEA Harbor Freight Parts Case Rail Adapters (www.printables.com)
V1. - 08/23/2023 - Rails to print that allow you to fit a Harbor Freight Storage Parts Case into an Ikea Trofast. 2 different size rails, one for left and one for right. I used ½" pan head screws to screw into the side. Just start stacking them from the bottom. Printed at standard settings on a Bambu X1C. Included Fusion 360...
Kitchen hanger by Adrenalinxd (www.thingiverse.com)
Simple kitchen hanger
Designed a Master Spool that is easy to print (lemmy.one)
Designed an easy to print spool held together by M3 screws. No supports necessary. Master Spool standard....
Storage for 12g CO2 cartridges by MioXAnder (www.thingiverse.com)
Stores up to 8 12g CO2 cartridge for airsoft. Feel free to post your photos =)
Cable Clip For 3M Comand Tab by KakeruNekobeya (www.thingiverse.com)
Cable clip for 3M command tabs. Please use M size command tab.
Skateboard Holder (www.printables.com)
Extractor Fan (160mmx160mm) to 100mm Fan duct by mint_dulip (www.thingiverse.com)
A converter that allows attachment of a 100mm hose to standard in wall extractor fan (160mmx1600m). I use this to allow me to extract heat/fumes from my 3d printer enclosure using my workshops built in extractor fan.
Replacement wheel for a child's RC car (lemmy.world)
My kids are both pretty young, but 3D printed odds and ends keep making their way into their toy collection as they inevitably break things. They’re still pretty young, but they’re very interested in the measure -> CAD -> print loop.
FairPhone 4 holder for cars by BogusFiction (www.thingiverse.com)
This is a Holder for a Fairphone 4. I designed it to replace a holder I already had in my car that was too small for the fairphone, so there were parts, that I already had installed and reused. (Ball-joint and gooseneck) I included a stub balljoint with a throat od of 5mm that has a 2.5mm bore so you can screw a m3 bolt in...
[with release hole] Zipper Pull using paperclip by HtXF (www.thingiverse.com)
I added a hole to be able to release the clip after it clicked. No other changes to it. The original part: https://www.thingiverse.com/thing:2594163 The idea for the hole: https://www.thingiverse.com/thing:5364218
3D4U by Miele Borehole Cleaning Aid by miele_3D4U (www.thingiverse.com)
English The 3D4U Borehole Cleaning Aid ensures that your hands are free when working with a drill. Mounted on the hand-piece, this accessory automatically secures itself to the wall. For this purpose, the base plate was optimized for the airflow by computer simulation. The nine openings draw in the dust that accumulates around...
PVC pipe construction set, ver.2 by DonaldJ (www.thingiverse.com)
Parts designed to use multiple lengths of 1/2 inch Schedule 40 PVC pipe for greater strength and rigidity. . Also may be used with wooden dowels (of appropriate size) if the use of PVC offends your sensibilities.
Cable organizer by Papos98 (www.thingiverse.com)
Cable organizer.
Designed and printed housings for old lights to mount under my kitchen (i.imgur.com)
Was gifted some old lights that were designed to be stuck into holes in wood. Didn’t want to drill holes that big into my kitchen cabinets, so I designed and printed these holders that can be screwed to the cabinets and hold the lights. Also the lights are surrounded by it, so they don’t glare. Here are the results:...
Wall mounted Key and Wallet holder by DrKronos (www.thingiverse.com)
All the things you need when leaving your home ready to go! A Shelf for your wallet and magnetic holders for two sets of keys. The design has compartments for magnets with a diameter of 10mm max. Blender file included.
PremiumCord USB 3.0 extender cable Desk Mount by Krasovna (www.thingiverse.com)
This design has been updated with AUX port. You can find this new design at: https://www.thingiverse.com/thing:5767765 My PC has USB 3.0 ports only from its back (yes, it is already getting mature). I wanted to bring some of these to my desk to avoid having to 'deep dive' every time I need to connect something reasonably fast...
Dremel 3000 mount by Kurck (www.thingiverse.com)
I wanted to mount my Dremel to a bench, but the original model by Faklam had a ring the Dremel didn't fit though (I later realised that the top can be screwed off). So I cleaned up the model, made the ring bigger, and ended up almost remodelling the whole thing. Unlike the original, the head of the tool is pressed against the...
Opening of bottles with screw caps by ChristianGir (www.thingiverse.com)
Deux appareils pour faciliter l'ouverture des bouteilles avec bouchons vissés. pour les fixer sur votre réfrigérateur vous pouvez coller 4 aimants diamètre 6X2mm. Voici un lien pour les aimants. Vous pouvez imprimer séparément les deux fichiers....
Toggle latch - no supports - print in place - M4 screw holes by MuteSkier (www.thingiverse.com)
Small latch for cabinet, little door, to attach something to other thing. Works well also as printer test. Gap between parts is 0.2 mm. Can be printed fully working on place without supports as shown on video. If you have problems with movement most likely problem is stringing. https://youtu.be/MCwRCMNyMc4
Hose Holder Flexi 100mm by bradmantom (www.thingiverse.com)
100mm flexi hose holder
1 1/4in Pool Hose Adaptor by ShownZebra (www.thingiverse.com)
This adaptor is to connect 1 1/4in hose to 1 1/4in hose. I've used 2x R-20 o-rings and it seems to seal well or you can use Intex 1.25in Dia Hose Seal.