3dprinting

My makeshift enclosure filament holder. Very happy with this set-up! (lemmy.world)

Hi guys, it’s The Clog Guy, thought I’d try to share something other than problems…...

Does anyone print planter heads? (sh.itjust.works)

[Troubleshooting] Big stringing problem with flsun SR and Orcaslicer (lemmy.nz)

Ok guys, I’m breaking down and posting here to see if anyone has any ideas. I’m greatful for any advice....

[Troubleshooting] Clog Guy is back, and things have completely ceased making sense.

Hi guys. Please check my previous post for any background questions, I don’t have it in me to go over everything again....

First level printing too tall (lemmy.today)

Hi - Tenlog TLD3-Pro, printing with branx new Overture PLA+, printing an OpenSCAD exported STL sliced with Cura 5.7.1 (most recent as of yesterday)....

What's your go-to "Bang for your Buck" filament brand?

As I’m graduating college in a few weeks, I’ll be losing access to my university’s free printers and filament. I’m going to build up a home lab with a couple printers where I can make goofy little mechanical projects as well as some components for my cars and stuff....

I made a 3D printed mechanical digital clock (lemmy.world)

Youtube video...

Heart Shaped Container FreeCAD Tutorial (pawb.social)

Made a FreeCAD tutorial for making this container: https://makertube.net/w/mg7rdKStSUua7AhnAt1RoM I have to warn you that I made a bunch of mistakes and it may be really hard to follow.

I've got a mix of good, bad, good, bad, and good again news/progress (lemmy.world)

This is a follow up from my spaghetti post a few days ago....

Gridfinity 2x2 organizer for my bathroom (files.catbox.moe)

Printed out this little bathroom or whatever organizer. Gridfinity is neat. Choose your bins, glue to the base and viola....

I designed a 3D Printable e-reader case for Kobo's newest E-Readers (lemmy.world)

You can download the files on:...

pooch/repkord made a printer lift itself (files.catbox.moe)

Source twitter.com/repkord/status/1788529858978717870...

Carboy dryer, stackable, for homebrewing. (OC) (files.catbox.moe)

STL printables.com/…/866603-carboy-dryer-stackable...

3D-Printed USB Dead Man Switch (Prototype Demo) (www.buskill.in)

Today we’re ecstatic to publish our first demo showing a homemade BusKill Cable (in the prototype 3D-printed case) triggering a lockscreen....

Resin Printing: Good for a Beginner with Limited Space?

I have recently obtained a friend’s old Formlabs Form 2 SLA printer. I I am an absolute beginner to printing, but I am pretty excited to get into it....

I designed a filament dryer mount for my tukkari mk4 enclosure (imgur.com)

My SUNLU S1 Plus filament dryer was slipping around getting yanked forward on my TUKKARI TLX MK4 enclosure, so I designed this mount which fits into the existing slots on top of the enclosure. Prints in two pieces that screw together since otherwise the supports would be complicated. Had to print the larger piece on my big bed...

Chonky nozzel + decent amount of material = opportunity for lots of spaghetti (lemmy.world)

Any suggestions before trying again after a reset? This is my first go round changing nozzle diameter. I went from a 0.4 mm nozzle to a 0.6 mm nozzle....

Very Specific Object: knockoff transformer parts! (lemmy.world)

Our youngest broke his big brother’s bumblebee. Three iterations later, everything fits pretty well and the older one is happy to have bumblebee back....

Question about printing times (www.thingiverse.com)

Hello all. I am very new to this but it is all very cool to me. I ran into a problem and I am not sure how to troubleshoot it. I downloaded a simple pull string helicopter off thingiverse. After running through the slicer software, the estimated build time is 131 hours. Relative to it’s size this seems insane. If I “run the...

Giant 11x11 Ball [Matt Bahner] (www.youtube.com)

cross-posted from: sh.itjust.works/post/18848847...

Micronics Micron 3D - $3000 Desktop SLS printer (www.youtube.com)

How do you build complex shapes? (i.imgur.com)

I’ve made a large number of custom prints, and all of them were created using TinkerCad. It’s an amazing toolkit, stupid easy to use but versatile. That is … until something needs a tiny adjustment somewhere. That’s when I feel it would’ve been neat to use parametric CAD instead....