This magazine is from a federated server and may be incomplete. Browse more on the original instance.
I was checking to see how a 3/4" dog hole would look in a vise jaw made from two 3/4" pieces of plywood. Just clamped for the test, but would be glue for the real thing. Interesting to see the hole opened up. And luckily no splitting, but do you think it would work as an actual vise jaw? This is for a Veritas quick release front...
I’m trying to make my own window sills in our new house. We have windows rather deep so depth is around 9in and wide - 42/60in. I’m looking at read oak vs douglas fir. Red oak is mainly available in sub 8in cuts. The only one I found in 9in is 3/4 thick. Would that be sufficient to support plant pots or potentially human...
I’m not sure where the right place to post this would be, but here goes....
For some clarity, I did not make the speakers, but attempted to match the wood as closely as I could for the credenza.
I had an old can of poly in the basement, and decided to give it a try. Thin crust on top, poured kind of like egg whites. But after mixing with mineral spirits it seemed smooth, and the result on my new plywood workbench top is smooth and fully cured as far as I can tell. workbenchsurface
Using cedar 2x4s cut to 1.5x3. Planning to seal with outdoor polyurithane varnish. Any thoughts on the design thus far?...
cross-posted from: lemmy.world/post/15221988...
I made this from a long piece cherry offcut that I’ve had sitting around for ages. Here’s a better picture of the interesting bit:...
Part of a larger project I’m working on, which takes the “waste sawdust” and grows a Reishi mushroom out of it.
I realize this is a woodworking community so don’t kill me, but I’m in the process of upgrading my tablesaw with a new fence so it’s somewhat related. Plus there’s no metalworking community that I could find on Lemmy....
https://lemmy.ca/pictrs/image/bdc1927e-6392-473a-93ee-fe019acad74a.jpeghttps://lemmy.ca/pictrs/image/26f34480-b64c-49b7-b317-aecaefa91c4b.jpeghttps://lemmy.ca/pictrs/image/e3aa9e02-71bc-4464-8baa-f67a88f45564.jpeghttps://lemmy.ca/pictrs/image/c5d9122f-b1b3-4591-aee2-a8753673c5e9.jpeg
What’s a good basic table saw? I look at them online and can’t really tell much a difference. I’m tempted to just get a harbor freight one but know the fence will probably be loose and other annoyances…...
I want to make my own bed, and have several example pictures. Where do people find plans for their furniture?
As we didn’t find any shelf of our liking we tried to create it ourself. It worked out better than expected, however it obviously isn’t perfect. But as completely laymans we are happy nonetheless....
https://lemmy.ca/pictrs/image/d8c91fad-90ab-4dee-bc30-36412c61f732.jpeghttps://lemmy.ca/pictrs/image/89f3ac08-c51a-452e-8c2a-aef62ace4c12.jpeghttps://lemmy.ca/pictrs/image/381f0fb6-daf9-4230-8d11-17e4a45900d7.jpeghttps://lemmy.ca/pictrs/image/93ed062a-17d0-47a5-8b26-40b34dd070e3.jpeghttps://lemmy.ca/pictrs/image/ae8ce638-3f63-4eb6-a212-01735a3d1454.jpeghttps://lemmy.ca/pictrs/image/9ca75224-a264-4154-925d-11ac95e2d1ff.jpeghttps://lemmy.ca/pictrs/image/13e66603-b80f-45d6-8c46-b7c33ec6ace4.jpeghttps://lemmy.ca/pictrs/image/d2623d96-42ea-48de-b611-c1f676a6d5a8.jpeghttps://lemmy.ca/pictrs/image/605e9a05-3288-43aa-b3a6-1d3ffc016d8b.jpeghttps://lemmy.ca/pictrs/image/b206bed0-f6f5-4117-8699-88228050ca57.jpeghttps://lemmy.ca/pictrs/image/db878bce-2338-4c5f-8edf-0cc892f2ca28.jpeghttps://lemmy.ca/pictrs/image/b8342896-534c-4482-adb0-846b1e1f9c7b.jpeghttps://lemmy.ca/pictrs/image/6024ffc5-7fdb-4740-bd12-f154d89f0687.jpeghttps://lemmy.ca/pictrs/image/9bbdc3c8-bab7-43ec-8769-aef1df5dd9c6.jpeg...
I made a joiners mallet. I’m trying to challenge myself by only hand tools. The wood was found in the basement; I think hickory head and I have no idea what the handle pieces are. The handle and head were each laminated and the handle was mortised in, wedged, and glued. I rounded out the handle with a spokeshave and rasp....
Nothing too fancy and not super precise, basically cut a strip of wood to size with a hand saw and made notches for the pieces to fit together using the same hand saw and a chisel. :)
Well, I guess it could handle stuff a good bit wider than 30cm. Mystery wood, but probably red oak. Just a rabbet on each piece, some hardboard (narrower than the print) to connect them, and commodity hanging hardware. Broke the edges with a hand plane, then a light sanding and finished with Danish Oil.
I built this garden shed to hold potting supplies and lawn tools for my bonsai garden. It was a fun exercise playing with the nail gun and I didn’t even stab myself. The shed definitely is not plumb or square, but it hasn’t fallen over yet so I’m pleased.
To make the space above our massive heater a bit more useful, I hacked together this little shelf from some second hand wood that I bought from somebody in our area. It’s made entirely with hand tools and held together by screws and prayers due to the funky shape of the back side of the heater....
A simple shaker style table in white oak, finished with spar urethane and kitty approved....
I recently stumbled on to Witco style artwork and came across the piece pictured here. I’d like to try my hand at creating something similar, but wasn’t sure how to approach the boat bodies....
