Personally java is still my favorite language. I program in others as well but when I’m free to pick a language java is still my go-to and I love a lot of the new features that have been added. This project is definitely really cool and I might even give it a drive.
The main disadvantage of ULAs is in dual stack networks windows prefers IPv4 over them. In principle Linux should too but glibc follows an older RFC and as a result in practice picks ULAs over IPv4. If your GUA space is subject to change I would definitely recommend ULAs. Dynamic DNS is more headache than it’s worth. As others have mentioned I would keep IPv4 out of your internal DNS so that ULAs are preferred, if you want to dual stack your internal DNS then there are ways to configure clients to prefer ULAs over v4. Personally I run both ULAs and GUAs internally even with my own direct allocation but that’s because of dn42. What I do on my gateways to prevent leaks is I have a routing policy that returns an ICMP host unreachable if source is fd00::/8 and destination is 2000::/3 that way the gateway blocks any address mismatch. I also have a policy for the opposite GUA to ULA scenario. One other note, technically ULAs are supposed to be random /48s, others have mentioned generating a /40 but that’s not technically in spec. Ideally you would generate one /48 per site or use a single /48 and then do a /56 per site. Obviously do what you want and what makes the most sense for you but I’m going to put that info out there.
TIL that apparently capital one was assigned the entire 2630::/16 block…which is the largest assignment I’ve seen to date. Does anyone know of other absolutely massive allocations…are there even any others this large?
I knew about 2003::/19 being allocated to DTAG but this list is an awesome summary and I didn’t know about the rest. The /19 going to the UK MoD is not surprising since they have 25/8 in v4 land. It is really weird that it’s capital one…like…ISPs and military always ends up with a lot of IP space…but why capital one?? Also the description of the space is internal space??? Especially since as of now they haven’t announced any of that space. I really hope it’s not just like a large private space, that’d be obscene. It really makes no sense to me. I can’t imagine they’d need…4 billion /48s…
Some advice for process parents. Don’t be that kinda process that zombifies your children instead of letting them go, it’s very annoying and unhealthy.
I’ve been using duckduckgo for years ever since I degoogled but I’m increasingly annoyed by its complete lack of IPv6 connectivity. I use NAT64 and so it works fine but it bothers me to use services that don’t have v6. Does someone have a good non-google IPv6 search engine that’s privacy respecting?
My network is entirely v6, I tolerate NAT64 given the current internet landscape but every service I can cut out that needs NAT64 the closer I can get to disabling NAT64 which is ultimately my goal. Still a long way from that but I’d like to get there. Additionally the NAT adds latency as it resides outside of my normal network path. I’ve also taken up a policy of not using new services that don’t have v6 if at all possible. That was a key factor in deciding what lemmy instance to use. While it might not matter to you it’s something I look at.
This is very interesting. One of the reasons I like nextdns is because of the relatively short addresses. 2a07:a8c0:: and 2a07:a8c1:: but this is even shorter. I always felt like sprint should’ve put a DNS service on 2600:: feels like such a waste not to.
Since I moved my server to ipv6 only federation broke. I’m guessing this server is acessible trough the cloudflare proxy, but the underlying server is unable to connect to mine...
I’ve been contemplating spinning up lemmy in my infra which is also v6 only…good to know about this gotcha…it blows that this community is on an instance that won’t federate over v6 though ://
I’m curious about something so I’m going to throw this thought experiment out here. For some background I run a pure IPv6 network and dove into v6 ignoring any v4 baggage so this is more of a devils advocate question than anything I genuinely believe....
I’m not looking for this type of answer. I’m aware of why v6 was designed with /64 subnets…I’m also aware we don’t need to conserve addresses, both of these reasons are why I prefixed my question with the devils advocate bit. I understand all of this…then I proceed to describe why mac based, or more generally SLAAC, addressing doesn’t matter to me because we have DHCP and DHCP works great, who needs SLAAC? You cannot convince me to use SLAAC, SLAAC is not important to me or my hypothetical use cases.
…also yes I’m showing v4 baggage…because again…devils advocate…this is a thought experiment, not a genuine question, in this I just think that a /64 is dumb…a /96 is much nicer because it’s still plenty big while not being quite so excessive. Keep in mind, IRL I’m a firm believer of /64 everywhere…I don’t carry v4 baggage…hypothetical me from this question does and it’s not going away because 4.3B addresses is still PLENTY when you don’t care about the purity of v6 design.
🤔 does it actually break PD?..that’s actually not an awful reason if it does. Would actually make sense…outside of this post I fall into the /64 everywhere crowd, minus the cases for /127. Your gripe with point 2 is fair…although I haven’t come across any applications that need it…beyond the applications I’ve written that use it…because again IRL I’m in the /64 everywhere crowd. Thanks for the response though
Does it conserve router space? I get what you’re getting at but if I have 10 subnets it doesn’t really matter from a route table perspective if they’re /96 or /64. What matters is subnet aggregation but I’m not sure the size matters?
Yeah but what I’m getting at is that upper router routing /96s shouldn’t be impacted. 10 /96s is basically indestinguisable from 10 /64s in terms of memory consumed. If I’m only using 10 subnets it shouldn’t matter what the size of those subnets are as long as the count stays the same. It’s when you start deagregating blocks into smaller chunks and consuming more of them than you would otherwise that you start eating table space. I can’t think of a situation where someone would consume more /96s than /64s given they’re both basically infinite addresses.
…you know…that’s a really good point. Honestly this whole thought started because I saw someone adamantly defend not wanting to use an entire /64 and being annoyed Android didn’t have DHCP and it got me thinking…if someone genuinely didn’t care about the design goals of v6 are there good reasons to stick to them if DHCP works everywhere. Like I care about the elegance…but not everyone does. I’ve never seen ISPs assign a /128 although I have heard about it. I have seen 1x/64 assignments though which is only marginally better…but if you stop caring about clean /64 subnets then it becomes manageable without having to resort to an NDP proxy.
I personally have mixed feelings on Google’s decision with DHCP. On the one hand I understand the frustration as it’s not their place to dictate your network architecture…on the other hand I think it’s admirable because it might be the one thing keeping that part of the v6 design goals alive when some wish it weren’t.
🤔 I hope you’re wrong but also I doubt you are. Ik a lot of people have been making a fuss about Android and DHCP, I do hope Google will stick to their guns on this. I feel like whether they do or not will have a massive impact on the direction v6 goes with subnet sizes in the future. Mostly in business environments which largely haven’t deployed v6 yet.
Even if that’s the case it doesn’t really change anything. I was more asking from an end user perspective as I’m hoping we never end up at a point where providers start doing this, however even if they do it doesn’t actually change anything in their routing table. Let’s say providers start giving everyone a /80 instead of a larger block, if they have 50 customers, 50 /80s is no worse than 50 /56s. The only time deaggregation is a problem is when the total number of routes increases but that’s not going to be caused by this as the point of the argument is if you don’t use /64s everywhere than almost any sized block becomes big enough for any sized organization. I really don’t understand why some people hate using a /64 everywhere, it’s not wasteful, it’s the design goal but that’s why this post exists to try to understand the technical downsides and unfortunately so far I’m wishing there were more than Android stops working and your network looks uglier.
All ISPs should do PD unless you’ve got some very special setup and they give you something that must be manually configured. Honestly too many ISPs still lack IPv6 and it’s baffling. I have a friend with Verizon FiOS and after years of not having it he finally got it earlier this year I think…only to have it get taken away a little while ago. Like what?
EDIT: I didn’t realize the anger this would bring out of people. It was supposed to be a funny meme based on recent real-life situations I’ve encountered, not an attack on the EU....
It is interesting how we’ve got this replacement that while slow is clearly taking off and yet people are still out there trying to re-engineer IPv4 as a replacement. Does that qualify as Stockholm syndrome?
X is just better! (beehaw.org)
Quite surprised by the negativity towards Java in this thread about Sublinks, a Java-based Lemmy alternative. Is it that bad? (programming.dev)
Link to the thread: programming.dev/post/8969747...
IPAM SMB/Branch/Prosumer
Im interested in thoughts for a scenario where you want to do small-scale multi-site activities, with site-to-site connectivity....
Anyone know of other assigned /16s
TIL that apparently capital one was assigned the entire 2630::/16 block…which is the largest assignment I’ve seen to date. Does anyone know of other absolutely massive allocations…are there even any others this large?
Think of the children (hexbear.net)
Search engine recommendations
I’ve been using duckduckgo for years ever since I degoogled but I’m increasingly annoyed by its complete lack of IPv6 connectivity. I use NAT64 and so it works fine but it bothers me to use services that don’t have v6. Does someone have a good non-google IPv6 search engine that’s privacy respecting?
DNS service with 4-digit IPv6 addresses (2a09:: and 2a11::) (github.com)
The only other example I’m aware of is dns.nic.in with 2409::
Enabling IPv6 support for IPv4-only apps on Linux (blog.apnic.net)
My IPV6 only server is unable to federate properly with lemmy.world
Since I moved my server to ipv6 only federation broke. I’m guessing this server is acessible trough the cloudflare proxy, but the underlying server is unable to connect to mine...
IPv6 subnetting thought experiment
I’m curious about something so I’m going to throw this thought experiment out here. For some background I run a pure IPv6 network and dove into v6 ignoring any v4 baggage so this is more of a devils advocate question than anything I genuinely believe....
Im going to get banned for this (programming.dev)
They tried (programming.dev)
EDIT: I didn’t realize the anger this would bring out of people. It was supposed to be a funny meme based on recent real-life situations I’ve encountered, not an attack on the EU....
Ip v4 internal to ipv6
Wonder if it’s possible to have a internal ipv4 local address range that is natted to ipv6 public address on your router…