"This is the last month of my life." (discuss.tchncs.de)
sauce, relevant highlight
This magazine is from a federated server and may be incomplete. Browse more on the original instance.
sauce, relevant highlight
I am curious how often do you service the linear rails on the 3D-printer:...
Don’t think I’ve seen this before. Don’t even think the author has things for sale from what I can tell. Couldn’t find an obvious option on any of my models to toggle this either....
Total clog with prusament pla in line. Can’t feed anything through even at high heat. Cold pull not possible / filament not making it into hot end to do this....
So I run a repair shop in Altamonte Springs, FL - Got a weird one that searching the internet only turned up 1 other instance of it happening, so I wanted to post some details on the repair in case someone else runs into it or in case Creality doesn’t admit that it’s a thing....
Tiny desk shelves for kiddo. Stl www.printables.com/…/713135-tabletop-shelf-rack
Here is the reverse side:...
I’ve been looking into this material due to the really nice surface finish and clean look (actually purchased some already 😅)...
Short overview of how good the nesting capabilities of various 3D slicer are....
cross-posted from: sh.itjust.works/post/19906943...
As the titles says, I tried to post a 2.2mb image and get a 413 error. Any help?
I have a CR 6 Max and I took apart the extruder and now whenever I put it back there are always problems....
Is it possible for the leftover residue, of tape on a spool to be scraped into the feed? As the filament drags over the edges of the spool?
cross-posted from: slrpnk.net/post/9706069...
At least so far. The first go round had the nozzle crash into the tree support, resulting in a layer shift. The good news is that the print stayed very firmly stuck to the bed....
When printing on my Ender 3 Max Neo (stock except for a PEI bed), the right side of the bed is always printing too close. I manually leveled the bed, and then I run the auto-leveling sequence. I also have it set to run auto-level before every print, and confirmed that it’s enabled using M420 S1 after the G29 in the opening...
Hey 3D printing fellas,...
This might be a useful reference to be aware of for projects, especially for very small designs....
Hi guys, it’s The Clog Guy, thought I’d try to share something other than problems…...
Ok guys, I’m breaking down and posting here to see if anyone has any ideas. I’m greatful for any advice....
Hi guys. Please check my previous post for any background questions, I don’t have it in me to go over everything again....
Hi - Tenlog TLD3-Pro, printing with branx new Overture PLA+, printing an OpenSCAD exported STL sliced with Cura 5.7.1 (most recent as of yesterday)....
As I’m graduating college in a few weeks, I’ll be losing access to my university’s free printers and filament. I’m going to build up a home lab with a couple printers where I can make goofy little mechanical projects as well as some components for my cars and stuff....