Storage for 12g CO2 cartridges by MioXAnder (www.thingiverse.com)
Stores up to 8 12g CO2 cartridge for airsoft. Feel free to post your photos =)
Stores up to 8 12g CO2 cartridge for airsoft. Feel free to post your photos =)
Cable clip for 3M command tabs. Please use M size command tab.
A converter that allows attachment of a 100mm hose to standard in wall extractor fan (160mmx1600m). I use this to allow me to extract heat/fumes from my 3d printer enclosure using my workshops built in extractor fan.
This is a Holder for a Fairphone 4. I designed it to replace a holder I already had in my car that was too small for the fairphone, so there were parts, that I already had installed and reused. (Ball-joint and gooseneck) I included a stub balljoint with a throat od of 5mm that has a 2.5mm bore so you can screw a m3 bolt in...
I added a hole to be able to release the clip after it clicked. No other changes to it. The original part: https://www.thingiverse.com/thing:2594163 The idea for the hole: https://www.thingiverse.com/thing:5364218
English The 3D4U Borehole Cleaning Aid ensures that your hands are free when working with a drill. Mounted on the hand-piece, this accessory automatically secures itself to the wall. For this purpose, the base plate was optimized for the airflow by computer simulation. The nine openings draw in the dust that accumulates around...
Parts designed to use multiple lengths of 1/2 inch Schedule 40 PVC pipe for greater strength and rigidity. . Also may be used with wooden dowels (of appropriate size) if the use of PVC offends your sensibilities.
Cable organizer.
All the things you need when leaving your home ready to go! A Shelf for your wallet and magnetic holders for two sets of keys. The design has compartments for magnets with a diameter of 10mm max. Blender file included.
This design has been updated with AUX port. You can find this new design at: https://www.thingiverse.com/thing:5767765 My PC has USB 3.0 ports only from its back (yes, it is already getting mature). I wanted to bring some of these to my desk to avoid having to 'deep dive' every time I need to connect something reasonably fast...
I wanted to mount my Dremel to a bench, but the original model by Faklam had a ring the Dremel didn't fit though (I later realised that the top can be screwed off). So I cleaned up the model, made the ring bigger, and ended up almost remodelling the whole thing. Unlike the original, the head of the tool is pressed against the...
Deux appareils pour faciliter l'ouverture des bouteilles avec bouchons vissés. pour les fixer sur votre réfrigérateur vous pouvez coller 4 aimants diamètre 6X2mm. Voici un lien pour les aimants. Vous pouvez imprimer séparément les deux fichiers....
Small latch for cabinet, little door, to attach something to other thing. Works well also as printer test. Gap between parts is 0.2 mm. Can be printed fully working on place without supports as shown on video. If you have problems with movement most likely problem is stringing. https://youtu.be/MCwRCMNyMc4
100mm flexi hose holder
This adaptor is to connect 1 1/4in hose to 1 1/4in hose. I've used 2x R-20 o-rings and it seems to seal well or you can use Intex 1.25in Dia Hose Seal.
Similar to a previous design (https://www.thingiverse.com/thing:6088152), but much better ventilated. I'd been wanting to use a Voronoi pattern in a project and discovered an online resource for converting 3d models into printable "Vorinated" bodies (https://www.voronator.com/). The site has its limitations, but it's free and...
Updated20230727 Someone send me feedback that the snap place is too tight and hard to separate, so I modified all 4 models, you can try the new one. Updated: Someone said the angle of the hanger is not good, it might form a bad shade of the clothes, so modified the angle, you can download the"Foldable Hanger_angle" and"Foldable...
I know this is incredibly niche but if you need it, you kinda really need it. xD...
Terms of Use: I spent hundreds of hours designing and iterating these organizers. All I ask in return is to subscribe to my YouTube and to watch the video where I design these bad boys.https://www.youtube.com/channel/UCaqk58gfGcDKyc1l4IGP_vQ?sub_confirmation=1 OR YOU CAN JUST BUY IT: Adapters for any tool combination are for...
I've created this clip from zero because the basic ones I found were too small and my sunglasses fell down every time I was driving. With this one the sunglasses are perfectly placed and stay in place. I am personally using brillenhalter_v2-2_filled of my uploaded versions because it fits the best. The alternative to this one is...
This is a remix from https://www.thingiverse.com/thing:3495751 A re-design of Leecarl's Sim Racing Button Box, modified for use with American Truck Simulator / Euro Truck Simulator. I modified the face plate to utilize the switches/buttons I needed. I also included a blank faceplate template for others to start with. I had to...
For more 2020 hinges as well as other assorted designs A pivot/hinge for 2020 aluminum extrusion. The hinge is made up of three printed parts, none of which should need any supports, brims, etc. I printed mine from PETG on a 0.6mm nozzle and it takes about 1.5 hours for the set.
T-nut for 20x20 or 20x40 V-Slot aluminum extrusion (6 mm gap) compliant with original metal T-nut but adopted for M3 nut. There's also a version that fits to #4-40 x 3/16'' nut:https://www.thingiverse.com/thing:3366563 Fits for most of the printers based on V-Slot, e.g. Creality (CR-10, Ender 3, Ender 5), Tevo (Tarantula,...
My old collector has been giving me issues, so I designed a new one that bolts into a 5 gallon bucket. It’s easy to print, easy to assemble, and works very well. I’ve published it to thingiverse for others to enjoy. There are a few adapters published that include the HFT Bauer mini shop vac (for suction) and 1.75" utility...