3dprinting

tiny desk shelves (files.catbox.moe)

Tiny desk shelves for kiddo. Stl www.printables.com/…/713135-tabletop-shelf-rack

Was trying out a new stitch to attach leather to my 3D Printed part. I love the results (lemmy.world)

Here is the reverse side:...

Is Carbon fiber PLA filament safe to handle? (images2.imgbox.com)

I’ve been looking into this material due to the really nice surface finish and clean look (actually purchased some already 😅)...

Nesting capabilities of slicer (overview)

Short overview of how good the nesting capabilities of various 3D slicer are....

DIY 3dprinted buggy (sh.itjust.works)

cross-posted from: sh.itjust.works/post/19906943...

Can't post an image, I get a 413 error.

As the titles says, I tried to post a 2.2mb image and get a 413 error. Any help?

CR 6 Max extruder issue

I have a CR 6 Max and I took apart the extruder and now whenever I put it back there are always problems....

Tape Residue on a spool

Is it possible for the leftover residue, of tape on a spool to be scraped into the feed? As the filament drags over the edges of the spool?

OP designed and 3D-printed a pellet press funnel for a Dynavap to triple the amount of herb that fits into the chamber! (slrpnk.net)

cross-posted from: slrpnk.net/post/9706069...

I found a way to keep my chamber temps up for long/big ASA prints (lemmy.world)

At least so far. The first go round had the nozzle crash into the tree support, resulting in a layer shift. The good news is that the print stayed very firmly stuck to the bed....

Auto bed leveling on Ender 3 Max Neo

When printing on my Ender 3 Max Neo (stock except for a PEI bed), the right side of the bed is always printing too close. I manually leveled the bed, and then I run the auto-leveling sequence. I also have it set to run auto-level before every print, and confirmed that it’s enabled using M420 S1 after the G29 in the opening...

Automatic Fire Extinguisher for 3D Printer Cabinet (lemm.ee)

Hey 3D printing fellas,...

Robotics/Kinematics - Rolling contact joints - YT upload today from Breaking Taps (files.catbox.moe)

This might be a useful reference to be aware of for projects, especially for very small designs....

My makeshift enclosure filament holder. Very happy with this set-up! (lemmy.world)

Hi guys, it’s The Clog Guy, thought I’d try to share something other than problems…...

Does anyone print planter heads? (sh.itjust.works)

[Troubleshooting] Big stringing problem with flsun SR and Orcaslicer (lemmy.nz)

Ok guys, I’m breaking down and posting here to see if anyone has any ideas. I’m greatful for any advice....

[Troubleshooting] Clog Guy is back, and things have completely ceased making sense.

Hi guys. Please check my previous post for any background questions, I don’t have it in me to go over everything again....

First level printing too tall (lemmy.today)

Hi - Tenlog TLD3-Pro, printing with branx new Overture PLA+, printing an OpenSCAD exported STL sliced with Cura 5.7.1 (most recent as of yesterday)....

What's your go-to "Bang for your Buck" filament brand?

As I’m graduating college in a few weeks, I’ll be losing access to my university’s free printers and filament. I’m going to build up a home lab with a couple printers where I can make goofy little mechanical projects as well as some components for my cars and stuff....