@deFrisselle@lemmy.sdf.org
@deFrisselle@lemmy.sdf.org avatar

deFrisselle

@deFrisselle@lemmy.sdf.org

This profile is from a federated server and may be incomplete. Browse more on the original instance.

deFrisselle,
@deFrisselle@lemmy.sdf.org avatar

Follow the Money for who funds these studies

deFrisselle,
@deFrisselle@lemmy.sdf.org avatar

What happens when the power goes out

deFrisselle,
@deFrisselle@lemmy.sdf.org avatar

So, what happens when high winds or a blizzard takes down the power lines

I lived through the 98’ Ice Storm in the Northeast US Didn’t have power for three weeks

deFrisselle,
@deFrisselle@lemmy.sdf.org avatar

Battery, generator, or some systems work off the fuel pressure

deFrisselle,
@deFrisselle@lemmy.sdf.org avatar

Too bad governments are not promoting Household Solar Systems for a decentralized grid

deFrisselle,
@deFrisselle@lemmy.sdf.org avatar

A heat pump and propane heat seem like a huge waste of money for duplications Plus where do I get the propane after it’s banned

deFrisselle,
@deFrisselle@lemmy.sdf.org avatar

Yes, the later in the season they have less sugar and more tannins Just watch out if you get them very late, like right before they change color, as the excessive tannins will make it syrupy and will trap CO2 bubbles It can lead to exploding bottles or foaming when uncorked

deFrisselle,
@deFrisselle@lemmy.sdf.org avatar

Basically, you pick a bunch of oak leaves Rinse them Boil some water depending on the batch size Put oak leaves in a mesh bag then add to water AKA, make Oak Leaf Tea Add a little bit of ginger plus any other spices you’d like, then add the honey and yeast (after the must has cooled) https://lemmy.sdf.org/pictrs/image/ebec970b-2f42-4223-b45e-49fe070a1796.png

https://lemmy.sdf.org/pictrs/image/6555bd2d-a7a0-47da-9f21-e5257bd0af93.png

https://lemmy.sdf.org/pictrs/image/a9a0a7c1-ecea-49b8-9b29-aba7007f7ae2.png

https://lemmy.sdf.org/pictrs/image/aac96059-ab19-4420-81c9-85b0d5b247a7.png

Amiga Did Ray-Tracing 30 Years Ago, And No One Remembers (lemmy.sdf.org)

Ray-tracing, the simulation of light rays and their interactions with the environment, is the holy grail of computer graphics and can achieve Hollywood-level imagery. The Amiga home computer, despite being capable of ray tracing in the 80s, was left out of the conversation due to hardware limitations. The Amiga played a...

deFrisselle,
@deFrisselle@lemmy.sdf.org avatar

I’m still hunting for a rPi 0 2 W so I can add a PiStorm to my Minimig Maybe later on for my A1200

deFrisselle,
@deFrisselle@lemmy.sdf.org avatar

Nice to have a sizable active community

deFrisselle,
@deFrisselle@lemmy.sdf.org avatar

Did you dry it

deFrisselle,
@deFrisselle@lemmy.sdf.org avatar

That doesn’t mean it was dry from the factory I’ve had spools this year from Polymaker that were fine for the first third then had issues symptomatic of wet filament

deFrisselle,
@deFrisselle@lemmy.sdf.org avatar

Never heard of that one but old printers, if in good condition, work just fine They might not understand some of the newer gcode commands but that’s only a few Nero3D streamed a three-part series where he assembled and use an original Ultimaker from 2013 Barnacules Nerdgasm used a similar Ultimaker to print parts for a Voron 2.4 build Still very capable printers

deFrisselle,
@deFrisselle@lemmy.sdf.org avatar

Solvo SV 06

deFrisselle,
@deFrisselle@lemmy.sdf.org avatar

MS will buy it all at the fire sale for cheap then integrate it deeply into Bing, Windows, etc

deFrisselle,
@deFrisselle@lemmy.sdf.org avatar

Incorrect testing They didn’t use the GPU board the block was designed for as they apparently didn’t have one available from their inventory Linus found out about that at the start of filming the video review then decided to go full steam ahead anyway Gotta get that video out Didn’t even mention or reference the included manual and other documentation Concluded it was a crap product, a prototype installed on the improper GPU, in the video and also on the WANshow That had to have caused untold damage to the company in revenue and reputation

deFrisselle,
@deFrisselle@lemmy.sdf.org avatar

Lemmy.SDF.Org Come on over

deFrisselle,
@deFrisselle@lemmy.sdf.org avatar

Oh, it was far more than that As in the Government should pay for everything down to housing and clothing Odd for someone that runs a company and has to pay employees Maybe it’s that he doesn’t want to pay them but one big payment to the government

deFrisselle,
@deFrisselle@lemmy.sdf.org avatar

That’s its estimated worth according to one potential buyer It’s not their total capital value, revenue, or profit value per year Though they likely have the liquid capital coming into hire a few more while they build out the lab The lab is going to be a money pit for a few years till they hit their ROI The issue is that the rate of growth requires a certain amount of liquid capital to spend that is dependent on pumping out videos across their YT channels They seem to need to slow their roll a bit on that growth

deFrisselle,
@deFrisselle@lemmy.sdf.org avatar

It’s a shame that people don’t understand English Past, Present, and Future tense

deFrisselle,
@deFrisselle@lemmy.sdf.org avatar

I have with Cyser It greatly improved the flavor

  • All
  • Subscribed
  • Moderated
  • Favorites
  • •
  • megavids
  • mdbf
  • ngwrru68w68
  • tester
  • magazineikmin
  • thenastyranch
  • rosin
  • khanakhh
  • InstantRegret
  • Youngstown
  • slotface
  • Durango
  • kavyap
  • DreamBathrooms
  • JUstTest
  • tacticalgear
  • osvaldo12
  • normalnudes
  • cubers
  • cisconetworking
  • everett
  • GTA5RPClips
  • ethstaker
  • Leos
  • provamag3
  • anitta
  • modclub
  • lostlight
  • All magazines
    •