Shdwdrgn

@Shdwdrgn@mander.xyz

A person with way too many hobbies, but I still continue to learn new things.

This profile is from a federated server and may be incomplete. Browse more on the original instance.

Shdwdrgn,

So who do they think they’re going to vote for? Trump has also continually vowed his support of Israel and wouldn’t have done anything different (except maybe sending even more weapons to them), while at the same time not supporting Ukraine at all.

Shdwdrgn,

True enough, but until we get some sort of ranked-choice voting, there’s no chance of a 3rd party candidate being more than a minor blip in the voting numbers.

Shdwdrgn,

I’ve been seeing some complaints about the methodology of this poll, there is one good write-up presented here. Basically what it comes down to is that the New York Times not only cherry-picked from their own data, but they also polled heavily from Conservative voters rather than getting averages based on the demographics of each state.

It makes better headlines than the reality (both candidates are pretty evenly matched in each of the swing states with no clear winner), but this information is pretty much worthless other than hopefully getting more people to vote this year.

Shdwdrgn,

No, my suggestion is to not “waste” your vote on an election where one candidate has already attempted to overthrow democracy but somehow still has a large number of supporters. My county votes somewhere around 85% Dem and the whole state always leans blue so there’s no chance of Trump getting the nomination here, and in 2016 I was willing to vote on a 3rd party candidate to show my displeasure over Trump/Clinton… but in 2020 there was no way I was going to give up even one vote against Trump.

When both parties are equally bad, or when there’s no doubt who will win anyway, then yeah definitely vote 3rd party and make a statement that we’re tired of the same shit. But when the race is this close and one candidate has already stated his plan to do far more damage, then every vote counts and we really need to stick with the candidate who can actually win.

Shdwdrgn,

It’s funny how you’re complaining about all the things “wrong” with this country, and yet you seem to be advocating for the candidate who wants to take away the rights of everyone who isn’t white and obnoxiously rich. Yeah Biden is a fairly typical politician, but what has he done wrong other than Israel? What could he have done better that wasn’t immediately blocked by the republicans? Or are you just mad that he’s trying to move forward instead of sucking the dick of the oil companies?

Seriously, if you think the “left” is the problem here, then you haven’t been paying attention to what’s been happening in the House and Senate over the last couple decades. Check out ever bill that would have improved your life, and who voted against it. Check out who was creating those bills that would improve your life, and who was creating bills that benefited big corporations at your expense. Which party is constantly being caught suppressing voters and sponsoring bills to take away your rights? Which party is saying they want less government influence while trying to pass bills to dictate what every can and can’t do? If you think the Republican party is doing anything at all with your interests in mind then I can only assume you’re a boomer who remembers the party from 70 years ago and hasn’t looked at anything they’ve done since then. Yeah politicians in general suck, but there’s only one party actively working to make your life even worse.

Shdwdrgn,

Funny, that’s what you people said when Russia invaded two years ago.

Shdwdrgn,

I love how you said above that you are giving all these legitimate reasons for hating Biden, and yet the only thing you really said was pro-Israel is bad (no objections there), and somehow pro-renewables are also bad. And yet when I asked what else you think he did wrong or what he could have changed that hadn’t been voted against by the conservative congress, you just completely ignored it.

Maybe the problem here isn’t people like me trying to vote for the least-damaging leader (because face it, it’s either going to be Trump or Biden and nothing you say will change that)… maybe the real problem here is that you’re arguing against what you assume are problems that would go away if Biden wasn’t in office. Show me a good candidate that could actually win the office and I’ll be happy to vote for them. Otherwise the best we can do is voting against the one who is going to hurt the most people.

Shdwdrgn,

Erg that sucks… I’ve seen some posts about Russia’s new offense but haven’t had the chance to look into what’s really happening. Guess I should find some time (not that my knowledge will change anything, of course).

Shdwdrgn,

You want to throw someone in jail without a trial or having their day in court? I mean that’s exactly what Trump has said he would do to everyone trying to prosecute him, but in a fair society you make a case and take it before a judge. And a case this big requires collecting a ton of evidence and making sure you have an air-tight case to convict. How many court cases does he have against him already? Yeah things are moving a lot slower than most people would like, but pretty much any big case like this would also be moving at a snail’s pace. Everybody knows he’s guilty, however if you don’t get everything just right then he gets away on a technicality.

Shdwdrgn,

If you believe that then I have a bridge to sell you. Sometimes we have a chance to vote on something that will improve things, but mostly we’re lucky if the best we can do is vote to keep things from getting any worse.

Shdwdrgn,

Well thanks for at least providing an honest answer since the other guy couldn’t answer a direct question to save his life.

So a few things I’m curious about… how would Biden have changed the SCOTUS ruling on Roe? He can’t just unilaterally overrule them, and any bills for women’s rights that you try to push through congress will get nuked by the conservatives. What’s left?

Regarding the minimum wage… Yes there are still some sectors that are exempted, but Biden did push through an increase to $15/hr that covered a lot of workers. Big surprise, the only ones to challenge this increase were the GOP.

What else can anyone do about COVID? We couldn’t even get people to wear masks at a time when their own family members were dying from it every week. Hell the county next to me defied a state mandate for masking, and then they had the nerve to get mad when someone in my county suggested closing off the hospitals to them since their own hospitals were over capacity. You just can’t fix stupid.

And I didn’t mean to come off as dismissive when I said “other than Israel”… I just meant that yeah this is a big blunder and I have no objection to holding him partially responsible for this. It’s worth noting though that nearly all of Congress is also introducing and voting for bills to provide aid to Israel’s genocide.

Shdwdrgn,

I fail to see where Trump is significantly worse.

Are we talking about the same Trump who set into motion and takes credit for destroying women’s rights to the own bodies, and normalized racism again? Destroying other countries is par for the course with pretty much every other president, but Trump takes the cake in his success at tearing apart his own country.

Shdwdrgn,

I honestly don’t believe that for a minute. You’ve got people who support Israel because that’s what they’ve been taught to do their whole life, and then you have people actually paying attention to what’s been going on and getting called antisemitic for calling out the genocide. Unfortunately the people who are unwilling to change their ways far outnumber the people who care.

Shdwdrgn,

Unfortunately you’re right about racism… It seemed like it might have been getting better at least (although obviously it was still there under the surface), but then mister pussy-grabber made it seem like it was perfectly ok to hang out with the Proud Boys and openly hate anyone who was different. We’re not going to fix racism in a generation or two, but at least we had gotten to the point where it was mostly frowned upon in mixed company to talk that way, which meant the kids weren’t hearing it as often and understood there was a reason for it. Now a generation that could have sparked a real change has just been face-slammed with open hatred from a standing president and we’ve probably been set back a full generation on the subject. A similar argument can be made for LGBT+ where people who thought it was finally safe to be themselves are once again being attacked in public.

I’m not surprised about the DNC pushing Trump as a candidate in 2016, hell nobody believed he could win. As for pushing denialists and others… I’ll have to look into that, it’s not something I have heard about before. I still find that a lot easier to swallow than the GOPs constant tactics of direct voter suppression though

Shdwdrgn,

Heh maybe so, but is it really worth the risk of the damage Trump would do if he were in office again? Judging by your nick, I’m sure you’re aware of all the harm he’s done to the LGBT+ community?

Shdwdrgn,

I want to see a federal bill that states anyone who has sought to remove the rights of others (whether through lawful or political means) shall have their own rights taken away. Enough of these BS claims from politicians that they are merely pursuing the wishes of their constituents, there needs to be severe consequences for trying to trample on other people.

Shdwdrgn,

I have an MFC-9340 and have also run into this problem. The drivers available in cups allow me to either print two-sided in b&w, or print single-sided in color (at least for the drivers that work at all with the printer). I finally broke down and installed the binary from Brother to get it working fully, but it’s annoying that I can’t just use a generic driver with this printer.

Shdwdrgn,

Since it hasn’t been mentioned yet… Yes a failing drive will significantly slow down a computer. Drives are built to be fault-tolerant, so if it reads a block of data and that doesn’t match the block’s checksum, the drive will attempt to re-read the same data until it gets what it believes is correct data, or until it gives up and sends a failure to the computer.

So now imagine your drive is in a state where nearly every block is having trouble being read, so it re-reads each block several times, adding a significant amount of time to every operation. A scan of the drive may indicate everything is working correctly if the drive does eventually return valid information, but the drive itself is having to work very hard to get this data.

One thing you might try to check for internal errors is running a read/write test of the drive, and recording the speed these operations were performed at. If that number is close to the parameters of the drive (you can check with the manufacturer or online reviews to find real-world drive speeds) then the drive is probably ok. However if the test is running a lot slower than the expected speeds, it’s a good bet that your drive is failing and you will want to back up the data as soon as possible.

Shdwdrgn,

Sectors that cannot be read reliably will get marked out, but I’ve seen plenty of HDDs that tested fine but still had obvious issues when reading data from certain areas. If your OS happens to be within that area then it becomes a problem very quickly, and you’ll probably lose data before the drive marks those sectors as bad.

Shdwdrgn,

A lot will depend on your preferred workflow, and since you mentioned SolidWorks I assume that means you prefer a more GUI-oriented approach. However as an alternative, if you are comfortable with more of a programming approach, you might look in to OpenSCAD. Most things are done from a more primitive standpoint in how you create each part of an object, but I like having the direct control over every aspect.

Shdwdrgn,

I played around with it in the early 2000’s to learn more about Linux. Eventually used it to build a micro-release of a firewall running samba, cups, apache, and postfix, all crammed onto a bootable zip-100 disk. You can do quite a lot when you understand the bare minimum requirements to get a system running.

Shdwdrgn, (edited )

I bet Johnson hates it when Biden supports anything he says. Watching him behind Biden during the last SotU address, Johnson looked displeased with everything that was said, even the things that both sides should have been cheering for.

James Webb telescope confirms there is something seriously wrong with our understanding of the universe (www.livescience.com)

Astronomers have used the James Webb and Hubble space telescopes to confirm one of the most troubling conundrums in all of physics — that the universe appears to be expanding at bafflingly different speeds depending on where we look....

Shdwdrgn,

I predict bubbles warping time but not space, thus distorting the apparent speeds of objects we see through them. Star Trek taught me that anything is possible. 😆

And just imagine the new fields of math such a discovery would create…

Shdwdrgn,

Normally yes, but if an exception was found then that too would fundamentally change what we think we know. I doubt it will come down to anything quite that simple, but on the other hand gravity is one of those forces that we still don’t completely understand and when dealing with things on a galactic scale perhaps this new observation will start to crack open that particular mystery. It’s easy to speculate at this point, but really my hope is that this will lead to a better understanding of something huge. I think the most boring outcome of this would be something like “oops we made a mistake in our math.”

Shdwdrgn,

The Intel floating-point math error strikes again.

  • All
  • Subscribed
  • Moderated
  • Favorites
  • •
  • JUstTest
  • cubers
  • magazineikmin
  • InstantRegret
  • thenastyranch
  • Durango
  • Youngstown
  • ngwrru68w68
  • slotface
  • everett
  • rosin
  • osvaldo12
  • kavyap
  • DreamBathrooms
  • megavids
  • mdbf
  • khanakhh
  • cisconetworking
  • GTA5RPClips
  • modclub
  • tacticalgear
  • ethstaker
  • tester
  • normalnudes
  • anitta
  • Leos
  • provamag3
  • lostlight
  • All magazines
    •