bikewrench

The photo was from a site that no longer seems to be up. The pedal on the right, measuring at 15.7mm is the same size that the pedal on my indoor spin bike uses and I want to use standard 9/16 threaded pedals instead....

Fresh wheelset for my single speed and i noticed this out of the box. Should i be worried or is it fine?

I watched a video from Zero Friction Cycling where he tested a bunch of chain checker tools....

Hi all, i have this wear indicator and i am unclear what it exactly measures. I have a 11 speed chain that i am trying to measure and it almost fits. On other wear indicator tools i see they put 0.5 % / 0.75 % / 1 % annotations on it, that would have been helpful here too....

Last month, for the first time in thousands of KM, I got a flat tire....

Just saw this crack in my tire, don’t like the look of it. Is it still fine?

I've been trying to find suitable brake pads for these brakes on my bike; Kool stop and swiss stop have both been recommended as brands, but i can't figure out which actual pads to buy....

I last topped up my front and rear brakes with Shimano's rollerbrake grease after hearing a loud unsightly noise while braking....

I got fed up with just a threaded rod and washers and everything going in crooked, so I designed and 3D printed adapters to use with ZS44/56 and DUB bottom bracket press. The last token works like a centering tool, so everything is going in straight. I added axial bearings, but I don't think they are neccesary. All that and I am...

Shimano doesn't sell the tool to remove the proprietary 4 point jam nut on these brakes, and no one sells the tool. However, if you file out the 2 points between each of four on any typical 12mm box spanner wrench, you can make your own tool and take these apart. If your brake is seized up, the issue is due to the main bolt(s)...