wildbus8979, 21 days ago (edited 21 days ago) You should be good to go. Make sure vfio is loaded in the modules-load.d <span style="color:#323232;">vfio </span><span style="color:#323232;">vfio_iommu_type1 </span><span style="color:#323232;">vfio_pci </span><span style="color:#323232;">vfio_virqfd </span> Make sure the module options are set correctly and the kernel module is blacklisted in /etc/modprobe.d/vfio.conf <span style="color:#323232;">options vfio-pci ids=1000:0097 </span><span style="color:#323232;">blacklist MODULE_NAME </span> Make sure.IOMMU is enabled in your kernel command line (ex via grub): intel_iommu=on iommu=pt This is probably not complete, but it should get you pretty far into allowing you to add the pci device in the hardware config of your vm
You should be good to go. Make sure vfio is loaded in the modules-load.d
<span style="color:#323232;">vfio </span><span style="color:#323232;">vfio_iommu_type1 </span><span style="color:#323232;">vfio_pci </span><span style="color:#323232;">vfio_virqfd </span>
Make sure the module options are set correctly and the kernel module is blacklisted in /etc/modprobe.d/vfio.conf
/etc/modprobe.d/vfio.conf
<span style="color:#323232;">options vfio-pci ids=1000:0097 </span><span style="color:#323232;">blacklist MODULE_NAME </span>
Make sure.IOMMU is enabled in your kernel command line (ex via grub): intel_iommu=on iommu=pt
intel_iommu=on iommu=pt
This is probably not complete, but it should get you pretty far into allowing you to add the pci device in the hardware config of your vm