Same! After mine broke I bounced between Samsung and Garmin before landing in a feñix 6 pro sapphire. Battery life is amazing. Watch faces are configurable and Garmin has an application that allows you to build your own faces if you have the time/inclination. And it’s damn near indestructible. Going on 3 years daily wear and it still looks like it could be new. Check out the black Friday deals.
Hey folks. I was wanting to get a new set of keycaps for my work computer’s keyboard, but I’m having a little trouble finding a set that seems like a good fit. I’m fishing for suggestions here....
I don’t have an offering for the XDA profile that you’re looking for, but a potential alternative. Consider the KAM profile as well.
I used the XDA canvas set on a number of boards for about 5 years and recently switched to the KAM Superuser set on my Dactyl Manuform. The dishes on the top of the keys are very slightly smaller but the height and general profile are very, very similar.
Thekeeblog has a nifty comparison chart that puts XDA and KAM side by side.
My worst for coffee has to be dumping the beans in, flicking the switch, and then watching all the grounds just dump straight on the counter cause I didn’t put the basket back…
Opened a warranty request for a pair of wireless earbuds that started acting up. Despite having seen reports from other users with the same issue successfully getting replacements I just couldn’t do it. Today I finally did the thing.
That was one of my fears as well. Thankfully, the issue is so wide spread that they are replacing them outright even after the warranty has elapsed. Sony WF-1000XM4 has an issue where one of the buds drains 5 times faster than the left. Started with firmware 1.4 or 1.4.2.
I mentioned the difference in battery usage and heat when charging. The date of purchase and model may make a difference though. Bought mine at the end of 2021. This is a good article to get some info going into it. I did the online chat with Sony. Good luck!
Can’t beat a model M. First time used one was at work. GE used to deploy a variant of the Model M with their Cariolab and Maclab workstations. Had its own custom key cap set specifically for their application functions. So satisfying to type on.
So i still have depression and im constantly bored, i feel like a loser who cant do anything right. I want to let my creativeness out, make something i can share with the world or family, but im probably dreaming too big. I cant stand being depressed and bored, it stinks, everyone tells me to work out but i lack the motivation...
Have you considered the adhdonline.com route? I was pointed that direction to get a on assessment as it was faster and less expensive. Assessments could have taken 3+ months and cost several thousand dollars. The online assessment cost $180 and I completed it in a few hours on a Friday afternoon. I had a diagnosis of ADHD (other) by midday the following Tuesday. I started on medication that Thursday.
So my process was a bit out of order, but yes I was billed for a consultation as well as the assessment. I think after insurance my scenario was similar to yours. The Psychiatrist who I saw prior to my assessment (PCP referred me one step too far) suggested the online route as it would take 3 to 6 months to be assessed through conventional channels. I was also told it could cost as much as $3000 to $4000 for the assessment alone.
I figured that I didn’t have much to lose. With the Psychiatrist themselves telling me that the diagnosis given through the online service was an actionable diagnosis, then why not give it a try. Seems that the site employs a team or teams of credentialed and certified psychiatrists to report on the questionnaires.
Seems that the change in accepting a diagnosis from ADHDonline.com is a new thing as of this year or last.
Hi everybody? I live in Norway and I find it really difficult to buy color changing silica gel balls here. I want to use it to keep and control better my filament rolls while they are stored and also to the AMS on my Bambu X1C. The only alternative I found is on Aliexpress, just a 500gr bottle. I was wondering if anybody else...
I’m paying for the low deductible insurance at my company (higher cost, supposed to be better benefits). I made an appointment for diagnostic assessment at the beginning of the year, their next available appointment was SEPTEMBER 30. They called me yesterday with the estimated cost to me after insurance (I mean nice that they...
I had a similar experience. The Psychiatric NP that my PCP referred me to told me that id skipped a step, but that there was an easy fix. She then told me about adhdonline. Questionnaire took a few hours, but I got a result on Tuesday after finishing it on a Friday evening. Charge was $180.
Replied to someone else, but wanted to make sure you saw the info. The Psych NP that I saw told me to use adhdonline.com. The questionnaire took a few hours. Result took about 2 business days. Cost was $180. I started on concerta the next day.
May not be pretty, but it’s working really well. Bottom to top: plastic screw, nut to tension it against the plate, standoff into the brass heatset inserts....
I may need to rethread the right side. Not surprised by the flex though, was kind of planning on it with the rotation and tilt.
I tried the original dactyl manuform and then found this one (Carbonfette). It’s a huge improvement for me. Splay on my hand is narrower and more comfortable.
What kind of wearable device do you want? Assuming it will work and feel like you imagine it would
It’s getting cold and so I’m fumbling with my phone and other devices....
Stringing = too cold? (lemmy.world)
Printing here with eSun PLA at 215 C on a Prusa Mini, and there are lots of hairline strings....
Keycaps
Hey folks. I was wanting to get a new set of keycaps for my work computer’s keyboard, but I’m having a little trouble finding a set that seems like a good fit. I’m fishing for suggestions here....
Ortholinear mechanical keyboards
Looking for some purchasing advice....
When it's midnight and you just need to get the moccamaster ready for the morning before bed... but then the ADHD rears its ugly head (sh.itjust.works)
The pic may not be nsfw … but the words uttered at the time certainly were!
Feature Request: Left Handed Mode
As the title says, along with ~10% of people I’m a lefty. Is it possible to reverse the layout of my feed?...
Did something today I had been putting off for 6 months
Opened a warranty request for a pair of wireless earbuds that started acting up. Despite having seen reports from other users with the same issue successfully getting replacements I just couldn’t do it. Today I finally did the thing.
deleted_by_author
Keycap suggestion (lemmy.world)
I’ve always had black or grey keyboards, but decided to change it up with this sky blue zoom tkl....
What is a good hobby for a depressed person?
So i still have depression and im constantly bored, i feel like a loser who cant do anything right. I want to let my creativeness out, make something i can share with the world or family, but im probably dreaming too big. I cant stand being depressed and bored, it stinks, everyone tells me to work out but i lack the motivation...
Met with a psychiatrist for ADHD diagnosis
I just had my first ever meeting with a psychiatrist to get diagnosed with ADHD....
Where do you get silica gel?
Hi everybody? I live in Norway and I find it really difficult to buy color changing silica gel balls here. I want to use it to keep and control better my filament rolls while they are stored and also to the AMS on my Bambu X1C. The only alternative I found is on Aliexpress, just a 500gr bottle. I was wondering if anybody else...
Feature Request
Two things came to mind while adding accounts and getting a feel for the app (which is great so far btw)....
Got my insurance quote for my diagnostic assessment
I’m paying for the low deductible insurance at my company (higher cost, supposed to be better benefits). I made an appointment for diagnostic assessment at the beginning of the year, their next available appointment was SEPTEMBER 30. They called me yesterday with the estimated cost to me after insurance (I mean nice that they...
3D printers are down. Needed more tenting out of my Dactyl. Solution: Plastic M3 standoff kit. (lemmy.world)
May not be pretty, but it’s working really well. Bottom to top: plastic screw, nut to tension it against the plate, standoff into the brass heatset inserts....