@yrabbit@mastodon.sdf.org
@yrabbit@mastodon.sdf.org avatar

yrabbit

@yrabbit@mastodon.sdf.org

Enthusiastic programmer. Love CRPGs, black currant, summer and blinking LEDs. Villager. Planted an oak tree. #dragonflybsd desktop

Support my work: TRC20 TDe8PUytCs9pQJazkc55DmBCv5aMnbPisN

I have an incomprehensible weakness for tiny displays and have been doing #FPGA on lower decks lately.

Sometimes I do #electronics and print things on my 3D printer (#3dprinting #diy)

!Extremely dumb persons, Nazis and Russophobes will be blocked without notice!

This profile is from a federated server and may be incomplete. Browse more on the original instance.

yrabbit, to random
@yrabbit@mastodon.sdf.org avatar

I've never seen such a retract tower on a PET-G on a bowden! I became a fan of direct drive. 😀

top= 0.1mm bottom=1.5mm

yrabbit,
@yrabbit@mastodon.sdf.org avatar

@Triffen
Yeah, there is a small amount of ghosting, but Aquila was not designed for such a heavy head and I can accept it because now you can print something like this out of PET-G and it will not be clogged inside with crap that cannot be cleaned🙂 :)

https://www.printables.com/model/76999-snap-in-fan-shroud-for-prusa-i3-mk3s

P.S. This is an example, I can't imagine who would want to ruin a >$1000 Prusa with such a thing 😜

yrabbit, to random
@yrabbit@mastodon.sdf.org avatar

I found a fresh Marlin for the Aquila printer, it's flashed and apparently works - that's good news.

However, turning on Linear Advance still makes the stepper motors squeak like an unlubricated cart, which is bad news.

https://github.com/mriscoc/Special_Configurations/releases/tag/Aquila

yrabbit,
@yrabbit@mastodon.sdf.org avatar

@Triffen

Hmm, I think maybe I'm spoiled by quiet stepper motors in "normal" mode, but two years ago when I first tried the LA I was horrified.

And I wasn't alone, by the way

https://www.reddit.com/r/3Dprinting/comments/iyqhr3/linear_advance_causes_extruder_to_sound_like_a/

https://www.reddit.com/r/3Dprinting/comments/k8js8g/now_i_remember_the_reason_why_i_didnt_use_linear/

https://www.reddit.com/r/3Dprinting/comments/l9tkf2/tmc2209_linear_advance_marlin_does_it_still_makes/

I thought it was fixed in the latest version, but no🙂

yrabbit,
@yrabbit@mastodon.sdf.org avatar

@Triffen Well the stepper motors are exactly the same, but as for drivers I'm not sure - it is necessary to disassemble the printer and tear off the heat sink from the chip.

  • All
  • Subscribed
  • Moderated
  • Favorites
  • •
  • megavids
  • modclub
  • DreamBathrooms
  • mdbf
  • magazineikmin
  • InstantRegret
  • Durango
  • Youngstown
  • slotface
  • thenastyranch
  • love
  • kavyap
  • GTA5RPClips
  • normalnudes
  • tester
  • khanakhh
  • ngwrru68w68
  • everett
  • osvaldo12
  • rosin
  • ethstaker
  • Leos
  • anitta
  • cubers
  • tacticalgear
  • cisconetworking
  • provamag3
  • JUstTest
  • All magazines
    •