3DPrinting Hot

STL printables.com/…/866603-carboy-dryer-stackable...

Today we’re ecstatic to publish our first demo showing a homemade BusKill Cable (in the prototype 3D-printed case) triggering a lockscreen....

I have recently obtained a friend’s old Formlabs Form 2 SLA printer. I I am an absolute beginner to printing, but I am pretty excited to get into it....

My SUNLU S1 Plus filament dryer was slipping around getting yanked forward on my TUKKARI TLX MK4 enclosure, so I designed this mount which fits into the existing slots on top of the enclosure. Prints in two pieces that screw together since otherwise the supports would be complicated. Had to print the larger piece on my big bed...

Any suggestions before trying again after a reset? This is my first go round changing nozzle diameter. I went from a 0.4 mm nozzle to a 0.6 mm nozzle....

Our youngest broke his big brother’s bumblebee. Three iterations later, everything fits pretty well and the older one is happy to have bumblebee back....

Hello all. I am very new to this but it is all very cool to me. I ran into a problem and I am not sure how to troubleshoot it. I downloaded a simple pull string helicopter off thingiverse. After running through the slicer software, the estimated build time is 131 hours. Relative to it’s size this seems insane. If I “run the...

cross-posted from: sh.itjust.works/post/18848847...

I’ve made a large number of custom prints, and all of them were created using TinkerCad. It’s an amazing toolkit, stupid easy to use but versatile. That is … until something needs a tiny adjustment somewhere. That’s when I feel it would’ve been neat to use parametric CAD instead....

It’s 1.75mm filament going into 2mm layers. lol, wtf. Still looks great, though.

I think 1kg spools are too much, I want to experiment with ALL THE COLORS… But few manufacturers offer 250g, and they are sometimes twice the cost by weight. https://feddit.it/pictrs/image/2658590c-535c-4523-9dd2-25663ba7bc23.webp

cross-posted from: lemmy.sdf.org/post/16042365...

OK guys, I finally found what the issue is, or at least kind of where it’s coming from....

In keeping with my usual tradition of harping on about the dumb shit I design and slap up on Printables:...

I finally got a filament drying box and I’m using it prior to and during prints. It seems to be helping. I’m a bit of a color queen, so I keep a pretty big backlog of different filaments. I’ve been storing them in vacuum bags but the vacuum bags often seem to lose some of their vacuum after a few months; the whole process...

I know it’s not a new problem, but I don’t know what I can or should do…...

Hey, my printer recently stopped working saying the filament ran out even though it was still in for use. I checked the sensor and sure enough it was worn down, so I replaced it. But now I’m getting the same message even though I just replaced the sensor and all the wires are connected back to the sensor and printer. If it...

I’ve had access to a roommate’s 3D printer, but they’ll be moving away soon :(...

After half a dozen iterations, this was the first reasonably working, acceptable feeling, and good-sounding ratchet mechanism....

Does anyone have any tips or tools to help with managing slicer profiles using inheritance? I primarily use SuperSlicer but have been dabbling with Orca Slicer recently....

First I’d like to say thanks to everyone for looking at these posts and trying to help, and sorry to anyone who may be annoyed. Trust me, I’m not happy either....