Knob replacement for strap, Eibos Easdry filament dryer (print) (files.catbox.moe)
cross-posted from: lemm.ee/post/29553039...
cross-posted from: lemm.ee/post/29553039...
I remixed a case for the Philips hue dimmer (v1) ZigBee switch to be used as physical buttons for my homeassistant automations.
This is a custom wall mount for my 2nd screen Dell P2417H (simmilar models with same stand will fit as well). It’s a 24" monitor with pivot stand (can adjust up/down, portrait/landscape and tilt), but it doesnt suppport vesa mount (edit: this is wrong, it does support vesa, but then cant use pivot mechanism). I wanted it on...
The other reason is because I got the Kobo Clara 2e to make a e-reader case for it, which I did. And now I don’t need it any more, but I’d like a stand in for it just in case, I need to test fit and finish....
cross-posted from: lemm.ee/post/29388765...
First time I printed something made in FreeCAD. It’s a table lamp for our balcony, more like a mood light than a real lamp hehe. Its made from 3 parts (base, tube and a hat). Base and tube are CA glued and I used some insulating tape to fit a hat tightly. The lamp is about 240 mm tall and its powered from 9V battery. Battery...
Guide to use RTMP cameras, OBS and Youtube to make a nice 3d Printer Monitor
First time I printed something made in FreeCAD. It’s a table lamp for our balcony, more like a mood light than a real lamp hehe. Its made from 3 parts (base, tube and a hat). Base and tube are CA glued and I used some insulating tape to fit a hat tightly. The lamp is about 240 mm tall and its powered from 9V battery. Battery...
When I do an overhang test, I always have this problem at about 35°. Does anyone have a suggestion what could be causing it?...
This looks right in my price range for my next upgrade. I want a core xy, I’ve been on bed slingers, so this looks good....
Contemplating getting a K1 or K1C in the nearish future as it looks to be the most cost-effective core-XY platform that allows open-source firmware. All I’ve found are compensated reviews so far so, figured I’d see if anyone on Lemmy has a less biased experience....
Can someone explain or point me towards a good tutorial that explains how to match complex curves, like the PS5 side panels?...
Pardon the brim remnants. Not pictured: the many prior iterations. This started as a head on photo that I imported into fusion 360 and scaled after some measuring with calipers. It’s not perfect, but it’s rapidly approaching good enough. The square indent is to help with orientation - although the part obviously is not...
Building a 3D printer is easy. Getting the details right to build a great 3D printer is hard, as this is where most companies fail. Why?...
cross-posted from: lemm.ee/post/28863694...
https://lemmy.sdf.org/pictrs/image/d491c452-61f3-4256-b529-8d4ead72575e.png...
On the bottom of my prints, there’s an area of underextrusion and I can’t figure out what’s causing it....
I just sent this email over to elegoo official, so either way I’ll update this post with their response for a community reference point:...