3DPrinting - kbin.social

tiny desk shelves (files.catbox.moe)

Tiny desk shelves for kiddo. Stl www.printables.com/…/713135-tabletop-shelf-rack

Was trying out a new stitch to attach leather to my 3D Printed part. I love the results (lemmy.world)

Here is the reverse side:...

Is Carbon fiber PLA filament safe to handle? (images2.imgbox.com)

I’ve been looking into this material due to the really nice surface finish and clean look (actually purchased some already 😅)...

Nesting capabilities of slicer (overview)

Short overview of how good the nesting capabilities of various 3D slicer are....

DIY 3dprinted buggy (sh.itjust.works)

cross-posted from: sh.itjust.works/post/19906943...

Can't post an image, I get a 413 error.

As the titles says, I tried to post a 2.2mb image and get a 413 error. Any help?

CR 6 Max extruder issue

I have a CR 6 Max and I took apart the extruder and now whenever I put it back there are always problems....

Tape Residue on a spool

Is it possible for the leftover residue, of tape on a spool to be scraped into the feed? As the filament drags over the edges of the spool?

prompted by poopbag holder (lemmy.world)

Just a simple 2 part print to protect the bag when out and about. Snap fit top

OP designed and 3D-printed a pellet press funnel for a Dynavap to triple the amount of herb that fits into the chamber! (slrpnk.net)

cross-posted from: slrpnk.net/post/9706069...

I found a way to keep my chamber temps up for long/big ASA prints (lemmy.world)

At least so far. The first go round had the nozzle crash into the tree support, resulting in a layer shift. The good news is that the print stayed very firmly stuck to the bed....

Auto bed leveling on Ender 3 Max Neo

When printing on my Ender 3 Max Neo (stock except for a PEI bed), the right side of the bed is always printing too close. I manually leveled the bed, and then I run the auto-leveling sequence. I also have it set to run auto-level before every print, and confirmed that it’s enabled using M420 S1 after the G29 in the opening...

I made a 2-in-1 weed pellet press with funnel for my dry herb vaporizer. (www.printables.com)

printables.com/…/885862-pellet-press-funnel-for-d…...

Automatic Fire Extinguisher for 3D Printer Cabinet (lemm.ee)

Hey 3D printing fellas,...

Robotics/Kinematics - Rolling contact joints - YT upload today from Breaking Taps (files.catbox.moe)

This might be a useful reference to be aware of for projects, especially for very small designs....

My makeshift enclosure filament holder. Very happy with this set-up! (lemmy.world)

Hi guys, it’s The Clog Guy, thought I’d try to share something other than problems…...

Does anyone print planter heads? (sh.itjust.works)

[Troubleshooting] Big stringing problem with flsun SR and Orcaslicer (lemmy.nz)

Ok guys, I’m breaking down and posting here to see if anyone has any ideas. I’m greatful for any advice....

[Troubleshooting] Clog Guy is back, and things have completely ceased making sense.

Hi guys. Please check my previous post for any background questions, I don’t have it in me to go over everything again....

First level printing too tall (lemmy.today)

Hi - Tenlog TLD3-Pro, printing with branx new Overture PLA+, printing an OpenSCAD exported STL sliced with Cura 5.7.1 (most recent as of yesterday)....

What's your go-to "Bang for your Buck" filament brand?

As I’m graduating college in a few weeks, I’ll be losing access to my university’s free printers and filament. I’m going to build up a home lab with a couple printers where I can make goofy little mechanical projects as well as some components for my cars and stuff....

3DPrinting Hot