jkmcnk

juremes, 1 day ago to random Slovenian

Morda bi bilo dobro, da slovenski strankarsko-verski tisk nabavi nove stock fotke.

18+ po3mah, 1 day ago to random

S katero stranko se ujemaš?
Nekatera vprašanja so sicer dvoumna, ampak bolje išta..

https://izvoli.eu/sl/

po3mah, 2 days ago (edited 2 days ago) to linux

I'm planning to remove Windows from the rest of my machines soon.
There is a small (big) obstacle though and I'd like to hear your experience.
I'm using #GoogleDrive for the majority of my and the team's workflow. I'm mostly concerned about the sync functionality.
Which #Linux client offers the best, most stable and most similar sync experience to the official Win app?
The second issue is Office365 (offline apps). Can it run reliably in #Wine yet?
(contd...)

nixCraft, 5 days ago to random

Is "fixed stuff" a good git commit message for a big project? I'm asking for myself 🤔

po3mah, 6 days ago to random

I impulsively made a reservation for an 8-day trekking trip.
Now I can work again with ease.

juremes, 7 days ago to random Slovenian

Tisto, ko ti postane jasno, da si zajebal, pa bi se vseeno rad našlepal na vlak "prvi iz skupine".

https://www.gov.si/novice/2024-05-22-izjava-predsednika-vlade-po-napovedi-voditeljev-spanije-irske-in-norveske-o-priznanju-palestine/

po3mah, 7 days ago to random

Včasih sem rad prebral Mazzinijeve članke. Zadnji, viteško-braniteljski pa se mi je malo zataknil.
Nekoč sem bil v podobni situaciji (urednikovanje delu, ki je bilo osumljeno plagiarizma), pa mi na kraj pameti ni padlo, da bi napadel celoten hudobni svet, krivdo avtorja pa zmanjšal na minimum.

https://siol.net/mnenja/kolumne/miha-mazzini-anatomija-nekega-linca-634348

tomi, 9 days ago to homeassistant

Link to the original blog post with a nice text/pictures layout.

The problem:

• kids keep forgetting to carry the key to unlock the front door. They never forget to carry their phones though.

The solution:

• unlocking the front door using a mobile phone

HW parts:

• front door with magnetic solenoid relay
• ESP32 board with a single relay (SZHJV)
• USB2TTL adapter
• 24V power supply (Meanwell MW HDR 30-24)
• 5V power supply (didn’t need it)
• 6A circuit breaker (Doepke)
• some wires
• NFC sticker (special type for sticking it to the metallic surfaces)
• Aqara Door/window zigbee sensor

SW:

• #HomeAssistant (server)
• Home Assistant Companion App
• #ESP32Home

The process:

1. I installed a wall box near the front door, under a nearby electrical socket (see below)
2. When the company installed the front door, I asked them to install a UTP cable from the door lock mechanism to the socket.
3. Bought the materials above (Aliexpress for the boards, Conrad for the power suppy).
4. Connected the mains to the breaker (for emergency switch-off)
5. Connected the cables from the breaker to the 24V power supply
6. Connected the cables from the power supply to the ESP32 board, door solenoid relay and ESP32’s relay. Luckily, I didn’t need to install 5V power supply for the ESP board, because it also works with 24V.

Here’s the doodle of the connecting scheme:

doodle of the electrical schemeHere’s the original connecting scheme from Innotherm (door manufacturer), in Slovenian: It was useful because it reveals which power supply is appropriate (Meanwell MW HDR 30-24).

the electrical scheme for wiring the door unlocking mechanism7. Fitted everything in the wall box. It was too shallow! I couldn’t hide all the junk with the flat cover that came with a box.

Before fitting:

circuit breaker, power suppy and esp32 board hanging out of the wall boxEverything nicely fit in a box:

circuit breaker, power suppy and esp32 board nicely ft in the the wall box8. I designed and 3D printed a new cover in TinkerCad:

3d model of the wall box cover10. After a 3rd try (of 3D design and printing), all measures were finally correct and I could cover the box (Mastodon post):

wall box cover mounted11. Flashed ESP32 board with ESPHome*, added it to Home Assistant.

(*Actually it wasn’t that simple. The board doesn’t have a data USB connector. I had to buy USB2TTL adapter. I was bitching about it here.)

esp32 board with usb2ttl adapter connectedNevertheless, after the firmware update, I edited .yaml for the board so it exposes:

Main entity:

• Switch (for controlling relay), connected to GPIO16

Misc. entities:

• LED light (connected to GPIO 23, to signal when the door is opened)
• Wifi sensor (for checking the power of Wifi signal, because the esp board is located in a wall box)
• Uptime (to see the time since the last esp board reset)
• Restart switch (to remotely restart the board if needed – but until now it wasn’t needed)

.yaml code for ESPHome (gathered from various websites, mainly from ESPHome):

... skipping the first part, wifi connectivity, substitutions etc.light:  - platform: status_led    name: "ESP32-rele01-vrata Led"    restore_mode: ALWAYS_OFF    pin:      number: GPIO23      inverted: Falseswitch:  - platform: gpio    pin: GPIO16    name: "Door lock switch"    inverted: False  # The following can be omitted  - platform: restart    name: ${devicename} restartsensor:  - platform: wifi_signal    name: ${devicename} wifi signal    update_interval: 600s  # human readable uptime sensor output to the text sensor above  - platform: uptime    name: ${devicename} Uptime in Days    id: uptime_sensor_days    update_interval: 60s    on_raw_value:      then:        - text_sensor.template.publish:            id: uptime_human            state: !lambda |-              int seconds = round(id(uptime_sensor_days).raw_state);              int days = seconds / (24 * 3600);              seconds = seconds % (24 * 3600);              int hours = seconds / 3600;              seconds = seconds % 3600;              int minutes = seconds /  60;              seconds = seconds % 60;              return (                (days ? String(days) + "d " : "") +                (hours ? String(hours) + "h " : "") +                (minutes ? String(minutes) + "m " : "") +                (String(seconds) + "s")              ).c_str();time:  - platform: homeassistant    id: homeassistant_time# Text sensors with general information.text_sensor:  # Expose ESPHome version as sensor.  - platform: version    name: $devicename Version  # Expose WiFi information as sensors.  - platform: wifi_info    ip_address:      name: $devicename IP    bssid:      name: $devicename BSSID  # human readable update text sensor from sensor:uptime  - platform: template    name: Uptime Human Readable    id: uptime_human    icon: mdi:clock-start    

12. I’ve put an NFC sticker on the door.

13. Wrote 2 simple automations that open a relay when the phone touches the NFC sticker and closes it after 1 second:

screenshot of the door unlock automation2nd automation switches the relay off after 1 second (also blinks the red status led on the ESP board):

screenshot of the door lock automation14. Added Aqara Door sensor to the door and connected it my existing Zigbee network using Zigbee2MQTT. It’s for logging when the door is open and for turning on the red status LED on the ESP32 board when the door is opened.

aqara door sensor mounted at the edge of the door15. Added a new control dashboard in Home Assistant for tracking what’s going on with the door:

dashboard in home assistant with various door statusesConclusion

After 6 months, it works great. Kids are satisfied and me too, because this is one of the first usable HomeAssistant projects that involve some electronics and physical devices. It works in 99% of cases.

There are some issues with it though:

• The ESP32 board sometimes reboots after unlocking. It seems that the door solenoid relay draws too much current and the voltage from the power supply drops momentarily. Probably I need to add a capacitor to the board power input to smooth the voltage. This is not a big issue, because the board starts working normally after 3 or 4 seconds after the reboot.
• Once or twice it happened the esp board relay got stuck in an OFF state. I had to hit it gently with a screwdriver to unstuck it. After that, I reduced the time the door solenoid is opened from 2 to 1 sec. Not sure if it will help. Maybe it’s just a bad relay.
• Several times the wifi was down and the board couldn’t communicate with the Home Assistant. It looks like my telco provider’s router is not the best one and it freezes sometimes. Probably I need to buy a better wifi router.

TODO

I have several ideas on how to upgrade the unlocking mechanism:

• unlocking with a fingerprint
• unlocking with facial recognition

Disclaimer

The links to the products are not affiliate links and I don’t receive any compensation for linking.

The code and the ideas are mostly from HomeAssistant and ESPHome community forums.

https://blog.rozman.info/unlocking-the-front-door-using-the-mobile-phone-and-home-assistant/

doodle of the electrical scheme
the electrical scheme for wiring the door unlocking mechanism

jkmcnk, 12 days ago to random

what a time to be alive. 😜 https://www.tomazgorec.si/knjiga/

po3mah, 12 days ago to random

Nobody prepared me (or talked about) the phase of life when everything changes.
I'm approaching my 50s and I feel the biggest changes since puberty. Mental more than physical.
Less and less things are relevant.
People are tiring.
Hobbies are everything. I could garden all the time.
I don't care if I live 1 or 30 years more. Both is fine.
Books are everything. People who read can approach me, others can fuckoff.
Visits? No thanks, I have more important things to do. Like - nothing.

ai6yr, 13 days ago to random

Grocery shopping tip: wild mustard flowers (which are an invasive weed) taste IDENTICAL to fancy, expensive broccollini when cooked, and are free. #broccolini

ai6yr, 15 days ago to random

Seeking eggplant recipe ideas, as I have one limp eggplant in the fridge and 8 eggplants growing in hydroponics (which may produce a massive amount of eggplant).

So far my repertoire includes 2 dishes:

1. Eggplant Parmesan (Italian)
2. Eggplant in Garlic Sauce (Chinese)

(the family hates eggplant, except me, so we never eat it 🤔 )

#eggplant

jkmcnk, 1 month ago to random

the world is held together by duct tape and bash scripting.