The problem is I don’t even know what happened or how the pla got around that silicon sleeve. Part of me just wants to say forget it and continue to print with it like this but I feel like this is just a fire waiting to happen.
Thank you for the advice! I think I’m gonna run with it and put the printer in the closet for a bit.
No worries! Thats exactly where it is. The burned on stuff goes all the way down the side and around the back.
I’m afraid this bing need to be totally taken apart but i haven’t done much more than investigate and pull at some easy pieces so far.
Keep in mind this is my first printer and I’m new to the hobby so I’m at the why isn’t this working and why did I do this to myself stage. This might not be a problem for more experienced people. Thankfully this community exists because I’d be lost otherwise
Hey 3dprinting! I want to buy a 3d printer for my little sister for Christmas. She’s big into cosplay and engineering. I expect her to make props/and little container for things. Nothing crazy. I was looking at the ender 3 models but was unsure if that was the right pick. Just wanted to know if you had any advice. Budget is...
Is there any reason that little silver part of the extruder wouldn’t move and start clicking while printing when printing at 205 in PLA. It seems to turn just fine without any filament in there otherwise....
It looks like I can’t extrude in the air either. Maybe I didn’t get all the gunk out of the nozzle the first time I’m just clueless on how to. I tried soaking it and acetone and digging stuff out and that didn’t seem to do it and the only pen I have doesn’t go through the hole in the nozzle. It’s too thick. It’s sitting at about 240 right now so I’m hoping That it just melts I guess.
At this point, I’m wondering if it’s not just worth buying a new nozzle and calling it a day
Minnesotan here, while in some areas we’re doing well, our infrastructure isn’t great. Its gotten better after the bridge incident at least.
Compared to other states I’ve lived in (California, Illinois, Alabama, Arizona, Iowa), Minnesota is probably the best. That being said, please don’t move here. Housing is already too expensive and you wont like the cold.
Horse. A friend of mine brought some from Iceland and was kind enough to share. Its somewhere between pork and beef to me.
The fermented shark he brought back on the other hand, was the worst thing I have ever tasted. The smell alone cleared the room, and as one chef instructor said, “it smells like dirty pussy”.
I have never 3d printed anything before. These days I’m working on a small home automation project, and I will require some enclosures. So I thought why not buy a 3d printer ? That way I can also learn about 3d printing when I get some time....
Decide if you want to print or tinker with your printer first. I personally don’t like the tinkering portion and learned that after it was too late. Don’t be afraid to save what you’ve got now and buy the right printer not the one that is easily picked up right now
I am happy with the result. There is a black line accross the badge due to the head going through it, but I removed it by sanding it. Maybe I should play with the z-hop setting.
How? (lemmy.world)
Does this hobby ever get easier or is it always like getting kicked in the nuts by Ronaldo?...
Christmas buying advice?
Hey 3dprinting! I want to buy a 3d printer for my little sister for Christmas. She’s big into cosplay and engineering. I expect her to make props/and little container for things. Nothing crazy. I was looking at the ender 3 models but was unsure if that was the right pick. Just wanted to know if you had any advice. Budget is...
[SOLVED] Extruder clicking (lemmy.world)
Is there any reason that little silver part of the extruder wouldn’t move and start clicking while printing when printing at 205 in PLA. It seems to turn just fine without any filament in there otherwise....
deleted_by_author
What is the most exotic meat you've eaten? How was your experience?
Any advise for someone wanting to start 3d printing ?
I have never 3d printed anything before. These days I’m working on a small home automation project, and I will require some enclosures. So I thought why not buy a 3d printer ? That way I can also learn about 3d printing when I get some time....
Where Obi Wan threatens R2 to keep his dirty droid mouth shut about everything he saw the past fourty years: war crimes, births and deaths, betrayals, sand, His New Empire? (dmv.social)
Poor R4…
Fallout 1 tips
I recently picked up a PC and decided to give the original fallout game a try. Do you guys have any tips or tricks I should know before I get started?
My first mid-print filament change ! (i.imgur.com)
I am happy with the result. There is a black line accross the badge due to the head going through it, but I removed it by sanding it. Maybe I should play with the z-hop setting.