I am looking to buy a 3D printer which will be used in my small business size of about 20 people. We sometimes need little parts made for holding littles pieces of equipment and after seeing a similar lab to us use 3D Printing to make little holders for their antennas, we are looking at buying one ourselves....
So… I just bought a p1p and it’s just about the best decision I could have made when it came to this hobby. The thing just freaking works, and it works well. I don’t think I have a single complaint about mine.
That being said, they just released a p1s model. This is basically the p1p but enclosed so you can print more difficult materials like ABS. It also allows you to buy a combo with the AMS system that will let you print 4 colors at once for much cheaper than if you bought them both separately.
I really wanted to go with the open source prusa printer, but honestly at the price point I just could not justify it. The p1p is just as fast if not faster. Just as reliable. And actually shipped fully featured, for cheaper than even a mk3s+ kit. It’s really the no brainer option at that price point if you can get over it being closed source.
Not sure what you mean by the material available. Are you saying the material available that you’ll be able to print?
If so, I can expand on this a bit. You can print PLA, PETG, and TPU absolutely flawlessly on the p1p. Far better than I was ever able to do on any of my previous printers. And unless you are going to be making parts that are going to see exposure to a lot of heat or pressure, that really should cover most of your bases.
To print stuff like ABS, ASA, or PC you’ll really want an enclosure, and that goes for just about any 3D printer you get. If you do go the route of the p1p, you can actually print yourself an enclosure for fairly cheap. Look up arc or vision enclosures. That being said though, the enclose kit to convert your p1p to a p1s is only $150 which is very competitive with any self made closure when you factor in acrylic costs.
So, my recommendation, if you think you don’t really need ABS or ASA, buy the p1p. It will work great for you. If you decide down the road you want to enclose it, buy the kit directly from bambulabs or print one yourself.
It’s funny cause I always kinda thought that was a bit of hyperbole regarding uv exposure.
Made a bracket to fix a broken mount for our back seat cam in our car. Printed in pla just to test the dimensions. It worked so I left it in the car. Didn’t make it a single day. Completely warped.
Reprinted in petg and it’s been going strong for 2 weeks now.
Any reason why you chose cf filament for this? Seems like it’s not under any stress that would need the tougher filament. Just curious I have yet to print in a cf filament.
Came here to take a silly poll about drinks, came away with some actual interesting reading about better election methods. Thanks man. A shame this will never change in the US but one can dream…
Maybe you see a plant you have to collect in game or a rock wall that looks different. What items have you caught out of the corner of your eye that you realized was just your brain so focused on looking for things in a game that you saw it IRL and made you double take?
Before I can recommend anything, I have to ask you some questions.
Are you wanting a printer that you will spend more time tweaking and modifying than actual printing? Or do you want something that just works right out of the box?
Do you care about it being open source and upgradeable?
What’s your price range?
Do you want to print miniatures and other fine detailed objects?
Yea, the prusa Mk4 is a great option for you, but honestly even an mk3s kit might be worth looking into. Save a bit of money and you can always buy the upgrade kit to the mk4 later down the line of you deem it necessary.
If you want a printer working straight out of the box and don’t care about it being closed source, I cannot recommend the p1p enough. it has been night and day change from my last printer. literally just set it and forget it.
I would definitely steer clear of the ender 3s or other i3 style clones. You spend 95% of your time trying to tune and fix your printer instead of actually using it.
Also, since you don’t care about printing anything other than pla, you shouldn’t need an enclosure. with any of the mk3s, mk4, p1p, or x1c you are going to be able to print pla and petg perfectly fine with minimal tweaking.
I started 3d printing back when you had to build it all from scratch, and it seemed ABS was the only filament to be found. PLA came along soon enough and made things sooo much easier. Then came some more exotic ones like TPU or Nylon I think, but I never tried them out because they seemed pretty niche....
How are the voc’s? I just upgraded to a p1p and I’ve just finishing building out an enclosure for it. Not actually sure what the extruder on this is rated for but I’m upgrading the hotend to hardened steel next so I can print a bento box in asa.
Might give PC a look if it’s something I think this printer can handle.
You say this like it’s a bad thing. If I could get away with just paying for my one hockey team, instead of the legit, 3 fucking services you have to have currently to watch an entire season, I would do it on a heartbeat.
The bambulabs p1p. It just dropped in price to $599 USD. Not sure what that exchange rate is.
It is an absolutely freaking fantastic printer. I have been kicking myself for days now for not buying this thing sooner.
It sucks that it’s not open source, but if you want a no fuss printer that just works, the p1p is hands down the best available on the market at that price point.
As a new owner of a p1p. It’s the single best decision I’ve made as far as the 3d printing hobby goes. I cannot tell you how much time and money I sunk into my old bed slinger printer and the results never even got close to this thing out of the box.
The only downside? You’re gonna absolutely tear through filament because of how well and fast it prints.
By the CBA, DeAngelo cannot return to Carolina within a year of his trade from the Canes, especially when salary is retained. The two teams are set to discuss with the league in Nashville, who could either sign off on the trade or force both teams to wait until July 9th....
Telltale is back! The Expanse: A Telltale Series launches today (ghostarchive.org)
Hi guys, what 3D Printer do you recommend for a beginner?
I am looking to buy a 3D printer which will be used in my small business size of about 20 people. We sometimes need little parts made for holding littles pieces of equipment and after seeing a similar lab to us use 3D Printing to make little holders for their antennas, we are looking at buying one ourselves....
Tumblr is losing $30M each year, CEO says (techcrunch.com)
[GONE] Giving away a TL invite. Not selling or trading, it's just yours.
As per title. None of my IRL friends would have a clue what to do with it, so I want it to go to someone who knows what they’re doing....
I made a mount for my Xbox to hide it behind my free standing TV. (i.imgur.com)
pretty pleased with my first print with PETG-CF (files.catbox.moe)
Keyfob remote - Glow Edition (lemmy.world)
https://lemmy.world/pictrs/image/2e682676-665d-4d25-b02e-50ece4fc6078.jpeg...
What is Lemmy's Favorite Beverage? [Ranked-Choice Poll]
Which of these options are you favorites? Rank up to 5 options:...
How often have games made you do a double take in real life? (i.imgur.com)
Maybe you see a plant you have to collect in game or a rock wall that looks different. What items have you caught out of the corner of your eye that you realized was just your brain so focused on looking for things in a game that you saw it IRL and made you double take?
when its all gotten maybe a little out of hand (lemmy.world)
What to buy?
• Experience: none • Size: > 20x20x20 cm • Price Range: 800-1500€ • Print Medium: PLA...
Beyond PLA and ABS?
I started 3d printing back when you had to build it all from scratch, and it seemed ABS was the only filament to be found. PLA came along soon enough and made things sooo much easier. Then came some more exotic ones like TPU or Nylon I think, but I never tried them out because they seemed pretty niche....
We’re in a Golden Age of Illegal Sports Streams (www.theatlantic.com)
But why should anyone have to break the law to watch the Mets?
Buying Advice
Hi folks,...
It’s true (i.imgur.com)
Unless they're from Winnipeg and/or Mennonite ;) (lemmy.ca)
DeAngelo / Carolina trade held up by CBA clause (media.discordapp.net)
By the CBA, DeAngelo cannot return to Carolina within a year of his trade from the Canes, especially when salary is retained. The two teams are set to discuss with the league in Nashville, who could either sign off on the trade or force both teams to wait until July 9th....