rug_burn

@rug_burn@sh.itjust.works

This profile is from a federated server and may be incomplete. Browse more on the original instance.

rug_burn,

I think it’s a good added measure to stop a print, in this case something caused the spaghetti, it would have kept causing spaghetti but the cover popping off stopped the print. I’ve got about 400 hrs on my p1s (upgraded from p1p), and I’ve never had the faceplate pop off. I would guess this is an isolated incident.

rug_burn, (edited )

I would agree on Yamaha, just make sure you play it 1st and get a good setup or learn to do it on your own. I don’t own one but have handled a couple, I’d say they come in a bit nicer than the Ibanez Gio stuff and just under their lower main line of instruments. Depending on what price point the Epiphones are you can also get a great guitar cheap - their set neck models, pound for pound, are better built than their Gibson counterparts, mainly because Gibson still cuts the headstock along with the neck, creating a weak spot. Epiphones are done with a scarf joint which is much stronger if it happens to take a spill.

rug_burn,

Having six throwing stars and a shitload of buffs… as a potato

rug_burn,

But… do you believe in life after love???

Just fucking with you. I hate every note of every song she’s made, too

rug_burn,

Sadly, it seems any mass gathering is a potential target for this kind of bullshit. Regardless of the number of law enforcement in the area, it only takes seconds to mag dump pretty much any firearm. I’d be interested to know if the victims were complete bystanders or if this was the result of some sort of altercation.

rug_burn,

That’s crazy. Hope they’re OK.

rug_burn,

That’s good. Have to feel sorry for the people around when it happened, it’s a terrifying situation all around.

rug_burn,

Fuck 'em. Drink on the job. Don’t ruin your days off.

sj_zero, to 3dprinting

Short side hamper handle from the top:

https://social.fbxl.net/media/c06e0e29294d96565b1b189f3bde757486e4af9d79cb92ab3387419f5a802f4b.jpg

Long side hamper handle from the bottom:

https://social.fbxl.net/media/9890d325f4126ae3d58d94435392bff91c44b5f6b557e39a97bf5e16f891b1c7.jpg

I always enjoy prints that just become part of our lives (and especially ones that let us keep using something that's going to the landfill otherwise)

The hamper has handles that break. For most people I think that'd be time to replace it. I didn't want to do that, so I designed a new handle based on the handle on the short end. This ended up being a mistake later, I'll explain then.

I printed 2 handles (the connection between the two is just to make the printing work better since it can print the two pieces as one piece, then I just snap the two apart and clean up the spot they were connected)

I used my rotary tool to remove the remnants of the original handles. I should have used the cutting tool but I had the diamond grinder so I used that. It worked fine, I was able to fully remove the old material. A quick test fit confirmed that the handle design was pretty good (I just used a tape measure for the measurements so this was a real potential problem)

I went to the long side, but realized that the design of the hamper was different lengthwise than widthwise. I removed a couple tabs that were going to block the new handle, and instead of putting it in as designed, I just put it sideways, which fit.

I put the two in and added gorilla glue. Gorilla glue requires water to foam up, so I wet all the parts. Now everything is fitted, the glue is in, and it's just drying now. I'd consider this repair a success, and I expect the strong PLA part to give the whole hamper a lot more stiffness at those parts, and there's significantly more material in these spots that break. If the other two handles break, I'll just print two more, and at that point I can't help but think that the hamper will be bulletproof.

rug_burn,

Love it when printers actually solve a problem!

rug_burn,

Oh boy. Lay off the Maddow. You were there? In the room? Neat! Bust out the tapes and prove that’s what happened!!!

rug_burn,

Like they say, “don’t feed the bears”

That and I was feeling particularly feisty last night.

rug_burn,

Your statement was about the cognitive test he was bragging about, that’s what I was responding to. I fully admit that Trump will brag about anything, not sure where you were going with that statement. If you’d like to take it in another direction, feel free.

rug_burn,

At work, about 1,100 miles away. But I was there in spirit, so come get me!!!

rug_burn,

Minority view or not, it’s correct. Just because it’s a majority doesn’t make it correct.

rug_burn,

Point to a clip where he told people to bum rush the capitol, riot, and shit on Pelosi’s desk. I’ll wait.

rug_burn,

That’ll show me!

rug_burn,

What, pray tell, gives you that idea? Considering i seem to know more about it than most of the people in this thread that want to pull some sort of “gotcha” on me, id argue the opposite. What do you find me to be in disagreement with the constitution on? Only arguments I’ve made here have been that there’s no proof that Trump ordered an assault on the capitol. If your argument is that they were whipped up by his rhetoric (and I’d like to see it in context, including the “peacefully and patriotically let your voices be heard” part included), then way more people need to be imprisoned longer for their “involvement” in the BLM/antifa riots of 2020. Maxine Waters literally stated that if you see a “Trumper” in a public place to get in their face and tell them they’re not welcome. Seems to be pretty inciting speech, yet she’s free to roam about and squander our tax dollars (like both sides do, I’m not disputing that). You don’t really believe any of this shit, you just hate Trump and see it as an excuse to remove him from politics and to serve as a warning to anyone who dares to stand in the way of your progressive agenda.

Saying I was “there in spirit, so come get me” was pretty obviously a joke. If you don’t like it, that’s on you.

rug_burn,

Finally a well thought out and reasonable response. I appreciate that, along with the lack of name-calling.

The issue at hand is, mere negligence, even if it was ruled as such, rarely elicits a conviction, and oftentimes won’t even resort in charges. Stack that with the resentment that roughly 50% of the voting public (not ongoing to argue numbers, just using it as a rough guide) would see it as an attack on the person whom they believed in and voted for (or saw as a foil to someone they liked less, in this case Biden).

There’s also the issue that criminal negligence is notoriously hard to convict on, and in the highly unlikely scenario it were charged, convicted and sentenced, it wouldn’t take a dream team of lawyers to overturn based on unequal application of the law, which, in this case, wouldn’t take more than watching the nightly news.

None of this is stating that it’s my belief that he was criminally negligent by using the terms “fight like hell” and such, I do not. It’s common enough vernacular in the English language that to try and indict, let alone convict on it is pretty paper-thin.

Look, I understand that roughly half of the country dislikes him, if not outright hates him. However, that isn’t enough to throw out precedent in an attempt to remove him from the ballot. The fact that it is being tried in several states is, in its pure form, fascism.

Interesting that you bring up the possibility of false flag actors, I wasn’t going to go there, but I do appreciate the honesty in that it is quite possible there were some there.

rug_burn,

You won’t find much of an argument with me on any of these points. We see our freedoms get trampled on in the name of… whatever, and too many people just say “thank you sir, may I have another”.

rug_burn,

Guess it depends on what the definition of “is” is. Hate it all you want, I’m right.

  • All
  • Subscribed
  • Moderated
  • Favorites
  • bokunoheroacademia
  • magazineikmin
  • Durango
  • khanakhh
  • slotface
  • Youngstown
  • InstantRegret
  • kavyap
  • DreamBathrooms
  • mdbf
  • rhentai
  • thenastyranch
  • rosin
  • everett
  • Leos
  • osvaldo12
  • tacticalgear
  • cisconetworking
  • GTA5RPClips
  • ethstaker
  • lostlight
  • tester
  • cubers
  • normalnudes
  • modclub
  • HellsKitchen
  • relationshipadvice
  • sketchdaily
  • All magazines