@seaQueue@lemmy.world
@seaQueue@lemmy.world avatar

seaQueue

@seaQueue@lemmy.world

I’m a little teapot 🫖

This profile is from a federated server and may be incomplete. Browse more on the original instance.

r/The_Donald helped radicalize users into far-right identities and discourse – Active users on r/The_Donald increasingly used white nationalist vocabularies in their comments within three months. (journals.sagepub.com)

I know most people that were on reddit at the time are fully aware of this and won’t be surprised but don’t dismiss the findings out of hand. It’s important that studies are being conducted and the fact that the finding match our lived experience is still noteworthy.

seaQueue,
@seaQueue@lemmy.world avatar

https://lemmy.world/pictrs/image/29abad51-991a-4430-9dad-44488c78eabe.png

seaQueue,
@seaQueue@lemmy.world avatar

If they’re proactive about taking patches this will really help reduce issues with the dkms driver

seaQueue,
@seaQueue@lemmy.world avatar

Good news Thomas, you can resign and leave!

seaQueue,
@seaQueue@lemmy.world avatar

The US is a kleptocracy, we’re ruled by the people who have looted the public

seaQueue,
@seaQueue@lemmy.world avatar

Funny how the national debt only ever comes up when Republicans want something

seaQueue,
@seaQueue@lemmy.world avatar

I think it’s more like small bugs in the kernel portion will be fixed faster. There are a lot of small patches needed to build the dkms module against the kernel as mainline and stable evolve - they’re often carried in various distro packages until upstream (Nvidia) picks them up for a future release. The open driver should speed that cycle along.

seaQueue,
@seaQueue@lemmy.world avatar

Pro life sentence

seaQueue,
@seaQueue@lemmy.world avatar

And signal integrity. At modern speeds trace lengths are spec’d in mils and dimms can be tough to design for (or just more expensive) so OEMs just solder ram directly.

seaQueue,
@seaQueue@lemmy.world avatar

A lot of that was infomercial TV grifting too. There were so many companies selling “emergency tools” to cut seatbelts and shatter windows a few years ago.

seaQueue,
@seaQueue@lemmy.world avatar

Honestly anything shipping a MATE desktop edition would be good too. MATE is similar enough to windows that most people get it pretty quickly.

seaQueue,
@seaQueue@lemmy.world avatar

Gnomes workflow is a big departure from windows, but with its gesture navigation on a trackpad, I think it’s a highly superior way to use a laptop. My desktop gets KDE Plasma, but if I had a laptop it would use gnome

+1, GNOME dumps the whole desktop and taskbar thing in favor of gestures and the overview. Once you get a feel for it I think it’s honestly a lot more usable than traditional taskbar and desktop icon GUIs.

seaQueue, (edited )
@seaQueue@lemmy.world avatar

I mean, Canonical is a for profit company so I’m not sure what anyone was expecting. Ubuntu had its moment in the sun where it was considered the newbie friendly Linux distro for free users but now they’re going pretty hard for corporate customers and enterprise features. Which is fine, they need money to stay afloat and some enterprises are into them so more power to them - they contribute a lot of time and money to various Linux projects. They’re the Debian derived redhat equivalent these days and that’s okay, if they pivot too far in their own interest people will just stop using their distro.

How do you store your grounded coffee? (slrpnk.net)

Hiya, just quickly wondering how people store their coffee? Mine is in a tin box I got second hand, cos I thought it looked nice. Any rules regarding storing grounded coffee? I don’t store much at the time, it’s just if I grind a little too much and what not. I’m assuming the general thumb rule for this is to store it in a...

seaQueue,
@seaQueue@lemmy.world avatar

Don’t store ground coffee? Buy an inexpensive hand grinder from someone who’s moved up to a more expensive model and keep your beans whole until you’re ready to brew.

Coffee stales amazingly quickly and there’s really no good way to prevent it, the longest I’d store ground coffee for is like half a day (if I’m taking some ground coffee to work to make a cup mid day.)

If you absolutely must store ground coffee an airtight container should work but it won’t be terribly fresh after a day or two.

seaQueue,
@seaQueue@lemmy.world avatar

I’m out of the loop here, you’re better off making a new post and asking everyone. I ascended to a $200+ 1zpresso last year and I’m never going back. Someone on Reddit bought it and had buyers remorse so when I saw it listed for half price I couldn’t resist.

I can tell you not to buy the Hario Skerton or Skerton Pro though; both were incredibly inconsistent and I had a terrible time brewing using them. Even with stabilizer ring mods they both made a ton of fines and boulders, they weren’t good for anything except very coarse grind cold brew.

seaQueue, (edited )
@seaQueue@lemmy.world avatar

I see a lot of people recommending the Timemore C2 as a cheap first grinder. Look for one on AliExpress and it’ll be cheaper than scAmazon. <$50 that sounds like the best option. I dug around a bit earlier and it looks like you can get one for ~$40 when they’re on sale.

seaQueue,
@seaQueue@lemmy.world avatar

Yeah, I have a 1zpresso k ultra and it’s a phenomenal grinder. I haven’t fired up my electric grinder since I bought it.

seaQueue, (edited )
@seaQueue@lemmy.world avatar

I’m actually in favor of this one, it solves a bunch of the problems that have been leading mfgrs to solder memory directly to mainboards.

Edit: the removable CAMM connector is awesome too, the biggest problem with the v1 spec was the fragility of the pins. Anecdotally you could wreck a v1 connector with canned air so a replaceable connector is great news.

seaQueue,
@seaQueue@lemmy.world avatar

This is v2 of the CAMM spec and it’s awesome. They’ve solved all of the major issues that were causing laptop mfgrs to solder ram directly to the motherboard and they’ve nailed the biggest problem with v1 which was the ease of damaging the CAMM connector pins. Apparently you could wreck the v1 connector with compressed air if you weren’t paying attention, which makes tool-free connector replacement in v2 a great addition.

seaQueue,
@seaQueue@lemmy.world avatar

Rural communities across the entire country are struggling to hire doctors. It turns out that smart young people just don’t want to work in Jesusland for some strange reason.

What happened to glibc-widevine ? (aur.archlinux.org)

I watch the F1 on NowTV. In windows this works fine in Firefox but not in Linux. My research turned up various posts linking to the “widevine” package that depends on “glibc-widevine” but that seems to have disappeared. What happened to it? did it work? where can I get it? is there an alternative?

seaQueue,
@seaQueue@lemmy.world avatar

Does edge still provide the best streaming experience on Linux? I haven’t streamed anything from my Linux machines in a while but that used to work well for most streaming providers. It coaxed 1080p out of a couple that would only serve 720p to Chrome IIRC.

seaQueue,
@seaQueue@lemmy.world avatar

Thanks, please pull forward to the next window

seaQueue,
@seaQueue@lemmy.world avatar

+1 cp -a --reflink is super useful for making quick no cost clones of huge directories.

seaQueue,
@seaQueue@lemmy.world avatar

I’m hopeful this is further developed and licensed out. I’d love to have one of these setup at home as part of a VR rig

seaQueue,
@seaQueue@lemmy.world avatar

Bing is even more heavily monetized and encrusted with garbage than Google is.

seaQueue,
@seaQueue@lemmy.world avatar

Yeah, well PC LOAD LETTER

  • All
  • Subscribed
  • Moderated
  • Favorites
  • •
  • Leos
  • ngwrru68w68
  • hgfsjryuu7
  • InstantRegret
  • Youngstown
  • rosin
  • slotface
  • everett
  • mdbf
  • tacticalgear
  • kavyap
  • thenastyranch
  • DreamBathrooms
  • PowerRangers
  • anitta
  • magazineikmin
  • vwfavf
  • cisconetworking
  • cubers
  • modclub
  • GTA5RPClips
  • khanakhh
  • Durango
  • osvaldo12
  • normalnudes
  • tester
  • ethstaker
  • provamag3
  • All magazines
    •