KyuubiNoKitsune, 1 month ago (edited 1 month ago) If you have the default nozzle for the Neptune 3, then I believe that the PTFE tube runs right down to the nozzle? If so, that’s probably where the issue is coming from. Get yourself a bi-metallic heat break and replace the stock one. They’re cheap and easy to replace. The printers that I’ve had jamming issues with have been fixed by replacing the heat break with an all metal one. You just have to lower your retraction to 2-3mm or it jams as well. Looks like the Slice Engineering Copperhead C-E fits the Neptune 3
If you have the default nozzle for the Neptune 3, then I believe that the PTFE tube runs right down to the nozzle?
If so, that’s probably where the issue is coming from.
Get yourself a bi-metallic heat break and replace the stock one.
They’re cheap and easy to replace. The printers that I’ve had jamming issues with have been fixed by replacing the heat break with an all metal one.
You just have to lower your retraction to 2-3mm or it jams as well.
Looks like the Slice Engineering Copperhead C-E fits the Neptune 3