Gravitricity: Storing energy using gravitational potential

I have been following them for a few years and they are making some slow and steady progress

From their page: As the world generates more electricity from intermittent renewable energy sources, there is a growing need for technologies which can capture and store energy during periods of low demand and release it rapidly when required.

At Gravitricity we are developing innovative, long-life, underground technologies which store energy safely and deliver it on demand at a lower lifetime cost than current alternatives.

MonkderDritte,

I once saw images of 100’s meters deep, ~10 meter wide ventilation holes of african mines (of course unsecured). So there are “drills” for that. Why not use something like this for hydro power storage, without the hull and all? Sure, the ground needs to be suitable.

tobogganablaze,

Why it is a bad idea.

UmbraTemporis,

Timberborn!

schmorpel,

No. This problem has been solved long ago, with water. Water is already providing gravitational energy storage all over the world. I don’t think using different types of weight adds value to the process.

UmbraTemporis,

I think Gravitricity (obligatoy, stupid name) is trying to make it more space efficient and consolidated, rather than occupying massive amounts of land.

Water also isn’t the safest thing when in massive reservoirs, nor is it all too easy to get it there in the first place.

So while you’re correct in the sense that we have GPE batteries, they aren’t super easy to build nor maintain. I think this is where [stupid name here] is trying to place themselves.

schmorpel,

You are probably correct, there’s probably gravity energy applications where water isn’t the best option.

ironhydroxide,

The only way to make this crane system work reliably would be to enclose it entirely to protect it from wind, and/or build a huge frame around it to keep the blocks sufficiently aligned… making it a much larger undertaking than just a crane with a bunch of blocks around it.

UmbraTemporis,

Putting the blocks onto some internal rail is probably the easiest way, with wheels in constant contact, similar to an elevator.

lens17,

“Underground” is mentioned in the text above. I know that some people are considering to store heavy blocks connected to ropes in the shafts (?) of old coal mines that go down hundreds of meter. Use a single, very heavy block and you’re good to go. Though I don’t think that it holds a significant amount of energy (too lazy to calculate and no feeling for the possible dimensions of such a block). Also, digging new shafts should be prohibitively expensive for energy storage.

ironhydroxide,

Ah yeah I missed that underground part, I mixed it up with another proposal for a freestand crane doing the same…

antrosapien,

Currently, they are specifically advertising that they can provide really large amount of power for very short time. I don’t know where I read this but CERN is storing discharging some big capacitors to jump start LHC, and gravitricity can provide same power by parallely lowering heavier weights. source required

  • All
  • Subscribed
  • Moderated
  • Favorites
  • •
  • solarpunk@slrpnk.net
  • ngwrru68w68
  • DreamBathrooms
  • khanakhh
  • magazineikmin
  • InstantRegret
  • tacticalgear
  • thenastyranch
  • Youngstown
  • rosin
  • slotface
  • modclub
  • everett
  • kavyap
  • Durango
  • JUstTest
  • osvaldo12
  • normalnudes
  • cubers
  • ethstaker
  • mdbf
  • tester
  • GTA5RPClips
  • cisconetworking
  • Leos
  • megavids
  • provamag3
  • anitta
  • lostlight
  • All magazines
    •