Does anyone know if there’s a way to launch f launcher instead of the shitty Google home screen when the unit resumes from sleep? I essentially want to make it where I never ever see the Google home screen ever
Just thought I would quickly share what can happen if you’re not paying attention with a heavy mass spool if you’re not careful. I have all my spools on a dowel rod attached to the top of my printer enclosure and fed through an opening in the top. Never had the slightest issue with 1 kg spools, and I thought I would save a...
Hi everyone - I’m doing some prototyping on a part I’m designing. The final part will take up nearly the entire build plate, but for a test print, I’m using a negative modifier to remove 80% of the part, leaving only a sliver to print. The problem is that once sliced, the part left to be printed is way over on the edge of...
All the sanding blocks I have seen are the nut and bolt type, but i found myself wanting something more of just a … block. No adjusting, loosening, tightening, moving, just wrap your sandpaper around an edge and go. So I spent 15 minutes in FreeCAD and made one. So far it’s working great....
I’m contemplating a Prusa MK4 + official enclosure and I’m looking at the way the enclosure handles filament feeding into the (N)extruder. Normally, filament is loaded directly from the spool into the extruder, but with the official enclosure, I see it’s fed through a PTFE tube and coupler. It seems to me this would make...
Hi all, I have a quick question about my z screw coupler (as i understand it, the metal cylinder at the bottom you can manually move your z axis up and down with)....
I still have no idea what I’m doing really. Just too determined to give up I guess, and it’s been such fun. Anyway I made a guitar pedal light switch cover. Still a lot of work to do, and every time I look at FreeCAD the wrong way, the model breaks, but it’s been a fun experience nonetheless....
Good morning friends! I’m still fairly new to 3D printing, although I’m learning a lot more to be dangerous now. I’m printing this part, and I have cleaned and leveled the bed, as I do before every print, and usually have very few issues. This time, my first layer went down almost perfect, with the exception of the bottom...
I’m a beginner 3D printing novice. I have done about 5-6 successful prints so far, and my last two have technically come out fine, but they seem very brittle. By brittle, i mean that both prints have snapped cleanly into several pieces, not by design. My extremely novice research has led me to think it’s a layer adhesion...
I’m getting into 3D printing, and due to the nature of my living constraints, I find myself with a large 12 ft x 20 ft non-climate controlled but clean shed from which to print. I bought one of these small microenvironment enclosures for my ender 3 pro, but temperatures here in the winter can reach the teens, and summers over...
Hello community, I’ll try to be brief. My 13 year old son got a 3d printer as a gift, and I’d like to learn alongside him. We have 0 experience. However, I am a data scientist, so lots of professional Python experience, if that helps. We’re a foss/Linux family so my questions are:...
My new Lemur Pro arrives tomorrow, and I’d like some guidance on charging via USB-C - is it recommended at all? I know it lists it supported, but i want to make sure I’m not doing anything ill-advised, and grab the right charger....
I was very confused until I realized a comment I read was from someone with my username, but registered to a different Lemmy instance. By identifies, I mean the username is highlighted and the blue avatar indicating it’s me is present. Also, this doesn’t feel like the best place to report bugs, is there a better way?
I’m looking at making a fun project for generating media recommendations based on past viewing behavior and I’d like to know if the API exposes something like “previous N items that user X played”...
After 7 long, agonizing months waiting, I got my PJD Woodford Elite today! It’s a custom design, which Leigh at PJD was very gracious to allow me to choose...
I know this is going to sound like some clickbait bullshit title, but I’m genuinely curious, asking in good faith. My two oldest sons are enamored with him, and he seems like a genuine guy, so I’m asking - is he a nice guy? If you google the question, you get a bunch of reddit hate, which I don’t always trust,...
I got this fun fee after trying to order takeout from Buffalo Wild Wings (yes I'm naming and shaming). How exactly does adding a dollar help you operate takeout? It's literally less work than waiting on a table. This is nothing more than a shameful cash grab to pad profits....
Hey everyone, great to see this community over here at Lemmy. I'm looking for recommendations on the best brand of bottled water? I ask for both taste and sustainability, and ethics of the company, or any combination of the above lol
It's based on the 000 C-16 body style, but the label literally just says "custom guitar 154/200". It was part of a limited run around 2005, when I bought it new. I love it!...
For me, I continually watch and listen to new music and guitarists - If i practice the same things over and over and over every day, I will slowly lose interest in playing. Often I find that when i learn something half decent but hit a wall, if i come back to it in 6 months, I can break through that wall easier. It’s all about...
If I registered at lemmy.world, is it possible to still comment on a thread at say lemmy.ml? I get the expected "You are not logged in" and while subscribing is easy enough, I'm not able to comment or interact with other instances. This seems normal as users are unique per instance, I just want to make sure I'm not missing a key...
Automatically launch f launcher after sleep
Does anyone know if there’s a way to launch f launcher instead of the shitty Google home screen when the unit resumes from sleep? I essentially want to make it where I never ever see the Google home screen ever
I thought I would buy a 3 kg spool because lazy, don't be me.
Just thought I would quickly share what can happen if you’re not paying attention with a heavy mass spool if you’re not careful. I have all my spools on a dowel rod attached to the top of my printer enclosure and fed through an opening in the top. Never had the slightest issue with 1 kg spools, and I thought I would save a...
I think the universe is trying to tell me something about my e string bends (lemmy.world)
In the span of 2 days, I’ve managed to break the E string on two of main jam guitars. Bad luck, or bad technique? I’m betting on the latter lol
Sigh. (lemmy.world)
Spotted this in a store today and promptly put my shit that I didn’t need back on the shelf and walked out....
PrusaSlicer - Need some quick help with prototype printing
Hi everyone - I’m doing some prototyping on a part I’m designing. The final part will take up nearly the entire build plate, but for a test print, I’m using a negative modifier to remove 80% of the part, leaving only a sliver to print. The problem is that once sliced, the part left to be printed is way over on the edge of...
I made a simple sanding block for my own use. (lemmy.world)
All the sanding blocks I have seen are the nut and bolt type, but i found myself wanting something more of just a … block. No adjusting, loosening, tightening, moving, just wrap your sandpaper around an edge and go. So I spent 15 minutes in FreeCAD and made one. So far it’s working great....
For funsies, i designed and 3D printed a TS9 style light switch cover. (lemmy.world)
I won’t profess to be a design mastermind, but it was a fun process. I learned a lot and it was a lot of fun.
Prusa MK4 with enclosure filament feeding
I’m contemplating a Prusa MK4 + official enclosure and I’m looking at the way the enclosure handles filament feeding into the (N)extruder. Normally, filament is loaded directly from the spool into the extruder, but with the official enclosure, I see it’s fed through a PTFE tube and coupler. It seems to me this would make...
Question about Z screw coupler
Hi all, I have a quick question about my z screw coupler (as i understand it, the metal cylinder at the bottom you can manually move your z axis up and down with)....
One month ago, I didn't really know what 3D printing was. Yesterday, I designed in FreeCAD my first model and printed it. What an amazing experience.
I still have no idea what I’m doing really. Just too determined to give up I guess, and it’s been such fun. Anyway I made a guitar pedal light switch cover. Still a lot of work to do, and every time I look at FreeCAD the wrong way, the model breaks, but it’s been a fun experience nonetheless....
An "almost" perfect first layer help
Good morning friends! I’m still fairly new to 3D printing, although I’m learning a lot more to be dangerous now. I’m printing this part, and I have cleaned and leveled the bed, as I do before every print, and usually have very few issues. This time, my first layer went down almost perfect, with the exception of the bottom...
Issues with layer adhesion (i think)
I’m a beginner 3D printing novice. I have done about 5-6 successful prints so far, and my last two have technically come out fine, but they seem very brittle. By brittle, i mean that both prints have snapped cleanly into several pieces, not by design. My extremely novice research has led me to think it’s a layer adhesion...
Generally speaking, how much temperature can an ambient enclosure account for?
I’m getting into 3D printing, and due to the nature of my living constraints, I find myself with a large 12 ft x 20 ft non-climate controlled but clean shed from which to print. I bought one of these small microenvironment enclosures for my ender 3 pro, but temperatures here in the winter can reach the teens, and summers over...
Absolute beginner with questions
Hello community, I’ll try to be brief. My 13 year old son got a 3d printer as a gift, and I’d like to learn alongside him. We have 0 experience. However, I am a data scientist, so lots of professional Python experience, if that helps. We’re a foss/Linux family so my questions are:...
A question regarding USB-C charging on newest Lemur Pros
My new Lemur Pro arrives tomorrow, and I’d like some guidance on charging via USB-C - is it recommended at all? I know it lists it supported, but i want to make sure I’m not doing anything ill-advised, and grab the right charger....
Sync identifies a comment as me, if it's from someone with the same username but on a different instance.
I was very confused until I realized a comment I read was from someone with my username, but registered to a different Lemmy instance. By identifies, I mean the username is highlighted and the blue avatar indicating it’s me is present. Also, this doesn’t feel like the best place to report bugs, is there a better way?
Does the Jellyfin API expose play history for a specified user?
I’m looking at making a fun project for generating media recommendations based on past viewing behavior and I’d like to know if the API exposes something like “previous N items that user X played”...
New guitar day, all the way from England - it's PJD Guitars! (lemmy.world)
After 7 long, agonizing months waiting, I got my PJD Woodford Elite today! It’s a custom design, which Leigh at PJD was very gracious to allow me to choose...
Where does a General keep his armies?
In his sleevies.
Is Mr Beast a good person?
I know this is going to sound like some clickbait bullshit title, but I’m genuinely curious, asking in good faith. My two oldest sons are enamored with him, and he seems like a genuine guy, so I’m asking - is he a nice guy? If you google the question, you get a bunch of reddit hate, which I don’t always trust,...
Chain restaurant fees are getting absurd
I got this fun fee after trying to order takeout from Buffalo Wild Wings (yes I'm naming and shaming). How exactly does adding a dollar help you operate takeout? It's literally less work than waiting on a table. This is nothing more than a shameful cash grab to pad profits....
best bottled water?
Hey everyone, great to see this community over here at Lemmy. I'm looking for recommendations on the best brand of bottled water? I ask for both taste and sustainability, and ethics of the company, or any combination of the above lol
my custom Martin
It's based on the 000 C-16 body style, but the label literally just says "custom guitar 154/200". It was part of a limited run around 2005, when I bought it new. I love it!...
What inspires you to pick up the guitar every day?
For me, I continually watch and listen to new music and guitarists - If i practice the same things over and over and over every day, I will slowly lose interest in playing. Often I find that when i learn something half decent but hit a wall, if i come back to it in 6 months, I can break through that wall easier. It’s all about...
Commenting across instances
If I registered at lemmy.world, is it possible to still comment on a thread at say lemmy.ml? I get the expected "You are not logged in" and while subscribing is easy enough, I'm not able to comment or interact with other instances. This seems normal as users are unique per instance, I just want to make sure I'm not missing a key...