I finally got a filament drying box and I’m using it prior to and during prints. It seems to be helping. I’m a bit of a color queen, so I keep a pretty big backlog of different filaments. I’ve been storing them in vacuum bags but the vacuum bags often seem to lose some of their vacuum after a few months; the whole process...
Da die Karte sich halbwegs deckt mit der aktuellen Windkarte, würde ich drauf tippen, dass das von den ganzen Kaminen kommt, die in den letzten Tagen befeuert wurden. Da diese Abgase in den aller meisten Fällen komplett ungefiltert in die Luft gelangen gib es während kalten Wintertagen öfters schlechte Luft. Wenn dann noch kaum Wind weht, bleiben die Verunreinigungen lange in der Luft. (Bin kein Experte, nur meine persönliche Meinung und Beobachtung)
I’m moderately tech savvy, a little experience with most OS and comfortable with hardware. I’ve got some basic things working in Docker. I want to start self hosting my photo backup, Bitwarden, Jellyfish, Sonarr and Radarr, Pi hole, Home Assistant and replace Dropbox. But the more I dive into the hardware and setup the more...
This is the route I went. SFF PC with I5 3rd gen, 8GB RAM and about 20 docker Containers running at the moment @ 10% - 15% CPU usage and 3GB memory.
Power consumption is around 15W. A bit more than a Raspi but much more potent and with a easy upgrade path.
So far I have absolutely no rerets. For most things self hosted the cpu is not that important. Even transcoding is no problem with the integrated iGPU.
I have the (more or less) same setup. Your DNS entries on your pihole instance should point to the local ip of your server (192.168.x.x).
If thats the case check the dns settings of your router. Under DHCP settings there should be a input field for your dns server. This has to be the local IP of your pihole.
One thing you could do to start diagnosing the Problem is running this command: nslookup servicename.yourdomain.tld. This should return your local IP and not a public one.
How do you determine that the requests are leaving your Network?
Pihole seems to upstream your requests although there is a local entry for that domain in your settings. Maybe it has something to do with using IPv6? Maybe your device prefers the cloudflare IPv6 over your local IPv4 address.
Or Maybe your device queries your pihole as well as your Router to get the IP. Check your current dns server on your device: ipconfig /all (Windows)
Are filament vacuum bags worthwhile?
I finally got a filament drying box and I’m using it prior to and during prints. It seems to be helping. I’m a bit of a color queen, so I keep a pretty big backlog of different filaments. I’ve been storing them in vacuum bags but the vacuum bags often seem to lose some of their vacuum after a few months; the whole process...
2023 wurden in 64,0 Milliarden Zigaretten versteuert. Das waren 2,7 % weniger als im Jahr 2022. Im langfristigen Vergleich zum Jahr 1991 ging der Absatz um mehr als die Hälfte zurück (www.destatis.de) German
Was ist denn heute mit unserer Luft los? (feddit.de) German
War überrascht wo ich heute Morgen sah, dass in großen Teilen Deutschlands die Luft eine schlechte Qualität hat. Weiß jemand woher das stammen könnte?
ich🎙️iel (feddit.de) German
Getting in a pickle over hardware
I’m moderately tech savvy, a little experience with most OS and comfortable with hardware. I’ve got some basic things working in Docker. I want to start self hosting my photo backup, Bitwarden, Jellyfish, Sonarr and Radarr, Pi hole, Home Assistant and replace Dropbox. But the more I dive into the hardware and setup the more...
Routing local requests directly to server instead of cloudflare tunnel
Hey everyone, I wanted to ask for some help regarding my DNS setup and for routing requests to my selfhosted services....