The nvidia/vulkan open source driver is apparently pretty rad. I haven’t had a chance to test it myself yet since I am running a dual gpu setup that contains one gpu that isn’t supported. The original maintainer for nouveau is apparently also working at Nvidia and contributing to the project as an Nvidia employee now too soooo maybe they are turning over a new leaf?
But duck duck go has ads… They are just as search results. My Pihole will actively block access to those links because they are promoted content. They also have a little “ad” tag alongside the post.
To add to this. Both parties told all other creators that all music that was made in this dispute would not be subject to copyright claims. So far all claims made from Kendrick’s label have been dropped which has allowed critics to listen freely and even remix and make work from the original work. Drake said the same was going to be the case for what he put out however in typical fashion Ovo/umg has claimed all content that contains any of drakes source material. I’m generally not into this kind of public beef but in basically every regard Kendrick is right and Drake is pretty much the most pure example of everything that is wrong with the music scene today.
As a sysadmin and self-hoster this decision will absolutely make me drop Apple 150%. A clean and well implemented pwa was a big reason I have stuck with my iPhone 12 despite buying a pixel 7. I know there are options on Android but they all have issues either in ux or in ui that makes it very obvious I’m using a pwa.
Pinephone pro had awesome cell coverage. Better than my pixel 4 xl even. Now battery life is a totally different story. I’d last I tried was pretty awful too as phosh wasn’t amazing and plasma mobile would kill itself often. It’s been at least a year since I last used any of it though since I left it 5 states away.
Pine64 has a Quartz64 based compute module that uses the same Pin layout as CM4. I have 2 of them but I was a bit too early on the project last time I tried it. There was no official distro or kernel support at the time but it seems like things have gotten better.
I have always liked and used Duck duck go more than google but now i am considering if i should switch because of the shit they pulled with their app and yesterday when i clicked a link it took me directly to their newsletter subsciption page not even like a popup a proper page without any way except manually backing out . So is...
It’s not a blind trust system with searxng. They have an integrity check in order to be added to the list. This is relative to the searxng GitHub repository which is fully open.
Please can someone show off how smart and sexy they are by answering these questions. I don’t mind if you just link me to a video or guide explaining it (like I’m 5?) instead of typing it out - but please don’t just send me stuff that says something like “To forward to ports correctly, simply forward the correct ports -...
Tons of good responses here. I’m surprised that nobody has brought up Tailscale though. It’s def the easiest vpn solution I have found. It’s got some great documentation and how to projects to get a home lab running and it’s got its own domain system baked in most of it being zero configuration. You can access mullvad vpn exit nodes straight from it, and set up those domains with ssl super easy e.g.
sudo tailscale serve —https=443 localhost:8096
That single command would allow any other devices connected to your Tailscale account to reach your Jellyfin using the domain “{serverhostname}.[tail-scale].ts.net” complete with a private reverse proxy and ssl cert.
There are a few things to click around in tailscale on but it’s a extremely easy to use free application that has made my self hosted life significantly easier due to my system living behind multiple firewalls that I sadly have no control over.
I built my 3D printer a couple of months ago, but I can’t get it to print sharp corners. The corners in the picture should be 90°, without any fillets:...
#2.A direct extruder can help with getting very precise sharp corners but from what I understand it will hurt with accuracy on curves. Also there is the whole fact that there is a motor on top of the hot end so weight and whatnot will hurt speed.
Anyway just check out #1. It should help with your issue. If not that then a feed rate tune would solve any over extrusion problems.
I never got to try the m8 but the htc one m7 was my favorite phone of all time. Such a unique and simple all metal design. Incredible speakers for the time and most importantly it fit perfect in my hand. I really wish they was still around as a phone manufacturer.
No no no no. I love the pinebook pro. But please don’t suggest it to anyone as a newbie hardware choice trying to get anything done. There are so many little quirks on hardware this slow and moreso having to deal with arm repos and all of the incompatible software/workarounds.
A few examples.
If you want to watch YouTube you basically have one browser option. Chromium. Additionally if you want to watch any drm content then you need to install a docker container that runs chromium that has drm enabled.
App images and flatpak software repos are nowhere near complete which can be not great for someone who is just trying to get some work done. Really not great when some devs are exclusively distributing via flatpak.
No virtualization. It just doesn’t have the capability. Sure there are docker containers but that isn’t exactly virtualization.
I love my pinebook. It’s a great machine for just have a very cheap low spec thin client with a decent keyboard and screen but I would never ever recommend it to a newbie.
Thank you for posting this. I gave up on the show a week ago around episode 600. Marineford legitimately felt like they spit in my face and told me my time was worthless with how many cuts of “he’s almost there”. The show looks like it gets interesting again afterwards but Marineford legit just sucked the will out of me to continue watching. I was thinking of looking up a fan edit to just get the cliff notes and this is perfect!
Is there any reason that little silver part of the extruder wouldn’t move and start clicking while printing when printing at 205 in PLA. It seems to turn just fine without any filament in there otherwise....
Check the screw that is imbedded in the brass gear. It holds it in place to the stepper motor it is attached to. If it is loose at all then it will produce similar results to a clog. Also be sure that the screw is aligned to the cutout on the stepper motor axel. That is what keeps it spinning. If it is tightened but not aligned then it will make that skipping sound.
Samsung and the carriers. The easiest way for most people to get a phone is on a carrier plan but surprise surprise. They OEM lock devices so that users can’t swap firmware or root. Doing so would allow them to go to another carrier. As if hanging a lease contract over your head wasn’t enough.
If you don’t purchase from carriers then there are lots of options out there. Fair phone makes a pretty decent phone new phone, pixel is great after you degoogle it. Older one plus phones are generally a steal. If you wanna get really adventurous (test bleeding edge totally free software with no restrictions) there’s the pinephone. Just be warned that one is straight up unusable as a daily driver imo. There are tons of great options if you purchase through channels other than carriers. What just sucks is phones that you would typically buy that would be unlocked are no longer unlocked if your only choice is through a carrier. I even remember a while back some phones would lock their bootloader when you brought your unlocked phone to their network if they sold a equivalent version of the device. I haven’t seen that in nearly 10 years though and I think it had something to do with oversight on manufacturers behalf and poor choice of distribution of firmware.
Guitarix was one of those for me. I know there are better virtual amps on windows but I quite enjoyed guitarix for its open and free nature. Plus audio routing on windows is a nightmare.
Yeah, last time I checked it suggested you just use a live install if you wanted to use it lol. I don’t think it even works in macos despite macos having Macports, quartzx11 and jackctl support.
Netris is an open-source cloud gaming platform with Stadia-like features using Proton (www.gamingonlinux.com)
OpenAI plans to announce Google search competitor on Monday, sources say (www.reuters.com)
Back to the studio! (lemmy.dbzer0.com)
There's no coming back from that (lemmy.world)
He did nothing wrong (lemmy.world)
REMEMBER TO SPREAD THE WORD! THE PLATFORM THAT HAS THE PORN ALWAYS WINS! (lemmynsfw.com)
Start telling people now, over on reddit. BEFORE they start cracking down. That way, everyone will know, and the growth will happen even more rapidly.
Apple is officially dropping iPhone support for web apps in the EU - The Verge (www.theverge.com)
Apple being Apple again. Just why does anyone actually like that company?
The Google messaging update looks bad. It reminded me I purchased textra a while ago. (lemmy.world)
They really didn’t have to redesign a text box. Please stop reinventing the wheel. I don’t need another pop up in my life.
Raspberry Pi is preparing for an IPO in London for likely more than $500M (arstechnica.com)
Any duck duck go alternative that is better in privacy and security ?
I have always liked and used Duck duck go more than google but now i am considering if i should switch because of the shit they pulled with their app and yesterday when i clicked a link it took me directly to their newsletter subsciption page not even like a popup a proper page without any way except manually backing out . So is...
I want to get started with *arr apps - here are all the things I don't understand about (reverse-/)proxies and networking in order to get it set up.
Please can someone show off how smart and sexy they are by answering these questions. I don’t mind if you just link me to a video or guide explaining it (like I’m 5?) instead of typing it out - but please don’t just send me stuff that says something like “To forward to ports correctly, simply forward the correct ports -...
What is causing rounded Corners on my prints? (discuss.tchncs.de)
I built my 3D printer a couple of months ago, but I can’t get it to print sharp corners. The corners in the picture should be 90°, without any fillets:...
Thank you Lemmy! (lemmy.world)
I finally managed to install Lineage os on this HTC One (m8) thanks to the help of Lemmy!
Sideloading won't be enabled where I live (sopuli.xyz)
Linux laptop recommendation thread🐧💻 (lemmy.world)
I’m on the market to buy a new laptop, and Lemmy has successfully coaxed and goaded me to give Linux a serious try....
Your ads dont work here, brand! (lemmy.world)
Trump saying he'll be a dictator only on day 1 is the strategy of normalizing it.
Just make it so normal that people accept it....
Guys!!! It gets good around chapter 1176. (lemmy.world)
Cyberpunk 2077 | Update 2.1 (www.cyberpunk.net)
Update 2.1 for Cyberpunk 2077 and Phantom Liberty on PC, PlayStation 5 and Xbox Series X|S is coming out tomorrow (December 5th) around 12 PM CET....
[SOLVED] Extruder clicking (lemmy.world)
Is there any reason that little silver part of the extruder wouldn’t move and start clicking while printing when printing at 205 in PLA. It seems to turn just fine without any filament in there otherwise....
LineageOS is currently installed on 1.5 million Android devices (9to5google.com)
They’re in no position to complain (lemmy.ml)