This magazine is from a federated server and may be incomplete. Browse more on the original instance.
I have been printing with PETG on glass for a little while now, and have gone through almost an entire roll. Yesterday I had my first print stick so hard that it delaminated the glass :(. I stopped using hairspray as it made the prints not stick at all, and printing bare glass was just fine. But something about yesterdays print...
Some parts reattached in the corners as you can see, i’m assuming because they managed to peel off the fep there down the line....
Probably the most satisfying print so far....
I’m thinking of getting the Bambu Labs P1S, anything that I should be aware of? Anybody got one? Thoughts?
Want to keep your filament dry while you print, but too cheap to shell out for a dry box? Make your own! My house goes through Tidy Cat tubs at a rapid rate, and they seal pretty well. I was using a PVC pipe structure on the inside, but I think these skate bearing roller stands will work better. Throw in a few desiccant...
I’ve been running my Creality CR6 SE (kickstarter edition) for a few years now, and now considering an upgrade to add to the fleet. But I’m way out of the loop on what would be a good robust and reliable option these days. Would love some recommendations on what to look for in a new printer, and maybe which printers the...
Ok, so I know nothing about 3d printing, but since we became empty nester, am looking for a new hobby. My wife us taking up pottery, but thats not for me, and 3d printing seems like a good bit of fun....
Are consumer level 3D printers able to print plastic objects of similar quality to ones produced using injection molding? Or is 3D printing useful mostly for the prototyping stage before a design is finalized and a steel mold is produced for injection molding?
Hi, I’m new to printing. I got myself a Kobra 2 and it was printing fine when I got it. But recently it started to knock the prints off at random times. I have done several recalibrations, adjusted the Z offset up and down. What I have noticed is that all of these models seem to have a small overflow of material which I’m...
Got lazy but have posted once about my Extruder being the reason why Octoprint or Firmware is not starting the Print....
Photo of a 3D printed holder for iPhone 13 mini from its side...
Downloaded from printables.com/…/437536-floating-plastic-ducks.
Right, so at a glance alot of the posts here are for FDM printing, and while I love my Ender 3 and have no problems with it (anymore…) I really want to get into resin printing. I have a 2 year old Elegoo Mars 2 Mono that I’ve used a handful of times, because each time I try to print a test model instead of something that...
Should i worry? Any suggestions for a fix? Didnt find anything because i dont know what search terms to use…...
I created a Lemmy logo keychain for everyone to enjoy!...
Prusa MINI is getting Input Shaper and Pressure Advance! No idea when it’s gonna be released as a stable version, but still quite exciting news for MINI owners (at least I was definitely waiting for Input Shaper)....
“Get ready to leave the virtual world behind, because your analog FPV Rocket League is about to zoom into action, turning your living room into a racetrack of riotous revelry! Who needs digital copies when you can have a rocket-powered extravaganza taking up space, time, and your neighbor’s attention, all while making your...
Normally slopes on my prints look fine, but recently I’ve been getting bad extrusion on some prints but not all. Same materials, same print file. Could this be one of the motors starting to fail? Printed on an ender 3....
Yo guy noob here,...
It’s basically a 10 inch screen matrix for SLA printers, a 130W blacklight lamp from Amazon and a ground glass for even lighting. The lamp gets very hot, so the two fans blow air over and under it (split cooling channel). The parts touching the lamp are printed in Greentec Pro Carbon, electronics box and cooling channel are...
I own the Ender 3 Pro BUT, I have the silent motherboard 32-bit and installed with the firmware: “Ender-3 Pro_HW4.2.7_SW2.0.9.03_SpritExt_H300” because it seems like its the only one meant for the extruder pro kit. It complains that the BL-Touch is not attach to it. I can see it in Octoprint error message and gcode terminal....
