Carboy dryer, stackable, for homebrewing. (OC) (files.catbox.moe)
cross-posted from: lemm.ee/post/31379850...
cross-posted from: lemm.ee/post/31379850...
One of the best things about 3d printing is fixing problems that you and 2 other people have. This box dries the filament I use and the opening strap snapped off within a week. Someone made a knob. 10 min print. Bam. Works again....
cross-posted from: lemm.ee/post/27620066...
cross-posted from: thelemmy.club/post/9213590...
All the sanding blocks I have seen are the nut and bolt type, but i found myself wanting something more of just a … block. No adjusting, loosening, tightening, moving, just wrap your sandpaper around an edge and go. So I spent 15 minutes in FreeCAD and made one. So far it’s working great....
www.thingiverse.com/thing:6394749...
CyberLevel. It’s a digital spirit level for camera operators with a circular touchscreen, some Lemo connectors on the other side and a 1/4-20 thread of the back (aluminum gear set insert, much lighter) . Printed on my 6 years old HyperCube Evolution in CF PETG.
File here. This is almost definitely not the best one that anyone’s designed, but at least it’s a little unique!...
Some holders or adapters I made moons ago.
Design by @canthidium
Swapping out a broken intake manifold and needed to replace my throttle body gasket. Printed in orange TPU because that’s what I had on hand.
Years ago when I was building this CNC machine, I decided to design and print a NEMA23 stepper motor cover to wire the machine neatly. Today, I upgraded the stepper to an servo. All I took was a screwdriver....
My kids broke the flap on one of our sockets, so I had to look into getting them replaced....
Designed an easy to print spool held together by M3 screws. No supports necessary. Master Spool standard....
My kids are both pretty young, but 3D printed odds and ends keep making their way into their toy collection as they inevitably break things. They’re still pretty young, but they’re very interested in the measure -> CAD -> print loop.
Was gifted some old lights that were designed to be stuck into holes in wood. Didn’t want to drill holes that big into my kitchen cabinets, so I designed and printed these holders that can be screwed to the cabinets and hold the lights. Also the lights are surrounded by it, so they don’t glare. Here are the results:...
I wanted to place my new filament dryer directly above my printer, so I designed this shelf. If anyone is interested, files are available for free right here:...