Drudge

@Drudge@lemmy.world

This profile is from a federated server and may be incomplete. Browse more on the original instance.

Drudge,

Haha, how dare I.

Thanks! I don’t have a ton of experience with 3d design, really I’ve only designed keyboards (4 or so) and a few things for the house. The flow series of keyboards was my first stab at using forms in Fusion 360, which was pretty fun.

Drudge,

Could you elaborate on how you set up SABnzbd with yunohost? There’s no app for SABnzbd on yunohost, so did you just install it as you would on ubuntu server? (apt-get install blah blah)

I have jellyfin working and would like to get sonarr operational, but now sure how to get SABnzbd up and going.

Drudge,

Nice…I use Logseq, quite similar.

Drudge,

I’ve always held high hopes (albeit uninformed hopes) for carbon capture… Thanks for the links, looking forward to reading them.

Drudge,

I have to rent out my basement, otherwise I literally couldn’t afford my house plus food for my family of 4 (single income). We’re living pay cheque to pay cheque, so I feel a certain amount of “fuck you” to this (assuming) sarcastic post.

Drudge,

Looks very similar to the style used by Ted Harrison, a well-known painter from the Yukon. Very cool, really like it :-)

Drudge,

The Knowledge Project with Shane Parrish

Drudge,

agh - I miss-clicked on edit and hit delete…I hope this repost doesn’t mess with something or someone. Sorry!

Drudge,

Ok new symptom: the corners of a box that I’m printing are curling up

Drudge,

I forgot that I had a spare glass bed, still in box…I put it on and tried the same print with the same results…the curl!! I tried printing at both 190 and 200 on the head, 55 and 60 on the bed…still the same.

Drudge,

I’ve heard of using gluestick…but dang it sounds messy. Do you have a link to the stuff you tried?

Drudge,

I’ve tried raising and lowering the z-offset…higher just makes it more angry and lower doesn’t get to the point that it fixes it

Drudge,

ok ok, I’ll put the old bed on after I wash it real good…I do this periodically but maybe I was eating chips or something.

Drudge,

Gahhhh same thing… I’m on day 4 of this bs. I’m gonna throw my printer out a window

Drudge,

Someone else mentioned a G10 printing surface. Any idea what’s better for PLA? Or what’s the difference between the two?

Drudge,

I gotta say a big thank you to everyone that responded. Your encouragement for me to take a breather and regroup with a cool head was much needed. Thank you all kind strangers :-)

Drudge,

Usually just got water and soap.

Drudge,

That’s a great article, thanks for the link. I had a suspicion that a ripple texture between lines is an indicator of too low, but it’s good to get that affirmation. I usually do a real-time final cal when it’s printing the skirt (micro up/down)

Drudge,

Thanks for that link. I wouldn’t be surprised if this is my issue. I replaced a nozzle very recently and it seemed to improve things, but it quickly degraded. I also replwced the PTFE tube and likely did it wrong…though the symptoms existed before I replaced the tube. I also have a fan that has been on its way out for a while, so I could be getting heat creep. It could be a combo of all things. Either way, I have new fans on order and will be doing the rebuild. Thanks!

Drudge,

Fantastic, thank you 🙂

  • All
  • Subscribed
  • Moderated
  • Favorites
  • •
  • anitta
  • everett
  • magazineikmin
  • hgfsjryuu7
  • vwfavf
  • mdbf
  • ethstaker
  • Youngstown
  • slotface
  • ngwrru68w68
  • rosin
  • PowerRangers
  • kavyap
  • DreamBathrooms
  • normalnudes
  • khanakhh
  • thenastyranch
  • osvaldo12
  • tacticalgear
  • Durango
  • cubers
  • InstantRegret
  • GTA5RPClips
  • tester
  • cisconetworking
  • modclub
  • Leos
  • provamag3
  • All magazines
    •