I have to rent out my basement, otherwise I literally couldn’t afford my house plus food for my family of 4 (single income). We’re living pay cheque to pay cheque, so I feel a certain amount of “fuck you” to this (assuming) sarcastic post.
Hi folks, I've been working on this keyboard pretty much since January of this year, and I've finally got it to the point that I can call it done! If you'd like to build one, all files are available here....
Old version in the back, new version in the front. Fresh off the printing bed. Haven't tested it yet, but pretty happy on first inspection. Have a few sneaky features. Aiming to release it in a month or so to the community. Using it as an excuse to try out Lemmy :-)...
Hi folks, I’ve had my ender 3 v2 for around 2 years and it’s been trouble-free until lately. Recently, I’ve had major issues with the first layer. I found a few worn components, so I got a dual gear extruder and replaced the nozzle, recald the esteps, bed level and z offset. Nothing I do seems to work....
That’s a great article, thanks for the link. I had a suspicion that a ripple texture between lines is an indicator of too low, but it’s good to get that affirmation. I usually do a real-time final cal when it’s printing the skirt (micro up/down)
Thanks for that link. I wouldn’t be surprised if this is my issue. I replaced a nozzle very recently and it seemed to improve things, but it quickly degraded. I also replwced the PTFE tube and likely did it wrong…though the symptoms existed before I replaced the tube. I also have a fan that has been on its way out for a while, so I could be getting heat creep. It could be a combo of all things. Either way, I have new fans on order and will be doing the rebuild. Thanks!
Hi folks, I’m just getting into this hobby thanks to the posts in this community. So far, I’ve installed Ubuntu server 22.04 on an old laptop and got paperless working, and I’m pretty pumped. Now I would like to access it outside of my home network on my phone....
Could you elaborate on how you set up SABnzbd with yunohost? There’s no app for SABnzbd on yunohost, so did you just install it as you would on ubuntu server? (apt-get install blah blah)
I have jellyfin working and would like to get sonarr operational, but now sure how to get SABnzbd up and going.
Thanks! I don’t have a ton of experience with 3d design, really I’ve only designed keyboards (4 or so) and a few things for the house. The flow series of keyboards was my first stab at using forms in Fusion 360, which was pretty fun.
Hi folks, I have yunohost running with navidrome. I’d like to connect a client to the server on my android phone (Symfonium) but I can’t get it to connect to my navidrome server....
Hi folks, I have yunohost running with navidrome. I’d like to connect a client to the server on my android phone (Symfonium) but I can’t get it to connect to my navidrome server....
Hi folks, I have yunohost up and going on an old Lenovo desktop - works great and was really easy to get operational. Jellyfin is working and I’ve manually dumped in some media to test it out....
No one really understands our struggle (lemmy.world)
What's a good podcast you like?
My personal favourite is Beautiful/Anonymous. Tell me yours.
deleted_by_author
Sucking carbon dioxide out of the sky is moving from science fiction to reality
Occidental Petroleum is investing in billion-dollar projects to suck carbon dioxide out of the sky. The effort is raising hopes — and eyebrows...
flow-MX36 released! (lemmy.world)
Hi folks, I've been working on this keyboard pretty much since January of this year, and I've finally got it to the point that I can call it done! If you'd like to build one, all files are available here....
Amazon Prime Day lowest price great deal!! unless you count last week...or even yesterday...argh...
https://lemmy.world/pictrs/image/c0bcfa47-798d-48af-992f-65ee9cdd88fb.png
whoooo first post in a new community ity! Here's my WIP (lemmy.world)
Old version in the back, new version in the front. Fresh off the printing bed. Haven't tested it yet, but pretty happy on first inspection. Have a few sneaky features. Aiming to release it in a month or so to the community. Using it as an excuse to try out Lemmy :-)...
First layer woes - looking for advice
Hi folks, I’ve had my ender 3 v2 for around 2 years and it’s been trouble-free until lately. Recently, I’ve had major issues with the first layer. I found a few worn components, so I got a dual gear extruder and replaced the nozzle, recald the esteps, bed level and z offset. Nothing I do seems to work....
Finally finished my ice fishing scene! (lemmy.ca)
Acrylics, 24"x36" canvas.
Advice: accessing home network beyond home
Hi folks, I’m just getting into this hobby thanks to the posts in this community. So far, I’ve installed Ubuntu server 22.04 on an old laptop and got paperless working, and I’m pretty pumped. Now I would like to access it outside of my home network on my phone....
Completed my Explorer RxCT build! (lemmy.world)
https://lemmy.world/pictrs/image/bca07918-0ce7-4f9a-a86f-8c2337228ebc.jpeg...
Preeetty sure I found the cause of my under-extrusion woes
https://lemmy.world/pictrs/image/3ba757e2-4bc7-48bd-9335-0008e0b2bac1.png
Got my Drunken Slug account. What else do I need to get started?
Never used Usenet before, so I’m not sure what else I need.
EMK subreddit - is it reopened?
Curious if the subreddit had been reopened? I fully intend to stay on Lemmy, I’ve been having a great time on this platform and new community....
Creatlity sprite drive direct extruder - worth it??
https://lemmy.world/pictrs/image/5c1a6c06-6a94-4675-86c3-613de0d3d894.png...
Daily driver : flow choc40 (lemmy.world)
Hi folks,...
A spider pair in BC, Canada (lemmy.world)
Biggest ones I've seen yet... they were all comfy under an old leaf pile.
yunohost + navidrome --> subsonic client troubles
Hi folks, I have yunohost running with navidrome. I’d like to connect a client to the server on my android phone (Symfonium) but I can’t get it to connect to my navidrome server....
yunohost + navidrome --> subsonic/airsonic client trouble
Hi folks, I have yunohost running with navidrome. I’d like to connect a client to the server on my android phone (Symfonium) but I can’t get it to connect to my navidrome server....
Help: yunohost with usenet
Hi folks, I have yunohost up and going on an old Lenovo desktop - works great and was really easy to get operational. Jellyfin is working and I’ve manually dumped in some media to test it out....