I would highly recommend you do not drain the fuel tank, you should leave it with a full tank to minimize the amount of room for moisture in the air to condense. Too much moisture in your tank can cause it to rust from the inside out if it’s steel.
I wanted a 1/10 scale prerunner with long travel suspension so I decided to make it myself! Designed in OnShape, printed on an Ender 3. I have a bit more info on my thingiverse page. Any other RC hobbyists on here? www.thingiverse.com/thing:6306854
I love this line of filament, never had any problems with it. Used this colour just to use it up on my first test print, it’s not my favourite colour. Looks too much like dry pasta.
Time will tell! I’ve made another person’s design for an RC buggy out of PLA and it has held up fairly well for the most part. Worst case I can try PETG if I have issues.
Okay so flying kites is a very good time. Two line sport kites can be reasonably cheap and easy to learn. You can transition into larger power kites that are a total blast and quite a workout to control. I’ve never done it but you can move up to kiteboarding or similar sports as well.
We can dream right
Rubberband Guns (lemmy.world)
Real French (lemmy.world)
A new-ish, well-maintained vehicle with new tires, fresh oil change etc, if it's left dormant & undriven untouched in a residential driveway for 1 year, will it be driveable after 1 yr?
Canada declares Flipper Zero public enemy No. 1 in car-theft crackdown (arstechnica.com)
Dont wanna scratch that rhinocover (lemmy.world)
Twin I Beam prerunner I'm working on (lemmy.ca)
I wanted a 1/10 scale prerunner with long travel suspension so I decided to make it myself! Designed in OnShape, printed on an Ender 3. I have a bit more info on my thingiverse page. Any other RC hobbyists on here? www.thingiverse.com/thing:6306854
deleted_by_author