@pbl0m@phpc.social
@pbl0m@phpc.social avatar

pbl0m

@pbl0m@phpc.social

developer && custom-nerd, working on ecommerce stuff more than a decade, led & diy lover, 3D printing fan, community guy. I break stuff at SHOPMACHER. (He/Him).

This profile is from a federated server and may be incomplete. Browse more on the original instance.

moira, to random
@moira@mastodon.murkworks.net avatar

this screw sounds like my budgies nattering when they’re happy wtf xD

pbl0m,
@pbl0m@phpc.social avatar

@moira @NewNordicNormal I actually was asking myself if that will survive the first tour 😄 But if you'll replace it with metal you should be all good😉

On the other hand I'm interested if it's possible to print such a part that would work out🤔 Maybe in carbon fiber with a different orientation.

pbl0m, to 3DPrinting German
@pbl0m@phpc.social avatar

First time printing out of a filament dryer. Might be overkill for PETG but hey, it's because I can 😅💁

#3DPrinting #filamentdryer #BecauseICan

pbl0m, to 3DPrinting German
@pbl0m@phpc.social avatar

Got a new toy 😁 it's my first one and I got it in a very nice deal. Looking forward to test this thing.

Does everyone has experience with that model or other types of filament dryers?

beandev, to 3DPrinting German
@beandev@social.tchncs.de avatar

Ich habe mal wieder ein kleines Projekt. Einen 90° Winkel für Abluftrohre von DeLonghi.

Die Frage ist, PLA, PETG oder ABS.

PLA reicht vom Temperaturbereich, schrumpft aber über die Zeit..

PETG ist sehr steif.

ABS über so ein Teil schwer zu drucken.

pbl0m,
@pbl0m@phpc.social avatar

@beandev Ich würde es erstmal in PLA drucken. Ja PLA kann sich über die Zeit verformen, dafür ist das Teil ruck ruck wieder neu gedruckt und getauscht.

Dafür würde ich mir den Stress mit ABS nicht antun. Natürlich unter der Vorraussetzung dass man einfach an das Teil ran kommt um es zu tauschen 😉

pbl0m, to 3DPrinting German
@pbl0m@phpc.social avatar

Well it took quite long but it's a really nice and clean print, even with some broken supports. Will assemble it tomorrow or so and if it sounds good I will print a second one 🤓🔊

Thinking 🤔 about putting a .6mm nozzle in this printer because I will only use this one for larger prints.

Speaker side view with broken supports

pbl0m, to random German
@pbl0m@phpc.social avatar

It's done 🤓💪 let's do a quick recap.

  • Am I to dump to use epoxy and do I had to reseal the subwoofer? Yes 😅
  • Does this thing actually work? Yes✅
  • Does it sound decent? Yes✅, for me at least 🤷
  • Will it replace your 800W THX Home Theater subwoofer? No👎
  • Is it cheap? No👎
  • Is it fun to build? Oh boy, Yes 😅

Resealed subwoofer

DrFerrous, to 3DPrinting
@DrFerrous@hachyderm.io avatar

Overnight print is off to a solid start. I haven't done one this big in a while and I'm excited to see how goes the gradient filament. Also, the estimates for how long this print will take are crazy. Maybe it will still be running at 18:00 tomorrow?? That's not what Cura said. But we shall see!

pbl0m,
@pbl0m@phpc.social avatar

@suvidu @DrFerrous same for me, and if you're using octoprint it's even more worse. Don't know why 🤷

heiglandreas, to random
@heiglandreas@phpc.social avatar

Heut abend gibt's Mac'n'Cheese, Schwaben-Edition

Kässpätzle!

pbl0m,
@pbl0m@phpc.social avatar

@heiglandreas Ich dachte im ersten Moment an Nudeln ohne alles weil du dir den Käse sparen willst 😬

pbl0m, to 3DPrinting German
@pbl0m@phpc.social avatar

My wife asked me if could turn her favorite CD into a lamp? This is what I created in a couple hours of #tinkercad 😁

Free 4 all on printables 🤗

https://www.printables.com/model/851878-cd-retro-lamp-compact-disk-lamp

#3DPrinting #diy #LED #CD #retro

pbl0m,
@pbl0m@phpc.social avatar

@heiglandreas feel free to do so and share your results 😊

pbl0m, to random German
@pbl0m@phpc.social avatar

On may back home from @unkonf and my train is not cancelled until know 🎉 woohoo 🙌

Today was a blast🤩 I was so cool to see so many php-buddies again after such a long time ☺️ This combined with the cool talks and making new connections made my day perfect.

So thx again to all the attendees and organizers.

I'll come back next year and bring my own topic, I promise 😉

pbl0m, to 3DPrinting German
@pbl0m@phpc.social avatar

Sunday is 3DPrintday, so there we go 😎 Let's try the new .6mm nozzle for a nearly full size vasemode print🗑️😬 So far it's working great 😃 Looking forward for the final result 🙌

Trashcan front

pbl0m, to random German
@pbl0m@phpc.social avatar

On my way to tomorrows and my very first train got cancelled 😄 I like the German Railway 🚃 unreliable as usual... at least for me🙈

pbl0m, to fun German
@pbl0m@phpc.social avatar

Currently working on the room of my first son and found this gem😅 Don't know why the previous owner of the house was so lazy but it explains why my metal detector had so strange results as I searched for the wire 😂

pbl0m, to 3DPrinting German
@pbl0m@phpc.social avatar

Found my 3D printed shower 🚿 shelf in my shower this morning 😄 Seems that my super double sided sticky tape does not like massive temperature drop which happens when I open the window during winter time 🤷 Anyhow this showed me that the hexagon infill was to weak, so let's try something else 😉

Shrinked sticky tape

pbl0m, to random German
@pbl0m@phpc.social avatar

Meanwhile in the basement, the Robo Alpaka 🦙🤖 stated in rainbow 🌈 silk

Really looking forward to this model 😁

Sunday is 😎

Slicer View

pbl0m,
@pbl0m@phpc.social avatar

Aaaaand it turned out awesome 🤩🤩

Right view
Rear view

pbl0m,
@pbl0m@phpc.social avatar

@shochdoerfer @movetodevnull
Aye!🦜

pbl0m, to 3DPrinting German
@pbl0m@phpc.social avatar

All done 🤩 My first version of a 3D printed bedside table is ready for release 😁

The table is 36cm x 36cm x 55cm and completely 3D printed in 👉👉vase mode👈👈. Technically no glue is needed cause the single parts interlock but for extra stiffness I'll glue the tabletop parts together 😉

The single parts are designed to fit on an ender 3 size bed and will be released soon on printables 😃

Part of the tabletop
The complete tabletop
The finished table

heiglandreas, to random
@heiglandreas@phpc.social avatar

I just found my old office tea cup again 😁

It's been a while...

pbl0m,
@pbl0m@phpc.social avatar

@heiglandreas thought it could be a NeXT cup 😬

pbl0m, to instagramreality German
@pbl0m@phpc.social avatar

Love this kind of scam/fishing malis😄 For non Germans: This mail advices me to update my user data to reactivate mail "locked" bank account, of cause by clicking the button below 😈

Fun fact, I have no account at this bank 😬

I should call the bank and ask for my hidden account, maybe I'm super duper rich 😂🤑

pbl0m, to esp32 German
@pbl0m@phpc.social avatar

I really like the LILYGO relay product line🤩. An eight port relay board that has a good build quality and just works for under 35€🤯! Has some used their Camera modules 🤔?

https://s.click.aliexpress.com/e/_DeyIKux

pbl0m, to Travel German
@pbl0m@phpc.social avatar

Good morning Barcelona 🤓

Morning coffee

pbl0m, to 3DPrinting German
@pbl0m@phpc.social avatar

From the category: "Is that normal?"

I got my first spool prusament PLA and recognized some interesting behavior. After each print, I have to pull out the filament and snip off 7-8 mm of material cause it inflates during the cool down of the printer inside the extruder.

I know that silk PLA inflates but only outside the nozzle.I thought about heatkreep but this would also happen during the print which does not happen in my case🤔

This only happens with prusament, all others don't🤷

Normal size
Inflated size

pbl0m, to 3DPrinting German
@pbl0m@phpc.social avatar

3D printed filament spool, from recycled filament, for recycled filament 😎 ♻️

I really like this idea 😁 Looking forward for my recycling filament order.

Side view

  • All
  • Subscribed
  • Moderated
  • Favorites
  • •
  • provamag3
  • InstantRegret
  • mdbf
  • ethstaker
  • magazineikmin
  • GTA5RPClips
  • rosin
  • thenastyranch
  • Youngstown
  • osvaldo12
  • slotface
  • khanakhh
  • kavyap
  • DreamBathrooms
  • JUstTest
  • Durango
  • everett
  • cisconetworking
  • Leos
  • normalnudes
  • cubers
  • modclub
  • ngwrru68w68
  • tacticalgear
  • megavids
  • anitta
  • tester
  • lostlight
  • All magazines
    •