mkm_modelwerx, to StarTrek
@mkm_modelwerx@pixelfed.social avatar

Here we go! The first of the Aztec greys has been applied to the G, next up is masking.

mkm_modelwerx, to StarTrek
@mkm_modelwerx@pixelfed.social avatar

This kit stupidly does not include decals for the docking ports, so I created them. I used the decals from the 1/350 refit kit, shrunk them down, changed the name & registry then printed them.

Closeup of the docking port on the secondary hull

mkm_modelwerx, to StarTrek
@mkm_modelwerx@pixelfed.social avatar

Not much in the way of detail painting needing done. Phaser banks painted.

image/jpeg

mkm_modelwerx, to StarTrek
@mkm_modelwerx@pixelfed.social avatar

Blending coat done and I’ve started detail painting.

image/jpeg

mkm_modelwerx, to StarTrek
@mkm_modelwerx@pixelfed.social avatar

Dorsal Aztec/panel paintwork completed. Before I do the blending coat, I’ve got some cleanup to do.

mkm_modelwerx, to StarTrek
@mkm_modelwerx@pixelfed.social avatar

Ventral saucer Aztec paintwork done. Tomorrow I’ll do the dorsal. Time to get some sleep. Good night.

mkm_modelwerx, to StarTrek
@mkm_modelwerx@pixelfed.social avatar

Final round of masking done and 4th light grey applied. Now to remove the masks.

image/jpeg
image/jpeg

mkm_modelwerx, to modeltrains
@mkm_modelwerx@pixelfed.social avatar

Second round of masking done and third light grey applied to the secondary hull and nacelle. I’ll do the final round of masking and final light grey tomorrow. # StarTrek

image/jpeg

mkm_modelwerx, to StarTrek
@mkm_modelwerx@pixelfed.social avatar

First round of masking and second colour done on the secondary hull and nacelle. I covered the saucer as I’ll be using a different method to paint that once I’m done with these parts.

image/jpeg
image/jpeg
image/jpeg

mkm_modelwerx, to StarTrek
@mkm_modelwerx@pixelfed.social avatar

Nacelles and impulse engines painted a lighter grey and masks removed. Will leave for another few days before I mask off those areas.

image/jpeg
image/jpeg

mkm_modelwerx, to StarTrek
@mkm_modelwerx@pixelfed.social avatar

While I wait for the decals to set on the Delta Flyer, back to the G I go. Masked off the dark grey areas on the nacelles and impulse engines so I can paint a lighter grey.

Warp nacelles masked

mkm_modelwerx, to StarTrek
@mkm_modelwerx@pixelfed.social avatar

Got the gloss coat on just before going to bed. Today I’ll be applying the decals then hopefully the final clear coat later this afternoon.

mkm_modelwerx, to StarTrek
@mkm_modelwerx@pixelfed.social avatar

Blending done, detail painting done and more masks removed. Next is cleanup and a gloss coat.

image/jpeg

mkm_modelwerx, to StarTrek
@mkm_modelwerx@pixelfed.social avatar

Second set of masks were put on then the third and final light grey was applied. Next up, removing those masks.

mkm_modelwerx, to StarTrek
@mkm_modelwerx@pixelfed.social avatar

First lot of masking done and second light grey applied. Next up, more masking.

mkm_modelwerx, to StarTrek
@mkm_modelwerx@pixelfed.social avatar

Delta Flyer is now light blocked.

mkm_modelwerx, to StarTrek
@mkm_modelwerx@pixelfed.social avatar

USS Sruthan NCC-1794 powered up and ready to depart.

image/jpeg
image/jpeg
image/jpeg
image/jpeg
image/jpeg
image/jpeg
image/jpeg
image/jpeg
image/jpeg

mkm_modelwerx, to StarTrek
@mkm_modelwerx@pixelfed.social avatar

USS Sruthan NCC-1794 preparing for launch.

image/jpeg
image/jpeg
image/jpeg
image/jpeg
image/jpeg
image/jpeg
image/jpeg
image/jpeg
image/jpeg

mkm_modelwerx, to StarTrek
@mkm_modelwerx@pixelfed.social avatar

And she’s done! Final inspections currently underway. Launching soon!

mkm_modelwerx, to StarTrek
@mkm_modelwerx@pixelfed.social avatar

All the ventral markings, name and registry decals have been applied to NCC-1794. Now for the dorsal decals.

mkm_modelwerx, to StarTrek
@mkm_modelwerx@pixelfed.social avatar

All ventral Aztec decals have now been applied. Will leave them overnight before moving on to the dorsal decals. Really need to start thinking about a name and registry for it.

mkm_modelwerx, to StarTrek
@mkm_modelwerx@pixelfed.social avatar

Glossed up, ready to be dolled up.

mkm_modelwerx, to StarTrek
@mkm_modelwerx@pixelfed.social avatar

Windows masked off on the Delta Flyer, I applied epoxy glue to the cockpit and it’s being held down in place by masking tape instead of clamps. Next up is more gap filling with .

mkm_modelwerx, to StarTrek
@mkm_modelwerx@pixelfed.social avatar

Turned out okay, not great but not bad either. Maybe Revell could consider make this a clear part, it would solve the problem. Anyway, next up is a gloss coat to prepare for decals.

mkm_modelwerx, to StarTrek
@mkm_modelwerx@pixelfed.social avatar

Applied PVA Glue to these areas behind the bridge. Once they’ve set, I’ll paint them transparent blue/green.

  • All
  • Subscribed
  • Moderated
  • Favorites
  • •
  • megavids
  • kavyap
  • DreamBathrooms
  • khanakhh
  • magazineikmin
  • InstantRegret
  • ethstaker
  • thenastyranch
  • Youngstown
  • rosin
  • slotface
  • osvaldo12
  • everett
  • ngwrru68w68
  • JUstTest
  • Durango
  • cubers
  • tester
  • GTA5RPClips
  • modclub
  • mdbf
  • cisconetworking
  • tacticalgear
  • Leos
  • normalnudes
  • anitta
  • provamag3
  • lostlight
  • All magazines
    •