Hopscotch

@Hopscotch@lemmy.ml

This profile is from a federated server and may be incomplete. Browse more on the original instance.

Hopscotch,

I second that about Nvidia GPUs. While Linux hardware support is really good, there is plenty of common, mainstream hardware that never was and never will be supported by Linux, usually due to uncooperative manufacturers. For Nvidia, their non-free driver is terrible and the nouveau driver in Linux is hit-or-miss. (Note, many people use either of those successfully, but the likelihood of success drops rapidly with any of: multiple displays, the need to dynamically change outputs, multi-GPU Optimus hardware or even laptops in general, and fully functional hardware acceleration.)

Has HP printers always been this bad? (sh.itjust.works)

So my mother recently bought an ET-2800, By HP we had an HP printer before and we got a new one because the old one would not work with my sister’s Windows 11 Laptop. So I had to set it up for my mother, the manual said you can use it without the app. But there was no way to physically do that. Anyway, I downloaded the app on...

Hopscotch,

In my experience, printers in general are terrible, but HP LasetJet Enterprise m series printers are excellent.

Are there any applications that can turn an old smart phone into a wildlife/security camera?

Have been thinking about this for a couple years. I have old phones kicking around. Battery shot, hardware dated, but the camera(s) and mic and antennas still work. Would be cool if there were a way to set them up (powered) to stream audio/video or even take stills at intervals (or motion-activated) and then sync the content to...

Hopscotch,

It’s not exactly what you’re wanting, but there is Remote Video Camera on F-Droid.

If I were doing it, I would look for an app that just implements the same basic functionality as a network-connected camera. Then video storage, alerting, motion detection, etc. would all be handled by something like zoneminder.

deleted_by_moderator

  • Loading...
  • Hopscotch,

    I believe hydrocarbon fuels produce water (vapor) as a combustion byproduct, so LPG or natural gas could certainly contribute to humidity levels in some cases.

    There may also be a separate effect by which the heat strips in an electric furnace dry out the air versus the heat exchanger in a gas furnace, but I don’t know about that.

    Hopscotch,

    Dude, you don’t just pump the combustion result through your house.

    I wrote “LPG or natural gas could certainly contribute to humidity levels in some cases,” and was thinking specifically of non-vented gas heaters, which are very common in my experience, and are in some cases used for whole-house heating where there isn’t a central air circulation system. In this case, the combustion result is literally released into the house.

    While this thread is about gas heating, the article is about gas cooking stoves, which in most cases can be vented only at most very poorly (with a range hood), so the risk being dicussed is literally a result of releasing the combustion result into your house.

    Hopscotch,

    By not using it.

    Seriously though, F-Droid (a Play Store alternative) has a lot of nice apps.

    Hopscotch,

    Obtainium looks interesting; thanks for sharing. I wonder about the security implications.

    Hopscotch,

    Yes, Aurora Store works alright for that

    Hopscotch,

    I assume you are referring to the behavior when F-Droid has limited permissions with regard to app installation (but maybe you’re referring to something else):

    If F-Droid is included as part of the system, such as with CalyxOS, as a system app, or with the F-Droid privileged extension (if that’s still offered), then the app updating/installation behavior is a lot more like what Play Store has.

    Did we kill Linux's killer feature?

    A few years ago we were able to upgrade everything (OS and Apps) using a single command. I remember this was something we boasted about when talking to Windows and Mac fans. It was such an amazing feature. Something that users of proprietary systems hadn’t even heard about. We had this on desktops before things like Apple’s...

    Hopscotch,

    A hook is a mechanism for adding functionality at a certain point in a program’s normal flow. As a simple example, imagine a program that works by doing three things in order. It could have hooks that allow the user to add actions before or after any individual steps. Each possible point in the flow is a separate hook. One way to implement it is with a directory for each hook in the program’s configuration directory, where executables can be placed; the hook runs each executable in sorted order.

    I didn’t look up any of this, so it may not be the best explanation, but I hope it is helpful.

    Hopscotch,

    [Can] a patch can kind of be like a hook?

    In the free software world, a patch usually describes a file that lists lines to be added to or removed from another file (or multiple files). The most common use for this is probably with actual source code.

    Binary (non-text) patches are also possible, and in Windows a software bug-fix “patch” would likely be mostly binary. In the free software world, it’s uncommon to use binary patches for updates; instead the source is patched (either in the main upstream project or by a distribution) and a new binary package is built and published.

    Where you create a config file that has symlinks to all the executables like you mentioned?

    I don’t really understand how those two questions relate, so I may not be able to give you a good answer. Often a configuration file has a variable=value structure, but it would certainly possible to have a list of file paths in a configuration. However, this might instead be implemented as an actual directory (like ~/.config/app/pre-hook.d/) where each executable file in that directory is executed by the “pre” hook in the app. (Configuration directories often work very similarly also.)

    Whether the paths are symlinks is likely to be irrelevant, as this is more a filesystem level feature that would often be ignored entirely by the application.

    I hope this is helpful.

    Hopscotch,

    From the README at the current published commit:

    The current focus is on implementing next-word suggestions, which has become complicated/hit a snag and is taking more time than originally planned. Updates will come when this issue is resolved. Thank you for being patient.

    Prior to this, releases occurred quite regularly.

    Hopscotch,

    Bad headline. She was not actually attacked by either one.

    Hopscotch,

    Wouldn’t it be far better to compare fuel cost per mile ($/mile)? This graphic seems useless to me. Maybe I’m missing something.

    Hopscotch,

    Matrix doesn’t require you to set up a server.

    Hopscotch, (edited )

    Yes, and it is very annoying. However it does not seem to be happening now with Jerboa 0.0.42.

    Edit: This is still happening for me too, as of Jerboa 0.0.42, with the AOSP keyboard. It does not happen in any other apps.

    Hopscotch,

    Thanks for posting the GitHub link.

    Hopscotch,

    @whatever and @Flyswat, you’re right, it still happens with Jerboa 0.0.42. I didn’t realize the behavior was related to the specific keyboard in use.

    Is Google having a total breakdown right now???

    So, I’m sure we all know about the WEI thing at this point, which is bad and weird enough; and also the sudden move to block ad-blockers on YouTube. I don’t know how that’s going to work out, but it’s pretty irritating. Not to mention, going to the gym, coming home, and suddenly getting loads of fitness-related ads piled...

    Hopscotch,

    Is that from Hitchhiker’s Guide to the Galaxy by Douglas Adams?

    Hopscotch,

    Just FYI, Signal (Open Whisper Systems) is not FOSS-friendly. The server-side software is not open source, they refuse to federate with other Signal implementations, and they are unfriendly to forks. See:

    Hopscotch,

    I recommend using Molly instead if you need to communicate with Signal users. Note, the Molly-FOSS flavor excludes proprietary Google libraries entirely.

    If you are interested in trying an alternative that is unrelated to Signal, I suggest looking at SimpleX Chat.

    Hopscotch,

    If you haven’t already, check for Nouveau support. And if your card is supported, you may need a kernel parameter. I needed nouveau.config=NvClkMode=15 (but be warned some parameters like that have some risk, like possibility of overheating, and may or may not be applicable or safe for your GPU).

    For me, it has worked to just set environment variable DRI_PRIME=1 to use the Nvidia GPU for that specific application. (Maybe this is what Bumblebee does; I don’t know.)

    In the future, though, I recommend avoiding Nvidia hardware.

    Hopscotch,

    It’s ironic but unsurprising, and my experience too, that some functionality works better with Nouveau than with the proprietary Nvidia drivers.

  • All
  • Subscribed
  • Moderated
  • Favorites
  • JUstTest
  • tacticalgear
  • thenastyranch
  • ngwrru68w68
  • magazineikmin
  • khanakhh
  • rosin
  • mdbf
  • Youngstown
  • slotface
  • everett
  • cisconetworking
  • kavyap
  • DreamBathrooms
  • anitta
  • InstantRegret
  • Durango
  • osvaldo12
  • ethstaker
  • modclub
  • GTA5RPClips
  • Leos
  • cubers
  • tester
  • normalnudes
  • megavids
  • provamag3
  • lostlight
  • All magazines