Don’t think I’ve seen this before. Don’t even think the author has things for sale from what I can tell. Couldn’t find an obvious option on any of my models to toggle this either....
Had this happen as well with the GR86 trunk handle file that’s on there as well. I made a make, tried to mark it as such, but was given the same error. Like with your case, the creator doesn’t have an option for purchase/support.
Painful? As a veteran souls player, I had a ton of fun watching them play. I had both streams opened while they were streaming, I was excited to watch them do so well.
So far for me it’s Konosuba and Dungeon Meshi. I’ve already read Mushoku Tensei and I don’t think I can stomach watching it animated, but I haven’t really heard much about any of the other new releases.
As a light novel reader, they did an amazing job with Eighty Six. I could not be happier with it, the only thing about the anime I don’t like is that they never gave it a season 2.
I really want to see my favorite character animated.
He’s the creepy little shit from My Hero Academia. A character so horny that no “horny jail” would be able to contain him. He was always trying to molest or sexually abuse every female character he came across.
Like at one point, the main character rescued a very young girl (Eri) from a criminal organization that was emotionally and physically (non-sexual) abusing her. The live-in school that the characters go to accepted Eri so that they could give her a better living environment and take care of her.
The literal first words Mineta said to her were “Hi, my name’s Mineta, and I can’t wait to see what you look like when you grow up.”
I’ve tried to report the issue to Prusa support but they keeps trying to diagnose it as user error. But at this point I’m at a loss and presume that it’s either a firmware issue or a sensor issue on my unit....
The printer won’t do any leveling with a fully heated nozzle.
The MK4’s we use at work and my personal MK4 all heat up to 170 before bed leveling, and if you previously swapped filaments before leveling, the printer will pause and wait until the nozzle has cooled down to the target range before initiating bed leveling.
I think one of the aspects I like most about 3D printing is the ability for anyone to generate what I like to call a Very Specific Object, which is an item with a purpose so niche it’s a near certainty no one but the author would ever have a use for it. Ergo, it’s an item that by definition doesn’t exist, or rather...
My first VSO was a clip for this garnish/trim for some blinds my mom had. Due to the way the blinds fit in this specific window, my mom couldn’t use the factory hardware to fix the garnish to the blinds, so for the longest time she was using adhesives which would fail over time. One day (shortly before my printer arrived) the garnish fell again and almost hit my cat, my mom expressed frustration over it, and over how she would have to go by more adhesives. I reminded her that I’m getting a printer, I could just make something that would mount it permanently.
My second one was two mounts for my IKEA lack enclosure. I wanted to make a Nevermore filter, so I needed a power supply. Thanks to working at an electronics lab, I managed to score the power supply from a server rack PC. It’s absolute overkill for this, but it came out looking pretty clean, even modeled in a mounting hole for a simple toggle switch so I can activate the power supply without having to plug/unplug the unit.
Hey guys, I work at a lab that has a small print farm. We recently had to get a supply of 2.5kg ESD filament as our vendor didn’t have the usual 1kg spools in stock. The problem is these new spools are massive, and our filament dryers are nowhere near big enough to accommodate them....
My boss and I discussed that, he’d rather not have to pay the labor to have us respool the filament when we could just drop it into a dryer.
But I’ll show this to him, he may be open to the idea if it speeds up the process. Only potential problem is this ESD PLA filament is pretty brittle, I don’t know how it will enjoy respooling.
We have access to a decent amount of tools at the lab, it’s definitely feasible. We tossed around the idea, and honestly I may prefer that to a food dehydrator as all of the dehydrators I’ve seen have a cut off timer whereas the filament dryers we have can be run indefinitely.
I’ll have to pitch that to my boss and see what he thinks. I’ve seen some people convert some water proof/resistant totes from Target to become filament dryers.
Yeah, this stuff is already pretty brittle to start with, but once it’s been out in the air for a day or two it becomes even more brittle. You can easily snap it with the slightest effort.
It’s pretty tedious to work with, but we have to use it.
I used to do car electronics installs for a living. The amount of firearms I’d find was staggering.
Many times where we needed to get to/behind the glovebox, or remove the center console (which usually requires pulling every item being stored in it before removal), and we’d just find the handgun sitting right there. Had one where the client dropped off their vehicle and the gun was laying right on the floorboard.
Not firearm related, but I had a little old lady come in one time, wanted to get a radio done. Went to remove her center console so we could install an aftermarket USB in the factory USB location (adapter didn’t work with carplay too well) and I found a rusted ice pick in the center console. She was definitely ready to make someone’s day worse.
How tf is it possible that there is no quality selector on tv app but there is one on pc and mobile. Why is it that on tv crunchyroll buffers so much ( and i checked my internet connection was fine ). Why tf there is still so many region locked content. I want to watch legend of galactic Heroes and not play games wondering which...
There’s also HiDive (in the US), they don’t have nearly as big of a catalog as CR, but they do have some pretty big exclusives that are only on their platform.
Honestly surprised to see Dark Gathering make it up here. I’ve been enjoying it a lot in spite of the MC, past several episodes went to some dark places and I was all about it.
It’s a pain in the ass to set up and navigate, but I use Solidworks for hobbyists. It’s $99/yr and it gets the job done for me. Since I use Solidworks at work, it’s nice to have the same software for home so I don’t have to worry about learning to navigate another CAD software.
I tried FreeCAD as well, and it’s what pushed me to try the Solidworks subscription.
Printable make posting locked behind purchase? (lemmy.world)
Don’t think I’ve seen this before. Don’t even think the author has things for sale from what I can tell. Couldn’t find an obvious option on any of my models to toggle this either....
In 1 hour, Gura and Fauna are "racing" in Dark Souls: Remastered (youtu.be)
Racing = speed running certain things? Apparently there'll be a list of things during the stream(s)....
[DISC] Sousou no Frieren - Ch. 130 (mangadex.org)
What are y'all watching this season?
So far for me it’s Konosuba and Dungeon Meshi. I’ve already read Mushoku Tensei and I don’t think I can stomach watching it animated, but I haven’t really heard much about any of the other new releases.
18+ Holo is back! (shota.nu)
May the Wise Wolf bless you!
beat up that brat (lemmy.world)
I could have sworn that this template existed but I couldn’t find it. So I grabbed the screenshots and made it myself. Enjoy!...
Word of warning to those with Prusa MK4 and Satin beds. There is a chance that the auto bed leveler will mess up and destroy your print surface. (lemmy.world)
I’ve tried to report the issue to Prusa support but they keeps trying to diagnose it as user error. But at this point I’m at a loss and presume that it’s either a firmware issue or a sensor issue on my unit....
VSO! Ikea Drawer Stopper Fix (lemmy.world)
I think one of the aspects I like most about 3D printing is the ability for anyone to generate what I like to call a Very Specific Object, which is an item with a purpose so niche it’s a near certainty no one but the author would ever have a use for it. Ergo, it’s an item that by definition doesn’t exist, or rather...
Need help finding a large dehydrator
Hey guys, I work at a lab that has a small print farm. We recently had to get a supply of 2.5kg ESD filament as our vendor didn’t have the usual 1kg spools in stock. The problem is these new spools are massive, and our filament dryers are nowhere near big enough to accommodate them....
Top 10 Anime of the Week #09 - Fall 2023 (Anime Corner) (lemmy.world)
How does she know... (lemmy.ca)
deleted_by_moderator
Rant on crunchyroll
How tf is it possible that there is no quality selector on tv app but there is one on pc and mobile. Why is it that on tv crunchyroll buffers so much ( and i checked my internet connection was fine ). Why tf there is still so many region locked content. I want to watch legend of galactic Heroes and not play games wondering which...
i’m living in a school with gamblers (lemmy.world)
Top 10 Anime of the Week #07 - Fall 2023 (Anime Corner) (lemmy.world)
Kusuriya no Hitorigoto • The Apothecary Diaries - Episode 7 discussion (ani.social)
Post bad/mediocre anime with good openings (lemmy.world)
Dot Hack Sign is a mid, but it’s opening is great. Obsession by See-Saw.
Fusion360 free Startup option is going away! (pages.autodesk.com)
They offer a discount $150 for 3 years the $680 full price. 😞 it was bound to happen.
SoL (lemmy.dbzer0.com)