@Machinist@lemmy.world avatar

Machinist

@Machinist@lemmy.world

This profile is from a federated server and may be incomplete. Browse more on the original instance.

Machinist,
@Machinist@lemmy.world avatar

I’ve used this app for years. It’s pretty great. You can slow the animation and move forward and reverse through tricky parts of the knots. I have the Arbor Knot, the Orvis Knot favorited for fishing. I also use the Adjustable Grip Hitch for adult type stuff, it’s magic.

Machinist,
@Machinist@lemmy.world avatar

Am not.

Machinist,
@Machinist@lemmy.world avatar

No worries. 👍

Does 'zombie deer disease' pose risks for humans? (www.bbc.com)

Chronic wasting disease, or CWD, is a type of prion disease, according to the Centers for Disease Control and Prevention in the United States. It’s a neurodegenerative condition that infects wildlife, including deer. It has most recently been confirmed in deer, as well as moose in Canada, after previous cases were reported in...

Machinist,
@Machinist@lemmy.world avatar

IIRC, I read that it may have a longer asymptomatic period than mad cow does in humans. Which is spooky. They have been able to infect primates with it.

I’ll be getting my venison tested before we consume any.

Wish there was a DIY way to test. Looked into it a little but couldn’t find the protocol used for testing.

Machinist,
@Machinist@lemmy.world avatar

The majority of pumps in my area play ads. Some of the pumps can’t be muted. For those, press the top left and right buttons, then next two down, then the next two and it throws it into maintenance mode. That shuts off the speaker.

Machinist,
@Machinist@lemmy.world avatar

Was it Friends? “The One With the Dirty Girl.” Ross is dating Rebecca Romijin and her apartment is absolutely trashed?

Appeals Court Bails Trump Out of Having to Post Massive Fraud Bond (www.rollingstone.com)

Donald Trump was supposed to have to post a $464 million bond by Monday or else the state of New York could begin collecting on the massive civil fraud judgment leveled against him earlier this year. An appeals court bailed him out, blocking collection of the judgment and giving the former president 10 days to post a drastically...

Machinist, (edited )
@Machinist@lemmy.world avatar

Damn. I was really hoping this would be a ray of light for the next year and a reduction in the level of election insanity we’re going to see.

Instead, just more fuel for the flames.

Machinist, (edited )
@Machinist@lemmy.world avatar

7-way kit is ETBC7 from etrailer. Breakers included are Pollak PK54230 and PK54240. These are thermal overload breakers and typical of 12V auto reset breakers. They get hot and a bimetallic strip flips up breaking the circuit.

These breakers are used instead of a fuse. That’s why I’m thinking of using manual reset.

I can just see them ticking away if there was an unattended short.

Edit: Also, the instructions on that ETBC7 kit include grounding directly to the battery. I assume, since so many people suck at electrical, that’s the safest way to ensure there is a proper ground. I’ll be making my own good ground somewhere with bare metal.

Machinist,
@Machinist@lemmy.world avatar

Hmm. So you strongly recommend wiring to the battery and using the auto reset breakers as the risk of brake failure is greater than an unattended short.

I’m just a jack at auto repair and electronics and haven’t dealt with trailers since I was a kid on the farm. If you don’t mind me asking, what is your experience with trailers and such?

Machinist,
@Machinist@lemmy.world avatar

In case of a fused breaker?

Machinist,
@Machinist@lemmy.world avatar

I’m very much a RTFM guy myself. So much so that I’m getting a front plate that says RTFM. It always amazes me when people kill good equipment through lack of easy maintenance that is clear in the documentation or can’t solve a simple problem because they didn’t look at the instructions. My career is now based on my ability to implement what the instructions say (thus the plate).

I don’t always follow the instructions; but I damn well know when I’m violating them, and why, as well as assessing the risks as best I can. That’s why I’m asking: the instructions didn’t make sense to me but I’m not an electrician or automotive engineer.

I’m real picky about my truck. It has a few dents and paint chips but is pretty cherry. 190k miles. It just got a clean bill of health from a trans shop and I had them add a trans cooler. About to replace plugs, wires. Doing my own hitch install because I don’t trust most shops to drill my frame or torque correctly. Also going to try and find an oil leak. Getting a few drops a day. Hope it’s something simple.

My truck has only surface rust as it has never been on salted roads. I’ve got a 500watt amp under the seat grounded to the cab and I downgraded the fuse to 30amps because it didn’t need the 50watt or whatever it was the kit came with.

My gut says that running the ground to the battery and using an auto reset breaker are a bad idea. However, my gut can be wrong and I’ll ground to the battery and use the auto reset breakers.

Thank you very much for the advice!

Machinist,
@Machinist@lemmy.world avatar

I will do so. Thanks!

Machinist,
@Machinist@lemmy.world avatar

That’s a pretty good idea. I’ve got Maxi fuses in 40 and 50amp values. Maxis are slow blow, IIRC. May do this.

Machinist,
@Machinist@lemmy.world avatar

We’ve been saving since 2020, saw the writing on the wall then. We’re moving this summer.

Can’t afford to leave the country but at least we can get out of the South.

It was a hard decision. All I’ve ever known. I’m going to miss a lot of things. Especially the land and water.

I feel like I’ve lost my people. I don’t trust people that look like me and talk like me. It makes me sad. It makes me angry when they think I’m like them and say hateful things about other different people.

I keep my mouth shut and we keep to ourselves as much as possible. We’ll be out of here soon.

Machinist,
@Machinist@lemmy.world avatar

I had to stop watching it for the same reason.

Machinist,
@Machinist@lemmy.world avatar

I appreciate the kind words.

My wife is WFH. I’ve been working on building a manufacturing consulting and CNC programming business. Want to buy a small mill, can probably make good money just picking up odd jobs. These days I call myself a manufacturing consultant, but I’m really just an aerospace machinist.

We’ve literally been planning this move since 2020 when everyone around us lost their fucking minds. We’re hoping we have enough saved to get a mortgage on a small play farm.

Machinist,
@Machinist@lemmy.world avatar

I would call it an offset round rasp. Probably belonged to a pattern maker or a fine woodworker. Can’t find an exact match, might be a Heller rasp.

Machinist,
@Machinist@lemmy.world avatar

We both mostly work from home and she likes clicky keys, so blues are not a problem.

Machinist,
@Machinist@lemmy.world avatar

Star Trek: 25th Anniversary on DOS and Gameboy. DOS version was superior even though my mother threw away the manual in a move. I had to figure out the system locations by randomly going to all of them.

Machinist,
@Machinist@lemmy.world avatar

For your old man’s sake, have a plan. Have a go-bag, include SS card and birth certificate. Try and keep your vehicle 3/4 full. Chances are, you will have time to run to a safe state on one of the coasts. Pre-plan two routes, one for back roads and the other for highways and interstates, print it out. If you can, keep a minimum of $500 on hand and more like $1-2k.

I strongly recommend a handgun, take it to the range and practice enough to be proficient loading and shooting at 7 yards. A single woman is usually welcomed at ranges. Just don’t talk politics and if anyone asks, you’ve got a bad ex-husband. The more straight you appear, the easier it will be.

Sorry for the unsolicited advice/novel. Stay safe.

Machinist,
@Machinist@lemmy.world avatar

Dang, you’re in about as good a place as you can be then.

I hope I’m just an alarmist old fart. If so, my family ends up with a better life anyhow.

  • All
  • Subscribed
  • Moderated
  • Favorites
  • megavids
  • kavyap
  • DreamBathrooms
  • thenastyranch
  • magazineikmin
  • InstantRegret
  • GTA5RPClips
  • Youngstown
  • everett
  • slotface
  • rosin
  • osvaldo12
  • mdbf
  • ngwrru68w68
  • JUstTest
  • cubers
  • modclub
  • normalnudes
  • tester
  • khanakhh
  • Durango
  • ethstaker
  • tacticalgear
  • Leos
  • provamag3
  • anitta
  • cisconetworking
  • lostlight
  • All magazines