That’s not what the story is here - this is an additional fund raising entity to support the independence of the platform. The post is very clear that Mastodon (the project) remains a European organisation
However, it’s also important for us that Mastodon is one of the few, if not the only social media platform that operates out of the EU, and we would like to keep it that way.
I upgraded two Prusa MK3s to MK3.9, and ended up with a couple of spare boards, stepper motors and a bunch of other things. So I decided to turn them into a Makelangelo clone!...
I think forcing all posts to be opted-in to the search, and depending on users to opt-out, would be far more controversial? Either way, the user does get to control this within the platform.
At the moment it is explicitly designed as a single-user implementation, although I’m sure it could be pivoted to become multiuser. I’ve simply set up my own on Glitch and it is working great! -> pipesmarks.glitch.me
I do not know if it is on the Fedora roadmap, but I can recommend taking a listen to the most recent episode of Linux Matters, where the three hosts talked a lot about backup strategies, and also mentioned GUIs.
Tuesday, Tuesday. Up here in Scotland (specifically Edinburgh) it’s the last day of the school holidays. To any other parents north of the border - we’ve done it, folks. The end is in sight. Looking forward to tomorrow’s hectic early morning followed by a day of bliss....
Oh, and listening to Messy, the new album from Cindy Alexander. She did a super intimate (audience of 3, me being one of them) livecast the other night, it was really nice.
Also: they remastered the Lush albums? I’ll have to check that out.
I’ve always contemplated designing my own printer but I didn’t know how to until I learned CAD, was quite the journey and I learned a lot (still a lot to learn) but I had a lot of fun designing it!
I’m often seeing links to posts on Mastodon and, when I click on them, they open in a Mastodon instance different from mine (I mean from the one where I have my account). This means that I cannot reply, boost, etc, that post....
Yeah, the decimation in the low poly app was particularly aggressive around the mouth! The original scan of course was not a huge resolution, and I had glasses on which was a mistake. Came out ok for my vanity purposes though :-)
Twitter is threatening to sue Meta over concerns about its new Threads app, according to a letter obtained by Semafor. In the letter, which is addressed to Meta CEO Mark Zuckerberg, Twitter lawyer Alex Spiro argues that Meta used Twitter’s trade secrets and intellectual property to build Threads....
I saw Teppi Tree but tbh I blew off all my money buying the printer and the filament and so that’s not an option. So far I found cool uploads of connect 4, battleship, ultimate tic tac toe, and a couple games I haven’t heard of. Feel free to let me know your thoughts below.
GoToSocial is a new ActivityPub social network server for the Fediverse (github.com)
cross-posted from: beehaw.org/post/13437780...
Mastodon forms new U.S. non-profit (blog.joinmastodon.org)
Made a polargraph with leftover parts from a Prusa i3 MK3.9 upgrade (lemmy.ca)
I upgraded two Prusa MK3s to MK3.9, and ended up with a couple of spare boards, stepper motors and a bunch of other things. So I decided to turn them into a Makelangelo clone!...
Fediverse Developer Network | Announcement: Online meeting on March 7, 2024, focused on FediTest (fedidevs.org)
Hey all - Johannes Ernst and I are going to get the Fedidevs meetups going again, starting next Thursday March 7....
Mastodon 4.2 released, with (opt-in) search, and UX improvements (blog.joinmastodon.org)
Lots of small improvements across the user experience, and opt-in search, make this an important release.
With Postmarks, social bookmarking is back -- but this time it's built on the fediverse | TechCrunch (techcrunch.com)
open source app
can anyone recommend a good list of open source apps please ? like one of everything , youtube , translator, dictionary , office , maps , all sorts
Fedora really needs a backup tool
Hi everyone,...
TV and Tunes Tuesday!
Tuesday, Tuesday. Up here in Scotland (specifically Edinburgh) it’s the last day of the school holidays. To any other parents north of the border - we’ve done it, folks. The end is in sight. Looking forward to tomorrow’s hectic early morning followed by a day of bliss....
Brachiograph: DIY Pen Plotter For $15? (www.brachiograph.art)
My first own-designed printer (lemmy.world)
I’ve always contemplated designing my own printer but I didn’t know how to until I learned CAD, was quite the journey and I learned a lot (still a lot to learn) but I had a lot of fun designing it!
How to see posts from another Mastodon instance in a smooth way in one's own instance? (lemmy.ca)
I’m often seeing links to posts on Mastodon and, when I click on them, they open in a Mastodon instance different from mine (I mean from the one where I have my account). This means that I cannot reply, boost, etc, that post....
Just finished my Prusacaster (lemmy.world)
Now I need to learn how to play it…
A 3D print, 8 years in the making (andypiper.co.uk)
Printed an 8 year old hacked Kinect 3D scan of myself, now I finally have a printer to do it!
Twitter warns it could sue Meta over “copycat” Threads app (www.theverge.com)
Twitter is threatening to sue Meta over concerns about its new Threads app, according to a letter obtained by Semafor. In the letter, which is addressed to Meta CEO Mark Zuckerberg, Twitter lawyer Alex Spiro argues that Meta used Twitter’s trade secrets and intellectual property to build Threads....
Any Cool Games To 3D Print?
I saw Teppi Tree but tbh I blew off all my money buying the printer and the filament and so that’s not an option. So far I found cool uploads of connect 4, battleship, ultimate tic tac toe, and a couple games I haven’t heard of. Feel free to let me know your thoughts below.
Why is the community icon the OSHW logo?
I assume the community is using the Open Source Hardware Logo as it looks technical?
van_dam - A self-hosted digital asset manager for 3d print files (github.com)