It might be an issue with concentricity. If the nozzle is not perfectly centered it creates a step that the filament can snag on. It can then cause the already softened filament to bunch up during deretraction forming a plug in the heat break. I had this issue with cheap nozzles. Everything starts fine and after a few layers it all stops for apparently no reason. Cranking up the heat makes it better for a bit, before making it worse
Generally I would agree, and give them the benefit of the doubt, but it smells too fishy. A lot of goodwill was pumped up during testflight, but went dead very soon after money got involved, almost a full 180 and with barely a word afterwards. For all intents and purposes they still took the money and ran
Thanks! I’m in Belgium, so location recommandations are welcome, too. The 70x100 frames I found so far are frightfully expensive. It feels ord to spend more on the frame than the art it contains. That said, I would spend the money rather than doing the print the disservice of housing it in a cheap looking frame
I am skeptical and don’t expect much. At this point I have all but written off my lifetime membership. In retrospect, it was rather suspicious how quickly went from TestFlight to full release. Communication was almost insulting. Shit happens, but informing as setbacks happen (however brief) garners so much more goodwill than going silent and then posting an apology, especially if you let someone else do it and even more so right after starting to charge for features that were previously free on an app that while looking polished had serious issues with stability and memory leaks
Regardless of the circumstances and events, this way of doing things completely destroys credibility and trust in the future of the product and the developer.
I really want it to succeed and hope the developer really puts in sufficient remedial action to somewhat mend the damage done, but at this point I am not holding much hope for little more than the bare minimum, if anything
Patrick Vallance, who was the government’s chief scientific adviser during COVID, made a note in his diary on October 25, 2020, about a meeting involving then Prime Minister Boris Johnson and Sunak, who was finance minister....
For the past few days the app has been randomly freezing up and crashing after some time up to minutes, but more often requiring a force quit. No real trend. Happens both while scrolling the feed, scrolling comments or opening links without a clear trigger. iPhone 11 on ios 16.6
I’m sure huffpost knew what they’re implying. In truth he’s vowing to continue his presidential run from prison if necessary. The headline on their actual article is clearer: “Trump Vows To Run For President From Prison If Convicted”
It however does not have issues maintaining the temperature when it’s not actually printing. I can set my hotend to 215 before beggining my print and it’s happy to sit there....
That looks like a failing thermistor or heater cartridge. You might want to swap out both the thermistor and the heater cartridge at the same time. Had something similar happen to me and it turned out the failure of the one, likely influenced the other to wear out prematurely. The cartridge wasn’t exactly broken, but seemed to have a less consistent response curve. You can test them separately, but they are cheap enough that it is not worth the hassle
[Troubleshooting] Clog Guy is back, and things have completely ceased making sense.
Hi guys. Please check my previous post for any background questions, I don’t have it in me to go over everything again....
title
Bean is toast (wearecocoon.co.uk)
Now that wearecocoon.co.uk is officially out of business (subpages are still working) did anybody try to get a refund in the App Store?...
"Carbon Based Lifeform" [OC] (lemmy.world)
Hand carved/hand printed linocut [edit : that i made] 70x100cm, gold & black version. Scifi inspired work
What are your thoughts on photosynthesis ?
I mean no offense to anyone. I just wanted to know your thoughts on it.
These cows have earmuffs, your argument is invalid (lemmy.world)
Captain guinea pig at your service (i.redd.it)
OC Challenge accepted
Some business leaders like Jeff Bezos hate the phrase 'work-life balance.' Here's what they prefer instead. (www.businessinsider.com)
Do you really think we will see an update this week?
Rishi Sunak Reportedly Said "It Was Okay To Just Let People Die" Rather than Impose a Second Lockdown, Covid Inquiry Hears (www.ndtv.com)
Patrick Vallance, who was the government’s chief scientific adviser during COVID, made a note in his diary on October 25, 2020, about a meeting involving then Prime Minister Boris Johnson and Sunak, who was finance minister....
Randomly freezing up
For the past few days the app has been randomly freezing up and crashing after some time up to minutes, but more often requiring a force quit. No real trend. Happens both while scrolling the feed, scrolling comments or opening links without a clear trigger. iPhone 11 on ios 16.6
Headline appears to read: Trump vows to go on the lam if convicted (lemmy.world)
I’m sure huffpost knew what they’re implying. In truth he’s vowing to continue his presidential run from prison if necessary. The headline on their actual article is clearer: “Trump Vows To Run For President From Prison If Convicted”
New to 3d printing, my ender 3 is having problems with thermal runaway and doesn't seem to be able to keep a consistent temperature when I begin printing. (lemmy.world)
It however does not have issues maintaining the temperature when it’s not actually printing. I can set my hotend to 215 before beggining my print and it’s happy to sit there....