Table lamp

First time I printed something made in FreeCAD. It’s a table lamp for our balcony, more like a mood light than a real lamp hehe. Its made from 3 parts (base, tube and a hat). Base and tube are CA glued and I used some insulating tape to fit a hat tightly. The lamp is about 240 mm tall and its powered from 9V battery. Battery case and steel weight are glued with some blue tack (white tack lol) to hold it in the place. There are 2 LEDs and resistor soldered together in series. I might replace the leds with lower powered ones if battery goes out too fast, but time will tell. Im also thinking about different hats, but first iteration was quick and dirty, I love it!

More pics:

https://lemm.ee/pictrs/image/77539db6-6e53-4366-9f63-bdaf4dd0e5e9.webp

https://lemm.ee/pictrs/image/d347bbc1-5c4c-4fe7-9ce2-5e442674d735.webp

https://lemm.ee/pictrs/image/636de72f-7950-425e-845e-c3b40e6f7a4c.webp