Did a few arboreal things, such as making sure the leaves don't fall off, getting a better face on there and priming. Also basecoated the Wheelie Bin of Doom to go with my #CountBBFace team as a vargheist. Poll below about appearance.
All the eyes of my #Fedipaint elves have now been pre-whitened.
And I felt inclined to sculpting a face on one for a #BloodBowl treeman and I'm giving up immediately again 😬 may steal a Trish Carden face with oyamaru clay and stick that on.
And built v2 of my paint holder. Found out the 3mm plywood is 4mm and warped AF😬
Had some time to work on the giant, which is nearing completion. The #Fedipaint entry I've had enough of so I'll wrap it up in the coming days and fuck it
On the up side, I've has the honour of playing an inaugural match in the school #WarhammerAlliance stadium.
So I'm kind of liking the red highlighting now and I'm surprised that I don't want to take a power drill to the skin tone I created. I think I need more practice with these things ...and that this one needs more work ...
Started on a lazy tartan on the #BloodBowl sporting giant but am unsure: abort or continue?
Also built two #gaslands cars at the school #WarhammerAlliance. And the kids working on the stadium have finished it! Now to encourage students to have us print teams they can paint and use!
The titan's torso is assembled enough to get a glimpse at the final product and he's HUGE! For reference, the can of Zandri Dust spray primer is 7.75" tall and that chainsword is 14.75" long from tip of blade to bottom of powercell. This guy is a towering 22.5" tall and he doesn't even have his carapace armor, guns, or void shields on yet!
So I have still be doing my #HobbyStreak, just not really been posting due to a mixture of the family stuff and a dicky tummy, so let’s share what I have painted between days 77-84
If you've never seen one before, here's an Acastus Knight Porphyrion fresh out of cleaning bath to remove the mold release. This is going to be a big boy. That one hull chunk on the right is larger than the entire upper carapace of a Questoris/Abominant class knight, larger than a Cerastus as well by the look of it. This is why I haven't posted Titan progress lately.
I have been slowly plodding away with these Vigilors a little bit each day to keep up the #HobbyStreak, but posting has been not happening cause of some stuff at home
But here is a squad of Vigilors I have finished to show you for days 70-76
Taking a break from the Titan (not really, the epoxy is just drying) to paint something a little different. So I went ahead and painted up a couple Khorne Daemons to be allies, starting with two characters. These were fun to do and were relatively quick to paint. I'm especially proud of the Skullmaster's sword.
And that's just what they'll do.
Weekly progress update on the Warmaster Titan! The legs are fully assembled and posed. This is a BIG model. I'm fairly sure the sizing is within an acceptable margin of error based off the height chart GW put out. Especially given that the Knight has a waist extender giving it a bit more height.
While the Warmaster Titan's torso starts on the printer, it is time that I begin posing the legs. I had to get creative with how I tightened it down to keep the Gorilla Glue's expansion from moving it out of the pose I wanted. This guy is BIG as seen by the the Bloodmaster by its foot.
Hey there #WarhammerCommunity, I'm trying to make some basing for my titan and I need opinions. I 3d-printed these and then placed a sledgehammer on top before heating to simulate a crushed effect under the tread of the titan. Does it work or should I go for more?
#hobbystreak
Tonight I went back to hunting not lines and fixing gaps. I used both my sprue goo and some milliput, so I can compare. They're both sitting but I'm different ways. The goo was leaving threads of plastic (I think it was too thick), and was very hard to guide.
Milliput was too sticky and I had to prepare way too much for my usage, it was also starting to dry. I still preferred it. I added some solvent to the goo, see how it goes next time. #Warhammer#WarhammerCommunity#warhamfam
Since the Titan project eats up so much of the printer time, I have time to finish up some other projects that I've had sitting around. Here's a set of 3 Crisis Suit proxies that I'm printing for the group's T'au player.
One spool of filament down and we're up to the knees on the Warmaster Iconoclast. From the base of the foot to the top of the knee joint is 8.5 inches, so this is going to be a big one when it's done. Currently printing the thighs, which are a 25 hour print-job. Next update in a few days!
Knight Tyrant Complete!
Weather finally cooperated enough to allow for varnishing of 'Sardonic Feculence.' All that was left to do was to apply some Blood for the Blood God and Nurgle's Rot technical paints to achieve a suitably blood/pus-filled look.
Next on the painting desk: 'Slaughter's Serenity,' my Khorne Knight-Castigator. 'Death of Duty' is short! @warhammer40k@Bluesheep