tallship, to ukteachers

About twenty five years ago, we laid out the keels for a new adventure - The Twin Brigantine project, in the parking lot of the , next to the , in the old ferry building that was, along with a pontoon bridge, obviated by completion of the connecting the mainland to .

Up until that time, operated and sailed the 70' gaff-rigged topsail schooner, Swift of Ipswitch (previously James Cagney's personal yacht) for it's youth sailing program. It took a few years to complete the Irving and Exy Johnson, sister Brigantine vessels built and outfitted by dozens of volunteers over the duration of the program. At some point, another gaff-rigged schooner was borrowed and enlisted, the136' Bill of Rights filling the need for accommodations of a youth sailing program that had greatly expanded over time, with many ups and downs, achievements and disappointments, but building two square rigger tall ships for and by a non-profit organization dedicated to youth educational programs for the community, a truly novel pursuit, eventually came to a close as a great success.

This photo shows the 113' brigantine Irving Johnson, on 23 March 2005, and which, after less than three years of service, she had run hard aground on a sandbar following several storms that affected local charts, leaving them partially obsolete - in short, on her way into the Channel Islands harbor, well... sadly, the pic speaks for itself.

Another year and two million dollars later to repair structural damages and flooding, the once again joined her sister ship, , in the pursuit of education as , something that Irving and his wife Exy (Electa), following no less than 7 circumnavigations together, pioneered and championed in the 20th century aboard their three successive sailing ships - a , a , and a - each named the .

.

This image or file is a work of a United States Coast Guard service personnel or employee, taken or made as part of that person's official duties. As a work of the U.S. federal government, the image or file is in the public domain (17 U.S.C. § 101 and § 105, USCG main privacy policy)

tallship,

Questions always follow after such, 'salty talk', or 'nautical nomenclature', or in terms, .

What's the difference between a mizzen topgallant sail and a main royal staysail? Just a few rules is all it takes, but in today's world, one need only avail themselves of the basic Marconi rig on a single masted sloop. There's a mainsail (the big triangular one aft of the mast), and a jib, or foresail. Typically, when speaking about a jib (the one forward of the mast), people will typically categorize them into about three classes:

  • a (big one - low wind conditions)
  • a (also called a for most wind conditions)
  • a - smallish, for reduced sail area in high and gale force winds.

If you're rigged to run one jib, you're a ; two, and you're rigged.

tl;dr: Unlike elections, rigging is a good thing. Without standing rigging you have nothing to hold your masts up in place and they'll just snap or fall over. Without running rigging you have no way to control your sails, hoist them up, or catch the wind.

So when it comes to sailboats, it's a very good thing that they're rigged :p

HistoPol, to australia
@HistoPol@mastodon.social avatar

by @thejuicemedia

Republicans and Democrats, as well as voters and political pressure groups could learn a lot from when it comes to an in a two-party system:

https://youtu.be/N3WTlyuhDs0

Enjoy!

protecttruth, to TeslaMotors
@protecttruth@mastodon.online avatar

I will die on this hill:
We will not fix our democracy until we start doing criminal prosecutions of the wealthy again. Not just weakly using DPAs and fines
and prosecutions of corporations.

Musk and the hospital execs in the news today must face threats of jail.

No fine will ever break a billionaire— they just pay out some funds and move on. But criminal charges can take down their lifestyle and hold them truly accountable.

image/jpeg

mastodonmigration, (edited )
@mastodonmigration@mastodon.online avatar

@protecttruth Check it out! Tesla today advertises that their Model 3 range is 333 miles. Competitors generally fall in the 200 to 250 mile range and Tesla gets all sorts of positive press for their "range advantage." But it is all BS. Tesla's average is around 200 miles and in winter it can be as low as 124 miles. Still, they continue to be credited as the range leader. Lying works!

https://electrek.co/2023/07/27/tesla-vastly-overstates-its-vehicles-range-report-states/

https://www.tesla.com/model3

mastodonmigration,
@mastodonmigration@mastodon.online avatar

@protecttruth So, to be very clear here. Tesla has not only grossly exaggerated their vehicles range...

"Now, new Reuters reporting reveals how systematically Tesla managed that gap: by reportedly rigging its range estimation software, by manipulating what its dashboards showed drivers, and even by creating a “diversion team” to smother customer complaints."

https://slate.com/technology/2023/07/tesla-range-complaints-deception-electric-vehicles-battery-size.html

mastodonmigration,
@mastodonmigration@mastodon.online avatar

@protecttruth

"The directive to present the optimistic range estimates came from Tesla Chief Executive Elon Musk, this person said."

https://www.reuters.com/investigates/special-report/tesla-batteries-range/

andycuccaro, to Disney

My attempt at replicating the classic look of Mickey's ears on my rig...

video/mp4

TerryHancock, to science

​:lunatics_georgiana:​
My latest screencast follows me applying a ragdoll rig to the "Space Bunny" ragdoll that Georgiana has in our pilot:

https://tv.filmfreedom.net/w/bX2KtA58Ghkbrbc5LUGcZs

About 32 minutes, with commentary explaining what I'm doing.

waynedixon, to random

I rigged another character with my feature set. (The character is 'Rex' from iAnimate)

I'm quite happy with the way the spine turned out. It's a custom bendy bone chain with armature constraints that sits on top of the default rigify spine.

I tried many times over the years to get a something working this way.

A Robot cartoon bulldog is visible in the Blender UI. The user starts manipulating the rig controls to show what each of them does. The torso consists of 2 roundish hard metal chunks, one for the chest and the other for the pelvis area. The mid section looks like flexible pvc piping. In fact, all of he joints have a similar flexible piping design. When the torso stretches, this piping stretches in a very appealing way. The tail looks like a hard metal antenna but the user shows how it can bend and stretch further than any animator would ever want it to. The short stubby legs are connected to the torso and pelvis with a coupling which looking like rubber. This can slide around anywhere on the surface of the to assist the animator's to create a nice pose. The user grabs the head and stretches it forward, the neck extends in a similar way to the midriff. He little digital robot eyes are essentially just 2 circles that sit above a black panel. The user shows some sliders that change the shape to show them blink and squint. The large jaw with under bite opens wide and the teeth and lips can deform to create a seemingly endless amount of mouth shapes. The teeth and also super flexible, which is helpful when trying to make appealing mouth shapes. There's plenty more controls shown in this video, however, it's getting a bit late so the person writing this has to go to sleep. Have a pleasant day.

waynedixon, to random
  • All
  • Subscribed
  • Moderated
  • Favorites
  • megavids
  • rosin
  • Durango
  • cisconetworking
  • mdbf
  • InstantRegret
  • DreamBathrooms
  • ngwrru68w68
  • magazineikmin
  • osvaldo12
  • Youngstown
  • ethstaker
  • slotface
  • kavyap
  • JUstTest
  • thenastyranch
  • normalnudes
  • modclub
  • khanakhh
  • everett
  • tacticalgear
  • cubers
  • GTA5RPClips
  • anitta
  • Leos
  • tester
  • provamag3
  • lostlight
  • All magazines