Hey guys, I have a sofle v4 from 42.keebs which uses this switch on the inner side to switch it on / off when using the battery. www.aliexpress.com/item/32406053825.htmlI am currently building a 3d printed case which is made for a regular v2 so the switch does not fit. Do you guys know a vertical switch with the same footprint...
I would love to print this case for my Sofle v2 keyboard. Since I don’t own a 3D printer (… yet) I would like to do this by using an online printing service like PCBWay. Before I order, I do have some questions, since I have never printed anything....
I just found out about it. Open Source messaging. It seems intriguing although I’m not sure I would have much to do with it. I honestly can’t find too much information about it except for the website and a few YouTube videos. I was just curious if anyone has had experience with it.
Hi folks. Currently thinking of buying a new SBC since my Odroid HC4 died i am looking to buy a new sbc as my home Server. I would be mainly running portainer with the following apps:...
The Open Source Cartridge Reader is a great diy project for dumping your own roms and saves. If you order a kit with the surface mount components already installed, it’s also a great beginner soldering project.
There is a really cool looking diy one using a ESP32. You would need a server to go with it though. But using your own small HA server would give you way more control about storage / encryption.
Looking for good resources on scanning mostly flat textures. Tried to use a photograph of a tatami mat and had a lot of problems with the lens distortion. I don’t own any professional photo equipment so I have to use my Pixel 6 camera. I have a couple of Ideas but I’m not really sure how to tackle the problem. Using a 3d...
If you guys ever visit Japan, make sure to visit one of the many second hand stores. I would advice against visiting one in a touristy spot like Shibuya though. At least the ones I visited there seemed to be a lot more pricy. But even the shops in more rural areas have an awesome selection of clothes, which are in top shape. In...
Since its finally starting to cool down a bit in Japan, I am looking forward to finally wearing longer clothes and boots again. I have a favorite pair of mock toes. You guys have any inspiration for a good combo? Thought of maybe combining it with a wool or felt coat and a jeans.
My wife gifted me this super cute mini miffy diorama from a gachapon. It uses two 1,5V cells and has a tiny led in it. I would really love to to add a 24h timer. ( it should stay on for 4 hours after turning it on then go to “standby” for 20h before turning back on) Do you guys think an attiny85 is the right thing for the...
As the title says: I was thinking about getting into 3d printing for a long time now. The main thing I can think of when it comes to reasons for printing is keyboard building. Do you folks have any recommendations for a good entry-level printer that is able to print for example a Charybdis? Luckily I really like split keyboard...
Looking for switch with same footprint but vertical.
Hey guys, I have a sofle v4 from 42.keebs which uses this switch on the inner side to switch it on / off when using the battery. www.aliexpress.com/item/32406053825.htmlI am currently building a 3d printed case which is made for a regular v2 so the switch does not fit. Do you guys know a vertical switch with the same footprint...
A sentiment shared by many, I'm sure. (startrek.website)
Tooootally unrelated, I’ve already made it to Voyager.
Looking on advice on how to print this case (www.printables.com)
I would love to print this case for my Sofle v2 keyboard. Since I don’t own a 3D printer (… yet) I would like to do this by using an online printing service like PCBWay. Before I order, I do have some questions, since I have never printed anything....
What's your automatic vacuum's name? (lemmy.world)
I saw a couple of fun ones somewhere else, and it got me interested. My mom calls her’s: Mr de Vries...
FOSS Document Scanner with OCR (feddit.de)
Has anyone used meshtastic?
I just found out about it. Open Source messaging. It seems intriguing although I’m not sure I would have much to do with it. I honestly can’t find too much information about it except for the website and a few YouTube videos. I was just curious if anyone has had experience with it.
deleted_by_author
Is the Orange Pi 5 overkill for my needs?
Hi folks. Currently thinking of buying a new SBC since my Odroid HC4 died i am looking to buy a new sbc as my home Server. I would be mainly running portainer with the following apps:...
For When You Need To Backup Those Saves (i.imgur.com)
The Open Source Cartridge Reader is a great diy project for dumping your own roms and saves. If you order a kit with the surface mount components already installed, it’s also a great beginner soldering project.
Privacy Respecting Ring Doorbell Equivalent?
I couldn’t find a post in this community about cameras so I figured I’d make one. Requirements:...
Looking for resources on scanning textures
Looking for good resources on scanning mostly flat textures. Tried to use a photograph of a tatami mat and had a lot of problems with the lens distortion. I don’t own any professional photo equipment so I have to use my Pixel 6 camera. I have a couple of Ideas but I’m not really sure how to tackle the problem. Using a 3d...
Looking for combinations for wide toebox oxfords (www.etsy.com)
I know they look a bit goofy, but the wide toe box just feels great. Do you guys have some outfit suggestions for this fall?
Japanese second hand stores are a godsent
If you guys ever visit Japan, make sure to visit one of the many second hand stores. I would advice against visiting one in a touristy spot like Shibuya though. At least the ones I visited there seemed to be a lot more pricy. But even the shops in more rural areas have an awesome selection of clothes, which are in top shape. In...
Foregone Destruction (Facing Worlds) - Unreal Tournament (www.youtube.com)
Looking for good combinations with mock toe boots
Since its finally starting to cool down a bit in Japan, I am looking forward to finally wearing longer clothes and boots again. I have a favorite pair of mock toes. You guys have any inspiration for a good combo? Thought of maybe combining it with a wool or felt coat and a jeans.
Attiny85 the right choice for 24h led timer?
My wife gifted me this super cute mini miffy diorama from a gachapon. It uses two 1,5V cells and has a tiny led in it. I would really love to to add a 24h timer. ( it should stay on for 4 hours after turning it on then go to “standby” for 20h before turning back on) Do you guys think an attiny85 is the right thing for the...
Should I wait for the BPI R4 ?
Currently looking for a router with the following points...
Should I wait for the BPI R4?
Currently looking for a router with the following points...
This house I found in kawasaki (lemmy.world)
For some reason it gives me massive Kong studios vibes. I really love the extensive use of plants.
Kawasaki (lemmy.world)
Really fell in love with this house. It somehow remided me of Kong studios.
What printer do you use?
As the title says: I was thinking about getting into 3d printing for a long time now. The main thing I can think of when it comes to reasons for printing is keyboard building. Do you folks have any recommendations for a good entry-level printer that is able to print for example a Charybdis? Luckily I really like split keyboard...
The Daily Check-In for Saturday July 29th - Just for Today, We are NOT Drinking!
We may be anonymous strangers on the internet, but we have one thing in common. We may be a world apart, but we’re here together!...
Found this retro casio ring gacha in Japan (lemmy.world)