I think this is what’s going on. I’m guessing the smallest partition is the boot partition, the 1gb might be the Linux swap, and the 100gb the Linux install.
“as it’s called” or “as they’re called”? It’s a bit wordier but I think conveys the meaning you’re going for without the negative connotation. I also think context should usually direct a reader/listener to or from any negative connotation for the “so called” usage. That said, it doesn’t hurt to be clearer.
I have had this teapot about 3 months and in this last month it has been in constant use and yesterday these stains appeared, is it rust? Should I throw away the kettle or can it be saved?
I’m not a health expert, take this with a grain of salt. I’d be disappointed it was rusting, but also mostly shrug it off and keep using it unless it gets bad and flaky/scaley
How far northwest? If close enough to lake Superior, maybe a lake whitefish. If not very close to lake Superior or other deep lakes, possibly a white sucker or quillback, which I grew up calling a sheepshead.
Scroll through this and you can check out the whiter fish with larger scales.
I had to double check that my boozed up vision didn’t loose a couple zeros. Fuck CEOs across the board, hell, “C-suite” in general, but 1.5m is about the lowest I’ve heard for a CEO.
That said, their decisions are generally the real reason to hate on the Cs. The gap in pay is the hate cherry on top.
Edit: I’m reminded that base salary is a pretty lame comparator after reading another comment. Total compensation package is worth taking about.
This is just my opinion, but I don’t think so. I love the thought and wish there was, though. I think no matter what you do, it’s still information about a potential user/customer and still tells someone looking at it about you. “Oh, we have information on about 4% of the population that wants to actively subvert our data analytics.”. Obviously that’s made up, I didn’t bother trying to even guess what a potentially realistic number might be.
Again in my opinion, the only way to provide no value to data analytics is to not be a data point, and good luck with that. Best I’ve been trying to do is disable targeted ads anywhere I can, reset my identifier ids regularly on things like android tv where I can, and try to blast cookies anywhere possible. I don’t know if it even makes a difference or just makes me feel better
You basically described the other half of me right here. I waffle back and forth between your view and trying to do something about it. I go back to feeling it’s futile and doesn’t matter anyway, before getting fed up with targeted ads again. Wash, rinse, repeat.
Rodgers, who watched from his home in Malibu, California, said there were “too many little side conversations, and we just need to grow up a little bit on offense and lock in and do our jobs and not point fingers at each other – and that’s everybody. Don’t point fingers at the coaching staff, don’t point fingers at...
Will Hurts/Brown bounce back after underwhelming week 1 performances? Do we get another season of week 2 prime time Kirk vs the Eagles, will JJ be held in check vs Slay again? Which Eagles running back emerges with Gainwell out....
Nope, it uses blanks to launch large projectiles like cans. There is no barrel. I don’t know how or if they prevent real rounds from chambering but there is no barrel in the traditional sense. It attaches to a standard AR lower
OK (I’m the same guy who posted with the petg not sticking) Before Yesterday I bought overture petg and I was deceived because I had all kinds 1f issues… But then I tried to put the bed at 90C and the nozzle at like 280 ant it worked… How come i have to print this hot 🔥?
Is there a way you can confirm your bed or nozzle temps? I know for the nozzle that’s a really difficult thing to do, it’s so small to be able to check with anything.
I ask because with your unexpected crash the other day from your post history, I wonder if your main board has glitched.
A 90c bed shouldn’t melt petg I’d think, so something is definitely weird there.
Might be worth trying to reflash your firmware in case the glitch isn’t hardware.
What other mods have you done to your printer besides spring spacers?
When you level the bed, is it manually and with a piece of paper to help gauge the distance?
These things have so many places something can go off that it’s really difficult to help troubleshoot without being there. Hopefully something in this post helps you out.
Ok, yeah, forget the paper as far as regular leveling goes with the cr touch. Have you tried confirming your z offset since you changed the nozzle? If you haven’t, it should be fine every time you do something to the hotend.
Also make sure your heat block isn’t stripped out. I had a bitch of a time printing for a while only to discover I had overtightened my middle and stripped out the threads in the heat block. After I replaced it I had consistent good prints again.
We’ve done many of the same mods. Klipper, Skr, Sprite pro, crtouch. I did the dual z drive mod too, though I have no idea if that’s actually improved anything or not. Probably now that I’ve setup input shaping and have this thing whipping through prints.
Question about dual booting Linux + Windows on different SSDs (lemmy.dbzer0.com)
This was solved!!...
deleted_by_author
Is there an alternative to saying "so-called" which doesn't suggest potential falsehood?
As we see there are 2 meanings of “so-called” that can be confused or misinterpreted, of which one implies falsehood and the other doesn’t....
Are those rust spots? (lemmy.world)
I have had this teapot about 3 months and in this last month it has been in constant use and yesterday these stains appeared, is it rust? Should I throw away the kettle or can it be saved?
Can anyone tell what kind of fish this is from? (lemmy.world)
Northwest Wisconsin. Dropped from an ospray nest.
Walgreens pharmacy staff walk out, citing unsafe working conditions (www.washingtonpost.com)
I'm sure there's a compelling story to it, but it sure looks like Wisconsin is getting buillied. (startrek.website)
Is it possible to make my data worthless?
Inspired by a question I saw a while back, is it possible to make my data/online presence useless/undesirable to companies to purchase?
Deleted my 7 years old Reddit Account today
What the title says....
Aaron Rodgers: Jets offense ‘needs to grow up,’ not point fingers. (www.espn.com)
Rodgers, who watched from his home in Malibu, California, said there were “too many little side conversations, and we just need to grow up a little bit on offense and lock in and do our jobs and not point fingers at each other – and that’s everybody. Don’t point fingers at the coaching staff, don’t point fingers at...
Anheuser-Busch says it will no longer amputate the tails of Budweiser's Clydesdales (www.npr.org)
The beermaker says it will end the practice known as tail docking after it came under pressure by animal rights group PETA.
Pin Brawl! (freeimage.host)
Eagles vs. Vikings game thread
didnt see this posted so discuss
[Gameday Thread]Thursday Night Football Week 2 Vikings @ Eagles 8:15 ET Prime Video
Will Hurts/Brown bounce back after underwhelming week 1 performances? Do we get another season of week 2 prime time Kirk vs the Eagles, will JJ be held in check vs Slay again? Which Eagles running back emerges with Gainwell out....
How many people actually dropped Reddit for Lemmy?
It is possible to estimate?
Shut up and take my money (midwest.social)
Weird PETG Behavior
OK (I’m the same guy who posted with the petg not sticking) Before Yesterday I bought overture petg and I was deceived because I had all kinds 1f issues… But then I tried to put the bed at 90C and the nozzle at like 280 ant it worked… How come i have to print this hot 🔥?