Robotics/Kinematics - Rolling contact joints - YT upload today from Breaking Taps (files.catbox.moe)
This might be a useful reference to be aware of for projects, especially for very small designs....
This might be a useful reference to be aware of for projects, especially for very small designs....
Ok guys, I’m breaking down and posting here to see if anyone has any ideas. I’m greatful for any advice....
On the bottom of my prints, there’s an area of underextrusion and I can’t figure out what’s causing it....
Hi guys. Please check my previous post for any background questions, I don’t have it in me to go over everything again....
Hi guys, it’s The Clog Guy, thought I’d try to share something other than problems…...
I understand the intent, but feel that there are so many other loopholes that put much worse weapons on the street than a printer. Besides, my prints can barely sustain normal use, much less a bullet being fired from them. I would think that this is more of a risk to the person holding the gun than who it’s pointing at.
As I’m graduating college in a few weeks, I’ll be losing access to my university’s free printers and filament. I’m going to build up a home lab with a couple printers where I can make goofy little mechanical projects as well as some components for my cars and stuff....
First I’d like to say thanks to everyone for looking at these posts and trying to help, and sorry to anyone who may be annoyed. Trust me, I’m not happy either....
Hi - Tenlog TLD3-Pro, printing with branx new Overture PLA+, printing an OpenSCAD exported STL sliced with Cura 5.7.1 (most recent as of yesterday)....
Youtube video...
This is a follow up from my spaghetti post a few days ago....
Today we’re ecstatic to publish our first demo showing a homemade BusKill Cable (in the prototype 3D-printed case) triggering a lockscreen....
Made a FreeCAD tutorial for making this container: https://makertube.net/w/mg7rdKStSUua7AhnAt1RoM I have to warn you that I made a bunch of mistakes and it may be really hard to follow.
Printed out this little bathroom or whatever organizer. Gridfinity is neat. Choose your bins, glue to the base and viola....
I know it’s not a new problem, but I don’t know what I can or should do…...
I am woking on making solar panel mounts for the roof rack of my nissan xterra from TPU, since it can take a beating. Does any one have any experience with 3d-printed TPU threads? And how much stress before it can take before a bolt rips out? Also should i use teflon thread seal so the a bolt won’t come loose?
You can download the files on:...
I have recently obtained a friend’s old Formlabs Form 2 SLA printer. I I am an absolute beginner to printing, but I am pretty excited to get into it....
Source twitter.com/repkord/status/1788529858978717870...
I am using OrcaSlicer/BambuStudio with the P1P. Also, the hotend currently has hardened steel gears and a 0.8mm nozzle....
I’ve made a large number of custom prints, and all of them were created using TinkerCad. It’s an amazing toolkit, stupid easy to use but versatile. That is … until something needs a tiny adjustment somewhere. That’s when I feel it would’ve been neat to use parametric CAD instead....
OK guys, I finally found what the issue is, or at least kind of where it’s coming from....
STL printables.com/…/866603-carboy-dryer-stackable...