How do you build complex shapes? (i.imgur.com)
I’ve made a large number of custom prints, and all of them were created using TinkerCad. It’s an amazing toolkit, stupid easy to use but versatile. That is … until something needs a tiny adjustment somewhere. That’s when I feel it would’ve been neat to use parametric CAD instead....
2mm thick layers on a trophy cup (www.youtube.com)
It’s 1.75mm filament going into 2mm layers. lol, wtf. Still looks great, though.
Printing an Open Source Rad Power Bikes (Hailong) Battery Shell Replacement (www.youtube.com)
After printing ABS almost exclusively for about a decade, I'm rediscovering PLA and its fancy variants (feddit.it)
I think 1kg spools are too much, I want to experiment with ALL THE COLORS… But few manufacturers offer 250g, and they are sometimes twice the cost by weight. https://feddit.it/pictrs/image/2658590c-535c-4523-9dd2-25663ba7bc23.webp
SBC Case Builder v3.0 can create thousands of cases for popular SBCs and standard motherboards (www.cnx-software.com)
cross-posted from: lemmy.sdf.org/post/16042365...
[Troubleshooting] It's the clog guy again - temp readings are bad!
OK guys, I finally found what the issue is, or at least kind of where it’s coming from....
Very Specific Object: Redesigned brackets for SmartyKat brand Paw Perch Cat Shelf (lemmy.world)
In keeping with my usual tradition of harping on about the dumb shit I design and slap up on Printables:...
Are filament vacuum bags worthwhile?
I finally got a filament drying box and I’m using it prior to and during prints. It seems to be helping. I’m a bit of a color queen, so I keep a pretty big backlog of different filaments. I’ve been storing them in vacuum bags but the vacuum bags often seem to lose some of their vacuum after a few months; the whole process...
Stolen design being sold on etsy
I know it’s not a new problem, but I don’t know what I can or should do…...
(Troubleshooting) Filament runout detector not working.
Hey, my printer recently stopped working saying the filament ran out even though it was still in for use. I checked the sensor and sure enough it was worn down, so I replaced it. But now I’m getting the same message even though I just replaced the sensor and all the wires are connected back to the sensor and printer. If it...
Best options for entry level 3D printing available these days?
I’ve had access to a roommate’s 3D printer, but they’ll be moving away soon :(...
Print in place ratchet design (lemmy.ml)
After half a dozen iterations, this was the first reasonably working, acceptable feeling, and good-sounding ratchet mechanism....
Anyone have any tips or tools to help with managing slicer profiles using inheritance?
Does anyone have any tips or tools to help with managing slicer profiles using inheritance? I primarily use SuperSlicer but have been dabbling with Orca Slicer recently....
Modernizing the best Woodworking Joint to use for 3D Printing (youtu.be)
[Troubleshooting] [LONG] Clog test write up - this time with pictures!
First I’d like to say thanks to everyone for looking at these posts and trying to help, and sorry to anyone who may be annoyed. Trust me, I’m not happy either....
What causes this on PLA? Too little cooling? Or possibly too much?? (lemmy.world)
Anyone have any idea what might cause this sort of issue on PLA? I run into it frequently, but pretty much only when all of the following points are true:...
[Followup] Still working on that damn clogging issue!
Hi all. This is an update to this post. I don’t know what else the community can do to help, but I figured I’d throw some more content up there and give something bored people to look at....
Designed a print-in-place (Ender 3) mechanical keyboard for hand wiring (lemmy.world)
**EDIT: In the interest of full disclosure, I had a filament break about 1/3 through, but that’s okay because the partial PLA print was nowhere near strong enough along the layer lines. There are plenty of decent 3D printed keyboards out there that just need some assembly and post-processing, so if this one doesn’t work...
[SOLVED] Trouble with ASA prints (sopuli.xyz)
[SOLVED] cause: not enough cooling for overhangs...
[Troubleshooting] Cannot fix a clogging issue.
Hi everyone, I’m having constant clogging issues with my printer that sprung up out of nowhere. I’m running out of things to test....
Need some advice on scanning
I’m having a bit of a hard time with this, but I also acknowledge this is still relatively niche still....
Shit posting but 3d this time (files.catbox.moe)
Print failed because the layer adhesion is shit on my printer.
I knew the Orange Storm Giga was huge, but jeez. (i.imgur.com)
Source twitter.com/stlDenise3D/…/1780245895595921589
To failures in (basically) the exact same location eh? Correlation? I (hope) not! (lemmy.world)
The printer is a Voron 2.4, the extruder is a StealthBurner, and the hot end itself is a Rapido MK1. I’m printing Polymaker ASA on a spool that hasn’t given me any grief thus far (I last printed with it a few days ago) and am slicing with Orca Slicer....