The original was held in with 2 big screws, stapels and a prayer. This is held in with 3 machine screws, the 2 big guys and it ain’t going anywhere.
Got a new Crosstrainer and wanted to be able to easily mount my iPhone on it. On Amazon every fitting piece was around 35€. I had an old MagSafe Ring laying around, so I designed the mount around it, glued everything together and strapped it to my Crosstrainer using a cable tie. Works perfect!...
removed some material to speed up print, still works great. geometry gives enough support. used 2 drywall self taps.
This holder can allocate 8 wide USB sticks, 8 SD cards, and up to 15 MicroSD cards. Ideal for your desk, to keep your portable storage in a single place when you need them. It has holes to prevent from dust accumulation, and reduce a little the material used to print it. * This design is an improvement to USB and SD card holder...
Print two of these, and bolt them together. Holds the 5 Resources and 3 Commodities Cards
Here is an adapter to fix common broom in UE. This adapter is designed for 20mm ID stick, and 20mm OD coarse thread (tapered). Can be reinforced as pictured with 4 screws (here: thermoplastic Pozi 3x10) Voici un adaptateur pour réparer un modèle de balai très répandu en Europe. Il est conçu pour s'adapter à un manche de...
A comprehensive mapping of old subreddits to new communities.
Sorted by keyboard layout, so I find the right one quick.
I created what I am calling a “Solder Board” which is like a breadboard but with no internal connectors. The solder board is used for soldering of course. Specifically, for soldering pins onto PCBs, and in this case, onto microcontrollers.
hi lemmy! thought i'd share the intersection of my two main hobbies—sewing and 3D printing. working on the MYOG chonky sling and i couldn't find slik clips locally, so i decided to design and print them! here i'm holding up my sewing machine, and i've pulled pretty hard on them. i think they can take >40lbs as printed in...
Helps prevent rails popping out from high wind and helps transfer load between posts.
Designed this game holder to angle the games so they would fit in my entertainment unit slot. It's come out beautifully and I wanted to share. It's modular so you can print more slots as you get more games. No supports required....
Hey guys, First of All sorry for this Posting. But i am already on a lemmy instance and Reaaaally want to se this sub from my Account....
Simple and works. My only vac hose had two different ends, and I needed them to be the same large diameter type, so I created this adapter.
An adapter that connects the large hose from Rigid shop vacuum to the sander. Bought a new shop vac and needed a hose adapter to connect it to my old Black&Decker ⅓ sheet sander.
Into video + a tutorial for OpenSCAD for parametric custom changes to the magnetic labels : https://youtu.be/lzuqFiw_w4Q...
