My partner and I occasionally play games together, but they pretty much only play word puzzle games on their own. I’m not very good at word games though, and they don’t have very good spatial skills, so we frequently find ourselves mismatched. We have a switch and a single decent gaming pc, and a pretty old laptop....
My wife and I really enjoyed playing The Quarry together. It’s one of those games where it is more of a movie with decisions so I would do all of the controls and she would do the decisions.
Assume that the future can change based on your actions, so any historical information that you bring along with you from the intervening 25 years may quickly drift out of the new realities history....
I’ve been looking to switch the bowden extruder for a direct drive type on my Anycubic Kobra Max. I’ve always hated the blobbing and stringing due to the bowden mechanism. After having received an LDO Orbiter v2.0 today and a bit of tinkering, I now have what I was after :)....
Nice move! I think you have it correctly mounted though, I wouldn’t put it on a bracket. I used a conversion bracket for direct drive on my Max and I kept getting pulsing issues.
I think they were due to the filament pushing down the hotend slightly when starting to extrude because the hotend is mounted on the compliant strain gauge mount. With your method, it stays isolated and doesn’t push down more on the strain gauge mount when the extrusion starts.
Please give me an update if you can if you run into any other problems!
I personally like the strain gauge as a leveling mechanism, particularly since I added a magnetic build plate. I like the idea of #2, I wonder if you could use a M10 male to make adapter like this: www.ebay.com/itm/404101432925?chn=ps&norover=…
And just connect your adapter plate to the hotend (or tap the orbiter? Idk)
You might need a little printed spacer and a short Bowden tube inside that.
Other little nice things/learnings for the printer I have done other than the spring steel sheet:
If you want an all metal hotend you can replace the heartbreak with a slice engineering copperhead heartbreak (use a G2 type)
If you want color change capabilities, to have finer z adjust, and to have a larger mesh, i recommend trying the following custom firmware (IF YOU ARE CONFIDENT WITH THIS KIND OF STUFF)
Mostly just for removal! I print a lot of giant pots for my houseplants and I’m impatient.
Let me know how the Manta goes, I have a duet wifi I was considering using for this that is currently on an old project. Has someone made a wiring diagram for the harness or are you just redoing all of the wiring? Last I looked I couldn’t find a Pinout diagram for either the harness or the board.
I just started a fresh run with a friend a couple days ago. I sort of have my DM hat on and am just letting her go around, making her own decisions and mistakes. This is also the first CRPG she’s ever played, and she accidentally clicked on Lae’zel when trying to break her out of the tiefling trap. I was amazed they gave...
I’m having a blast playing 4 player co-op with some buds! The DM of our DnD campaign moved and hasn’t had the chance to set up his computer for our Foundry VTT so this has been a bunch of fun in the meantime.
Finally looking to build a new rig after about 7 years on my current machine. Will largely be used for gaming in Linux, although I may wind up throwing in a second drive for dual booting to Windows for games that don’t work well on Proton/Wine. Also using it as a home theater box for streaming content....
Looks pretty solid! I’m a fan of the air cooler, I’ve built with both and after having the pump fail suddenly on my AIO I won’t use anything other than air.
One thing to double check would be RAM clearance for your CPU cooler vs the height of your RAM. Idk if pcpartpicker checks that and it would suck to get into your build and have it not fit correctly.
I am and all my life have been a Linux user, I have nothing against Windows or MacOS, I just like Linux, and lately I have been experimenting with Windows in a virtual machine and I don’t really know much open source software there apart from the one that is cross-platform like Firefox or Joplin....
Idk what this guy is using, but I’ve installed wham bam flex plates on 2 large resin printers and I consider it almost a requirement. It makes print removal super easy and installation is real easy.
I’m a big fan of welding parts together using a 3D pen and the filament I printed with. Then, if it’s not super clean, I make the edge flush with a small chisel.
That or uv adhesive to tack parts together and then CA glue and remove the adhesive.
Didn’t know what it was walking out of the store. Just bought it because I was curious about what was written on the back and it was $6. Turns out it is a Wagner made skillet for a company that existed around 1907-1920s.
I just got a location near me and I’m curious about your thoughts. I currently get the bean burrito and fiesta veggie burrito as they’re cheap and vegetarian. What items do you like making or hate making? Any recommendations?
I’ve got an Anycubic Kobra Max at home for big prints that is relatively reliable and a corexy poject printer cobbled together from about 10 different sources.
I’ve really enjoyed the trackball in the center with my split Helix setup. Switches: Sunsets (shout-out to lowprokb!) Keycaps: MBK with printed LDSA thumbs because they’re so comfy Basic case designed and printed by me.
Thanks! Space is the 2U dark blue on the bottom on the left side (and one of the 1U dark blues on the right). Return is the bottom left grey key on the right side. Scroll lock is… Nonexistent since I never use it lol although I’ve been adding in a lot on my second layer so I could add that need be.
Finger operated right trackball in the middle has been very ergo for me, I used to have a symmetrical Kensington orbit which I liked well enough but it broke on me. I find tilting the trackball in the orientation of my arm works well enough to move my right hand between the right side and the middle.
I agree with your sentiment on thumb balls, I used to use one but found it worse for my hand overall and my thumb started hurting.
I had a room without much light and wanted to put some plants in there too, so I designed an adapter for my wall planters. It has a drip tray to catch water and a mount for an LED grow light!
I’ll try to remember when I get home, thanks! I’m not sure if the pots themselves are still sold but if anything I’ll upload my re-creation of it to print.
Or at least half of it. Finishing up the second half now but I couldn’t wait to share. XDA Canvas, Milky Yellows, and a case by the talented NGM Design: www.thingiverse.com/thing:4145471
Recommend a game for me to play with my partner
My partner and I occasionally play games together, but they pretty much only play word puzzle games on their own. I’m not very good at word games though, and they don’t have very good spatial skills, so we frequently find ourselves mismatched. We have a switch and a single decent gaming pc, and a pretty old laptop....
Epub Site
Anybody have any recommendations for public or private trackers for ebooks? Looking mainly for epub files.
If you had a one-way ticket to Jan 1, 1999 that departs on Jan 1, 2024, and you are allowed to bring whatever fits into a backpack with you, what would you bring to use to take over the world, and how would you use it?
Assume that the future can change based on your actions, so any historical information that you bring along with you from the intervening 25 years may quickly drift out of the new realities history....
Kobra Max direct drive mod and insulation (lemmy.world)
I’ve been looking to switch the bowden extruder for a direct drive type on my Anycubic Kobra Max. I’ve always hated the blobbing and stringing due to the bowden mechanism. After having received an LDO Orbiter v2.0 today and a bit of tinkering, I now have what I was after :)....
Play multiplayer if you have the opportunity!
I just started a fresh run with a friend a couple days ago. I sort of have my DM hat on and am just letting her go around, making her own decisions and mistakes. This is also the first CRPG she’s ever played, and she accidentally clicked on Lae’zel when trying to break her out of the tiefling trap. I was amazed they gave...
Looking for feedback on a new build. (pcpartpicker.com)
Finally looking to build a new rig after about 7 years on my current machine. Will largely be used for gaming in Linux, although I may wind up throwing in a second drive for dual booting to Windows for games that don’t work well on Proton/Wine. Also using it as a home theater box for streaming content....
What open source programs do you recommend for Windows? (Windows exclusive or not)
I am and all my life have been a Linux user, I have nothing against Windows or MacOS, I just like Linux, and lately I have been experimenting with Windows in a virtual machine and I don’t really know much open source software there apart from the one that is cross-platform like Firefox or Joplin....
Be honest folks, how bad are y'all's resin build plates? (files.catbox.moe)
It still prints great, but damn is it not that pretty anymore...
How do you bond parts together and hide the seams?
When you make something that’s too big for your printer, how do you hide the seams from bonding when aesthetics are a priority?
Picked up a Wagner Advertising Skillet at the Thrift Store. (lemmy.world)
Didn’t know what it was walking out of the store. Just bought it because I was curious about what was written on the back and it was $6. Turns out it is a Wagner made skillet for a company that existed around 1907-1920s.
The distribution of this bag of hi chews
I mean technically I get at least 1 of each…
Employees of Taco Bell, what do you recommend or hate making?
I just got a location near me and I’m curious about your thoughts. I currently get the bean burrito and fiesta veggie burrito as they’re cheap and vegetarian. What items do you like making or hate making? Any recommendations?
What is every here printing with?
Currently using a FLSUN Super racer. It’s a delta style printer and fast as hell compared to the printers I had before. 400 hours on it currently....
My Work Setup: A Low Profile Helix (lemmy.world)
I’ve really enjoyed the trackball in the center with my split Helix setup. Switches: Sunsets (shout-out to lowprokb!) Keycaps: MBK with printed LDSA thumbs because they’re so comfy Basic case designed and printed by me.
I designed and printed some adapters for my wall planters! (lemmy.world)
I had a room without much light and wanted to put some plants in there too, so I designed an adapter for my wall planters. It has a drip tray to catch water and a mount for an LED grow light!
I designed some adapters for my wall planters (lemmy.world)
I made adapters for my wall planters with a drip tray and a grow light attachment so that I could mount them in one of the darker rooms in my house.
Let's Split (lemmy.world)
Or at least half of it. Finishing up the second half now but I couldn’t wait to share. XDA Canvas, Milky Yellows, and a case by the talented NGM Design: www.thingiverse.com/thing:4145471
Can't wait to type away on those (lemmy.world)
Tomorrow my first ergo arrives, a corne from keebmaker!