@smellsofbikes@mastodon.social avatar

smellsofbikes

@smellsofbikes@mastodon.social

electron rancher, bicycle medic. Colorado. Ex-G+ user. Femtoinfluencer.
Some current projects: 3d printed, lost-PLA casting of a fuel injection manifold for an old car, building/characterizing a peltier cooler based atmospheric water generator, restoring retrocomputing equipment for the Media Archaeology Library at University of Colorado Boulder, and trying to improve my jumping skills enough to do a mountain bike jump over train tracks. 少し日本語を話します。

This profile is from a federated server and may be incomplete. Browse more on the original instance.

smellsofbikes, to random
@smellsofbikes@mastodon.social avatar

I'm trying to test thermal shutdown on an IC: if it gets hot enough, does its thermal regulation work? It has: an ADC measuring die temp via bandgap, a hardware bandgap that cuts function at a specific temperature, and a write register that you can set a value into so when it exceeds that value it shuts down. The important one, the hardware that should cut the power section, is way off. It hasn't tripped at 200C.
So today I talked to a running chip through liquid solder. That's a first.

qlp, to random
@qlp@linh.social avatar

If there is one thing that really, really, really gets on my nerve is when someone comments, "people still use $product?" in an post about a commonly used product (especially one that has become the new IE6).

How deep in your insular bubble are you? Really.

The mentality of, "Well, I don't use $product, therefore there is no reason for $product to be used or exists!" is extremely frustrating. It doesn't only exist in the tech world (looking at you car enthusiasts!).

smellsofbikes,
@smellsofbikes@mastodon.social avatar

@qlp or [company] is dead right? about a company that's doing just fine but haven't released a new product this year.

smellsofbikes,
@smellsofbikes@mastodon.social avatar

@qlp my coworker does something related: constantly angry at software that has default settings very different than how he uses it, even though his use is extremely niche. We're using financial analysis software for stats evaluation of manufacturing.

MLE_online, to random
@MLE_online@social.afront.org avatar

A rare, but not unheard of approach to handlebars for

smellsofbikes,
@smellsofbikes@mastodon.social avatar

@MLE_online Before mountain bikes took over, this was ubiquitous around here, but now 85% of used bikes are mountain bikes without the option.

danirabbit, to random
@danirabbit@mastodon.online avatar

I started Japanese Duolingo and I’m so bad at my hiragana. I forgot everything from high school lol turns out 20 years is a long time

smellsofbikes,
@smellsofbikes@mastodon.social avatar

@danirabbit I've been working on that for a while. Have you looked at Busuu? Very similar, ads more irritating, but I think overall slightly better.

smellsofbikes, to random
@smellsofbikes@mastodon.social avatar

Kaman k-max helicopter with dual intermeshed blades and no tail rotor. It sounded really weird when it flew over, more whoosh whoosh than chop chop.

smellsofbikes,
@smellsofbikes@mastodon.social avatar

Cool this thing has blades made of spruce!

hanakogames, to random
@hanakogames@mastodon.gamedev.place avatar

One week since the accident and my leg bruises are still really bothering me, I've been rubbing cold packs on my leg today.

smellsofbikes,
@smellsofbikes@mastodon.social avatar

@hanakogames wait wait wait what happened? Are you okay?

smellsofbikes, to random
@smellsofbikes@mastodon.social avatar

A dubious idea I have about cutting curved dovetails so a box would look like an impossible dovetail box, but would in fact have the top open on an arc rather than a diagonal slide like most impossible dovetails.
The axis of rotation is the left corner, where there's a green line.

smellsofbikes,
@smellsofbikes@mastodon.social avatar

It took a lot more math than I expected to make the intersections of the dovetail arcs the same width for both radii. If I were better with freecad I could make this a constraint and have the system calculate it.

smellsofbikes,
@smellsofbikes@mastodon.social avatar

@GustavinoBevilacqua One kinda neat thing about this is you could put the center of rotation at a number of different points and have different lid slide behavior depending on which it is. As the axis of rotation tends towards infinity, the behavior tends to be a slide, of course, but as it gets closer to the box, or even inside the box, the behavior gets pretty weird.

smellsofbikes,
@smellsofbikes@mastodon.social avatar

@mcdanlj I have been thinking about how I'd actually cut this. It's really cool that you took this on and I learned a bunch by looking at how you modeled it.

smellsofbikes,
@smellsofbikes@mastodon.social avatar

@kbob oh that's cool! I didn't think to try 3d printing it. I have a small CNC mill.

smellsofbikes,
@smellsofbikes@mastodon.social avatar

@mcdanlj I was not because I definitely don't have the patience to try to make a dovecutter. Although for wood I guess that might not be so bad.

smellsofbikes,
@smellsofbikes@mastodon.social avatar

@done I used the cutting revolve on this, and my math was crummy: drawing it out on graph paper and doing some trig to figure out the length of the intersecting angle was and then just assigning a value to that constraint in the sketch. @mcdanlj did a much better job in his version of it, also in the replies.
Freecad is for sure a higher learning curve. I've been using it for years so I'm kinda used to it.

smellsofbikes,
@smellsofbikes@mastodon.social avatar

@mcdanlj I would LOVE to see this, and was thinking about doing the same thing. Or giving it a run on the cnc mill and seeing if a 60 degree dovetail in pine would cut something that was Good Enough.

smellsofbikes,
@smellsofbikes@mastodon.social avatar

@mcdanlj I've played with a couple of the Assembly workbenches and whew, the amount of work I felt like I had to go through to get something moving the way I intended was really high... but it's been at least two years since I last battled that, and I know they've been working on that.

jerzone, to random
@jerzone@techhub.social avatar

Question for any woodworkers: how resilient are electric planars to screws and does it even make sense to plane old deck boards to reuse? I was thinking of flipping them over.

smellsofbikes,
@smellsofbikes@mastodon.social avatar

@jerzone A screw will in my experience completely and utterly trash the planer blade. Even if it has carbide blades. Can't resharpen that much damage, new blade time.

Kb9vbr, to random
@Kb9vbr@mastodon.radio avatar

What’s the most awesome thing I saw at Hamvention? It has to be the 1964 Ford Econoline full of Collins S-Line gear

1964 Ford Econoline Van labeled “Collins Radio Company Comminications Van”. on the roof are several vintage Hustler antennas

smellsofbikes,
@smellsofbikes@mastodon.social avatar

@Kb9vbr I feel like @MLE_online should see this

smellsofbikes,
@smellsofbikes@mastodon.social avatar

@MLE_online The design, the chair, the colors, everything.

smellsofbikes,
@smellsofbikes@mastodon.social avatar

@rose_alibi @shimmeringtrashpile @MLE_online Big ol' coiled up antenna that snaps upright when you unzip the enclosure, over-the-ear headset, batteries down at hip height...

Mrfunkedude, to random
@Mrfunkedude@mastodon.social avatar

Which animal would you be the most afraid of if it gained thumbs?

smellsofbikes,
@smellsofbikes@mastodon.social avatar

@Mrfunkedude I mean raccoons already have thumbs so too late there I guess.

MLE_online, to random
@MLE_online@social.afront.org avatar

There are several extraordinarily large flies in the office, which in my experience, means there's a dead rat somewhere in the building

smellsofbikes,
@smellsofbikes@mastodon.social avatar

@MLE_online In my workshop that always meant a squirrel had gotten electrocuted in the wall again.
So many flies.

rose_alibi, to random
@rose_alibi@post.lurk.org avatar

i know my neighbor is a bad person because he never ever answers the door when i knock. even on the door that is only accessible by our yard.

smellsofbikes,
@smellsofbikes@mastodon.social avatar

@rose_alibi @MLE_online ......I want to get in on this business model

smellsofbikes, to random
@smellsofbikes@mastodon.social avatar

I mean I'm a pretty fast rider but I feel like this is unusually fast...

smellsofbikes,
@smellsofbikes@mastodon.social avatar

@chrishuck true story: a friend wrecked very badly, broken collarbone, punctured lung, semiconscious, and his gps track recorded the ambulance ride to the hospital, so his track shows him riding along at like 50km/h, then a long pause, then a sustained 120-140km/h bit.

  • All
  • Subscribed
  • Moderated
  • Favorites
  • •
  • megavids
  • kavyap
  • DreamBathrooms
  • thenastyranch
  • magazineikmin
  • InstantRegret
  • GTA5RPClips
  • Youngstown
  • everett
  • slotface
  • rosin
  • osvaldo12
  • mdbf
  • ngwrru68w68
  • JUstTest
  • cubers
  • modclub
  • normalnudes
  • tester
  • khanakhh
  • Durango
  • ethstaker
  • tacticalgear
  • Leos
  • provamag3
  • anitta
  • cisconetworking
  • lostlight
  • All magazines
    •